Idle dip, be gone!

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

Post Reply
RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:
Contact RG.net

Postby RG.net » Mon Jul 14, 2008 4:14 pm

legend! thanks
http://Run-It-Hard.com - We're here to have fun!
Top
satanoperca
Learner Driver
Posts: 23
Joined: Sat Feb 17, 2007 9:38 pm
Vehicle: ND - 2 GT
Location: Melbourne

Postby satanoperca » Mon Jul 14, 2008 9:37 pm

Drove the car around the city and on the freeway today.

Running smooth and controlled. No idle dip, what a difference. The petrol gauge was no running down as quick as before but only time will tell.

I also several weeks ago, while I had idle dip I advanced the timing to 12 degrees from 9 degrees. This made the engine a little more responsive in the low end which I had lost when putting a cold air intake on.
Top
RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:
Contact RG.net

Postby RG.net » Mon Jul 14, 2008 10:36 pm

i drove around to my missus's work, i still experience a slight idle dip of about 100rpms, only on dead stops but. but it feels like it wants to start now, and drive! and my fuel gauge hasnt budged :). you guys reckon that the ecu has adapted to the old 02 sensor? it dips just a little and runs really rich still.
http://Run-It-Hard.com - We're here to have fun!
Top
User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:
Contact TieNN89

Re:

Postby TieNN89 » Mon Jul 14, 2008 11:33 pm

Garry wrote:I think you'll find that you need to crimp the wires. Solder doesn't work.


really?

thats weird
Top
matt9111
Fast Driver
Posts: 198
Joined: Mon Jun 23, 2008 9:56 am
Vehicle: NB8B
Location: Melbourne

Postby matt9111 » Tue Jul 15, 2008 8:36 am

Wow, why would the O2 sensors always break on our cars, I have noticed it on both mine and my girlfriends. Im getting 2 lol
Great looking 02 BLACK NB8B, Tein S Tech Coils, Whiteline Adjustable Sways F&R, Carbing Alloy Rear Strut Brace ;)
Top
User avatar
Okibi
Speed Racer
Posts: 10906
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Postby Okibi » Tue Jul 15, 2008 9:35 am

They're a perishable item, Bosch says they should last about 160,000 kms.
If you had access to a car like this, would you take it back right away? Neither would I.
Top
User avatar
metris
Fast Driver
Posts: 167
Joined: Tue Aug 21, 2007 1:52 pm
Vehicle: NA6 - Turbo
Location: Sydney

Postby metris » Wed Apr 01, 2009 12:39 pm

satanoperca wrote:oem wires.
2 black = heater
1 white = ground
1 blue = signal

Generic 02
2 white = heater
1 gray = ground
1 black = signal

Benjamin


How do I go about testing which wire is which if I buy a generic 02 sensor?
Electronics is not my forte... :P
NA6 turbo cute scary fun machine!! :D
Top
User avatar
Locutus
Racing Driver
Posts: 879
Joined: Thu Jul 26, 2007 7:39 pm
Vehicle: NB SP
Location: Sydney
Contact:
Contact Locutus

Postby Locutus » Wed Apr 01, 2009 4:57 pm

AZNTieN wrote:
Garry wrote:I think you'll find that you need to crimp the wires. Solder doesn't work.

really?

thats weird

it's because the wires are stainless steel. not impossible, you just need different solder and a very hot iron. but crimping is easier and works better in this application anyway.


metris wrote:
satanoperca wrote:Generic 02
2 white = heater
1 gray = ground
1 black = signal

which wire is which if I buy a generic 02 sensor?

:roll: :lol:
Top
User avatar
metris
Fast Driver
Posts: 167
Joined: Tue Aug 21, 2007 1:52 pm
Vehicle: NA6 - Turbo
Location: Sydney

Idle dip, be gone!

Postby metris » Wed Apr 01, 2009 5:10 pm

lol, i didnt realise all generics were the same... but it would seem that they are! :oops:
NA6 turbo cute scary fun machine!! :D
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 4 guests