New stereo! Pioneer DEH-3000IB

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
redwards
Fast Driver
Posts: 244
Joined: Sat Feb 02, 2008 8:43 pm
Location: Melbourne, Victoria

New stereo! Pioneer DEH-3000IB

Postby redwards » Sun May 11, 2008 11:26 pm

Finally got around to replacing the stereo (which is free to a good home).

My requirements were simple: primarily black fascia, green lighting. Any additional tricks would be merely nifty bonuses.

So... I picked up a Pioneer DEH-3000IB for $250 - which included an iPod cable whatsit. Always loved the Pioneers. My first car had one for 7 years (the entire time I had it) and it only started skipping CD tracks near the end. So natural progression and all that.

Took a few hours to install - only because I was fussing around with working out precisely how I wanted to install it, stripping the old one out, soldering the wires and heat shrink binding (soooo much nicer than electrical tape).
(Although at the end of it all, there was one wire unaccounted for... Anyone know what the red and black one does? :oops:)

One of the nicest bits: the bezel is only about 2mm thick - so it sits quite neatly for those with 1st gen tombstones.

Photo time (sorry, mobile phone only :? )
Front on view:
Image

Off centre - you can see how far it sticks out (not much further than most detachable face decks)
Image

And when it's a little dark
Image

Initial thoughts:
The sound is pretty awesome. I'm running whatever speakers were in when I got the car (I haven't looked yet) - headrest speakers plus whatever's in the doors. 4\"s? Dunno. But I get good quality sound with little distortion at volumes far beyond that which I'd normally use. In fact the biggest sound issue was MP3s encoded at 128 or 192kbs (which means I'll need to re-encode everything at 320kps now!).

No buttons along the bottom edge to mash your fingers against if your hand slips while changing gears! My old deck would often end up on random, some AM station, on fast forward or only playing 15 secs of each song (apparently this last feature is useful??). No longer!

The iPod connection is good - you can fiddle with the iPod through the deck or switch it to the iPod itself.

It has a IP-BUS connector. Yeah, don't actually know what that is, but it means there's another place you can plug peripherals in - like a Bluetooth adaptor, USB mass storage device player or CD stacker - without losing the iPod.[/img]
Image
Former owner of a white 1994 NA8 Clubman

User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:

Postby jules » Mon May 12, 2008 10:26 am

That's as good an install as I've ever seen with the narrower fascia. Did you look at getting the wider one before installing?

Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

Postby wun911 » Mon May 12, 2008 11:38 am

nice install pioneeir do make nice HUs

I think the red and black wire. Is for dimming the HU when you dim the instrument/spedo lights.
every ounce counts

User avatar
redwards
Fast Driver
Posts: 244
Joined: Sat Feb 02, 2008 8:43 pm
Location: Melbourne, Victoria

Re:

Postby redwards » Mon May 12, 2008 12:49 pm

jules wrote:That's as good an install as I've ever seen with the narrower fascia.

Aww shucks :oops: I think the credit ought to go to Pioneer for making a nice thin bezel.

jules wrote:Did you look at getting the wider one before installing?

I saw the later gen tombstone from MX5 plus, then went 'bugger it'. I was even considering installing the HU behind the tombstone because the bezel is so nice and fine. But there's nothing to actually mount it to (without some substantial fabrication) and then the cubby hole (which I never use) would still sit proud.

wun911 wrote:I think the red and black wire. Is for dimming the HU when you dim the instrument/spedo lights.

That was my guess too - it wasn't wired to the old HU, and there wasn't another wire to pair it with.
Image
Former owner of a white 1994 NA8 Clubman

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Mon May 12, 2008 4:37 pm

holiday in cambodia!!

dead kennedys, great band.


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: Google [Bot] and 118 guests