Help Interior Lighting Kit

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Help Interior Lighting Kit

Postby Regie » Wed Jun 25, 2008 1:32 pm

i bought one of mx mania yesterday and was starting to install it, but for the heck of me i cant find the plug that is under the dash. it only has 2 wires coming out of it, its suppose to be up around the fuse box area but i cant seem to find it.
the car is a 2001 NB btw.
Does anyone have any picys of where this would be located?

Cheers in advance
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

silvermiata
Fast Driver
Posts: 202
Joined: Tue Jul 31, 2007 7:59 am
Vehicle: NB8A
Location: Sydney

Postby silvermiata » Wed Jun 25, 2008 3:31 pm

3 wires are coming down from the passenger side kick panel. just take off your glove box (really easy) and you will see the 3 wires running. 1 is door tirgger, one is 12+ and one is negative.... just tap it in... took me ages to find the damn cables while installing my alarm...

User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:

Postby Garry » Wed Jun 25, 2008 4:00 pm

Yeah, it's on the passenger side. White plug mounted to the body up near the blower. I only remember 2 wires but my memory is pretty average these days.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven

silvermiata
Fast Driver
Posts: 202
Joined: Tue Jul 31, 2007 7:59 am
Vehicle: NB8A
Location: Sydney

Postby silvermiata » Wed Jun 25, 2008 4:44 pm

hmmm... gary i could be wrong as my short term is not very good either :roll: maybe it is 2 wires.. well just use a voltmeter to check :)

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Postby Regie » Wed Jun 25, 2008 6:18 pm

sweet as cheers.

the damn instructions said it was under the fuse box! doh!

thanks peoples! time to pull the glovebox out again
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Re:

Postby Benny » Fri Jun 27, 2008 1:50 pm

Regie wrote:sweet as cheers.

the damn instructions said it was under the fuse box! doh!

thanks peoples! time to pull the glovebox out again


You'll probably find the instructions are for LHD cars.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Re:

Postby Regie » Fri Jun 27, 2008 3:15 pm

Benny wrote:
Regie wrote:sweet as cheers.

the damn instructions said it was under the fuse box! doh!

thanks peoples! time to pull the glovebox out again


You'll probably find the instructions are for LHD cars.


hehe yep they sure are. oh well i have a good mental image of how the dash looks under the steering column now :)

they are installed and working and man there is a lot more light in the cabin now when the doors are opened. i recomend this kit to anyone! its tops!
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Re:

Postby sliq » Fri Jun 27, 2008 4:18 pm

Regie wrote:
Benny wrote:
Regie wrote:sweet as cheers.

the damn instructions said it was under the fuse box! doh!

thanks peoples! time to pull the glovebox out again


You'll probably find the instructions are for LHD cars.


hehe yep they sure are. oh well i have a good mental image of how the dash looks under the steering column now :)

they are installed and working and man there is a lot more light in the cabin now when the doors are opened. i recomend this kit to anyone! its tops!


can you wire them to light up when the parker lights are switched on?
i can't brain today.. i have the dumb..

User avatar
marcusus
Speed Racer
Posts: 2919
Joined: Thu Jul 13, 2006 12:07 am
Vehicle: NB8A

Re:

Postby marcusus » Mon Jun 30, 2008 10:57 pm

sliq wrote:can you wire them to light up when the parker lights are switched on?

I'd think you wouldn't want to do that since it'd mean that the interior lights would be always on if you're driving at night?

Nonetheless, I'm sure it's possible. Just a matter of figuring out where the ACC cable runs to and tapping to that.

silvermiata
Fast Driver
Posts: 202
Joined: Tue Jul 31, 2007 7:59 am
Vehicle: NB8A
Location: Sydney

Postby silvermiata » Tue Jul 01, 2008 5:42 pm

sliq you can wire them so they turn on when your parkers are on, just tap the + side into the wire behind the light dimmer switch (cant remember what colour it was i can find out for you.) and it should do the trick... good idea to put red leds under the dash for nigth driving..

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Re:

Postby sliq » Tue Jul 01, 2008 11:23 pm

silvermiata wrote:sliq you can wire them so they turn on when your parkers are on, just tap the + side into the wire behind the light dimmer switch (cant remember what colour it was i can find out for you.) and it should do the trick... good idea to put red leds under the dash for nigth driving..


silvermiata are u free this sunday? we can do my radiator and i can have a squizz at your interior led's 8)
i can't brain today.. i have the dumb..

fabiank

Help Interior Lighting Kit

Postby fabiank » Fri Aug 15, 2008 8:27 pm

I've been trying to work out how to do this for months, and stumbled across this topic. Is the wiring for the lights the same on a 2004 SE as well? I assume I will find the wiring under the glove box as well and not under the steering wheel?

Thanks heaps :-)

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Help Interior Lighting Kit

Postby Regie » Sat Aug 16, 2008 7:18 am

yeah man the wiring should be the same

once i found it, it was a 5 min job to wire it all up
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

fabiank

Help Interior Lighting Kit

Postby fabiank » Fri Aug 22, 2008 5:21 pm

Well that didn't go too well.... :frown:
Not only i now have no interior light, i have no radio and my engine warning light is on....DOH!!

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Help Interior Lighting Kit

Postby Mr Morlock » Fri Aug 22, 2008 6:37 pm

Check yr fuses. What did you do? You might have to reverse your process. The instructions should help.


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: Bing [Bot] and 130 guests