Which glue for softop

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
emexv
Fast Driver
Posts: 470
Joined: Wed Sep 06, 2006 6:24 pm
Vehicle: NB SE
Location: Melbourne. Down on the Peninsula
Contact:

Which glue for softop

Postby emexv » Sun Jul 13, 2008 9:05 pm

I need to glue my softop back onto the rails. I don't want to going doing trial and error as it could get rather messy. Is there a glue that is best for this job?
Cheers
Mark

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Postby Okibi » Sun Jul 13, 2008 9:24 pm

Chat to the people at your local clark rubber, I think they sell something that will suit.
If you had access to a car like this, would you take it back right away? Neither would I.

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Postby Mr Morlock » Mon Jul 14, 2008 9:55 pm

Take a look at something like Selleys Kwik Grip- this glue can be used for a variety of things- always very handy in the garage. I cannot recall what group these were called but a number of makers have this style- yellow in appearance bonds a number of substrates - easy to apply with brush or sponge- clean up turps. You apply let it get tacky add some pressure and leave. . I have used it recently to glue carpet to rubber with full success and it is easy to work with. Do not use super glues. A 250ml tin goes a long way and ready for the next job Nevertheless you can ask a knowledgeable retailer or maybe one of the manufacturers has a tech line.

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

Postby wun911 » Tue Jul 15, 2008 10:27 am

Has anyone used epoxy?
every ounce counts

User avatar
Matty
Racing Driver
Posts: 1652
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB8A
Location: Melbourne
Contact:

Postby Matty » Tue Jul 15, 2008 3:04 pm

epoxy is a two-part mixture. You could save weight by only using one part.

User avatar
Wuey
Fast Driver
Posts: 284
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Melbourne
Contact:

Postby Wuey » Tue Jul 15, 2008 3:05 pm

+1 on Shelley's Kwik Grip. I always have a small tin in the garage. My softtop is holding on just fine seven years after the first couple of applications. Only problem is its obnoxious fume before it's completely dry. You'll get high in that confined space when you're using that stuff.
Image 2004 SE

User avatar
Hot Rodders
Racing Driver
Posts: 1858
Joined: Mon Nov 14, 2005 10:35 pm
Vehicle: NB8A
Location: Melbourne, again!
Contact:

Re:

Postby Hot Rodders » Tue Jul 15, 2008 3:16 pm

Matty wrote:epoxy is a two-part mixture. You could save weight by only using one part.


*Looks around for Wun99*
Evo, Its not a Dirty Word! Good As Gold.
President Bendigo Gliding Club
www.bendigogliding.org.au
Image

User avatar
PUR157
Racing Driver
Posts: 967
Joined: Sun Sep 17, 2006 5:26 pm
Vehicle: Clubman
Location: Sydney, Capital of Australia
Contact:

Postby PUR157 » Tue Jul 15, 2008 3:21 pm

Epoxy doesn't work well with only one of the constituents does it...?? :shock:
Oneness of Man and Machine
Image

User avatar
emexv
Fast Driver
Posts: 470
Joined: Wed Sep 06, 2006 6:24 pm
Vehicle: NB SE
Location: Melbourne. Down on the Peninsula
Contact:

Re:

Postby emexv » Wed Jul 16, 2008 1:09 pm

Matty wrote:epoxy is a two-part mixture. You could save weight by only using one part.



I think youv'e been sniffing too many fumes Matty :roll: :roll:
Cheers
Mark

whoa_dang_96
Driver
Posts: 88
Joined: Mon Mar 06, 2006 4:40 pm

Which glue for softop

Postby whoa_dang_96 » Thu Jul 31, 2008 9:18 am

My advice - don't wast your time with any commercially available product from Home Bunning 10 or similar - I know from experience.

High tail it down to your local paint and panel wholesaler (the local shop where panel shops by tape and sand paper etc) and get a tube of 3M Weather Strip adhesive - it looks like a big toothpaste tube, is about 18 dollars but has the same properties as contact cement but is heat resistant and sicks vinyl to material which is rought the 2 surfaces you will be bonding.

Don't let them sell you any Sikaflex product cause they just dont work.

User avatar
Tezzax5
Racing Driver
Posts: 908
Joined: Mon Jun 11, 2007 12:00 pm
Vehicle: NB SP

Which glue for softop

Postby Tezzax5 » Thu Jul 31, 2008 9:43 am

Another one to consider....Shoogoo 2 ? (Not sure of the spelling :frown: )

I have used this amazing product for repairing zips in my softtop as well gluing slate tiles back onto the pool coping.

It dries but still remains flexible....but it does take a day to cure

User avatar
emexv
Fast Driver
Posts: 470
Joined: Wed Sep 06, 2006 6:24 pm
Vehicle: NB SE
Location: Melbourne. Down on the Peninsula
Contact:

Which glue for softop

Postby emexv » Fri Aug 01, 2008 8:53 pm

Well I decided to give the old Araldite a go. Went to the cite and back for the Fed square display and it held up well. Will have to see how it lasts now.

PS..........Matty I used both parts :D
Cheers
Mark

User avatar
Miata Bart
Fast Driver
Posts: 221
Joined: Sun Jun 27, 2004 6:21 pm

Which glue for softop

Postby Miata Bart » Sun Aug 10, 2008 4:56 pm

Black silastic is a gift from God when it comes to bodgeying soft tops. I found the original Dow Corning product to be the cats pyjamas. It sticks like poo to a blanket and remains flexible and is UV stable etc etc etc.

Im suprised that no one suggested Tarzan's Grip, its useless for everything. Except making jokes eg:

Boy goes into shop and says "can I have a grip of Tarzan's tube?"

Shop keeper says "what????"

Boy repeats "CAN I HAVE A GRIP OF TARZAN'S TUBE?"

Shop keeper askes "Do you want the stuff that sticks or the stick that stuffs?"


Same boy, different shop, this time its a fish & chip shop

Boy says "Have you got any chips left?"

Shop keeper says "Yes"

Boy says "thats your fault for cooking too many".


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 155 guests