SE Intercooler - These OK???

Craig · Postby **Craig** » Thu May 22, 2008 7:27 pm

http://cgi.ebay.com.au/INTERCOOLER-710X ... dZViewItem

Boags · Postby **Boags** » Thu May 22, 2008 7:31 pm

Should have bought an SP... :oops:

Craig · Postby **Craig** » Thu May 22, 2008 7:32 pm

*SLAP*

MINX · Postby **MINX** » Thu May 22, 2008 7:52 pm

Sharp price - let me know how it goes. :?:

Boags · Postby **Boags** » Thu May 22, 2008 11:04 pm

I paid a little less than that for mine IIRC; around $120 posted... :?:

Same size and quality by the looks of it. Keep your eyes peeled.

Fatty · Postby **Fatty** » Fri May 23, 2008 12:30 am

Boags'MX5 wrote:I paid a little less than that for mine IIRC; around $120 posted...

yeah i think that was the justjap / cooling pro one that you bought. they have gone up , they about about $140 - $150 now i think.

PASHN8 · Postby **PASHN8** » Fri May 23, 2008 1:51 am

Too small Craigy!

THIS is what you want!

http://cgi.ebay.com.au/Front-Mount-Intercooler-560x180mmX65mm-Mini-INTEGRA-B16_W0QQitemZ180243893490QQihZ008QQcategoryZ130654QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247

I bought from him and he was excellent to deal with!

MINX · Postby **MINX** » Fri May 23, 2008 8:18 am

How much work to replace std SE cooler?
Will these fit straight in?
Do you need to remove front bumper?
Get new hoses/fittings?
What is the benefit for expense and labour (apart from appearance)?

Boags · Postby **Boags** » Fri May 23, 2008 9:57 am

MINX wrote:How much work to replace std SE cooler?
Will these fit straight in?
Do you need to remove front bumper?
Get new hoses/fittings?
What is the benefit for expense and labour (apart from appearance)?

Blackster (IIRC) did a good write up on replacing the standard cooler and the benifits of it.

It means you can have prolonged spirited driving (like a club run in QLD) without the intake temps getting too high. Great value for money IMO.

Boags

ampz · Postby **ampz** » Fri May 23, 2008 10:45 am

Need a hand Craig?

Postby **Okibi** » Fri May 23, 2008 10:50 am

I think CT also posted an SE intercooler upgrade too, might be worth a search.

blackster · Postby **blackster** » Fri May 23, 2008 10:58 am

MINX wrote:How much work to replace std SE cooler?
Will these fit straight in?
Do you need to remove front bumper?
Get new hoses/fittings?

Clicky here

Boags · Postby **Boags** » Sun May 25, 2008 12:01 am

CT has 2 for sale at the moment! Go for those.

Sean · Postby **Sean** » Sun May 25, 2008 4:43 am

Be wary of the ebay coolers mate, they are cheap for a reason. IIRC a few racers had temp problems worse than stock using these.

Nice for bling tho.

blackster · Postby **blackster** » Sun May 25, 2008 11:11 am

Sean wrote:Be wary of the ebay coolers mate, they are cheap for a reason. IIRC a few racers had temp problems worse than stock using these.

Nice for bling tho.

Are these the same racers who have machined holes in the bumper, running aftermarket radiator and IC, coolant re-route mod and oil coolers? If so, it sounds alot like a generic heating issue for over boosted tracked applications.

As far as the OEM SE interwarmer is concerned, its heat rejection and pressure is poor.