Subwoofer Installs
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- Alex
- Racing Driver
- Posts: 1654
- Joined: Thu Jan 04, 2007 6:54 am
- Vehicle: NB8A
- Location: Sydney
Re:
PASHN8 wrote:I emailed FHRX in regards to if they would sell the same side mount fitout in pieces to interstate MX-5 owners for us to have fitted up ourselves, will report back!
I also emailed Karatan enclosures in NSW who make custom corner enclosures as to whether they would do a cheap run of sealed FG enclosures to suit NB MX-5 if we provided a donor car for the fitout.
how much are you willing to pay for a FG enclosure??
for those who don't know why I'm asking Clicky
Red NB8A - BD rollbar - Hardtop
- TieNN89
- Speed Racer
- Posts: 2012
- Joined: Mon Nov 26, 2007 8:27 pm
- Vehicle: NC
- Location: Brisbane
- Contact:
Re:
PASHN8 wrote:Aztien, where are you located?
Who in NSW would be willing to let the fabricator use their car for exact measurements to make these boxes? I would use my SE, but i'm in Melbourne
I'm in Brisbane or else i would let them use my car
they need the car to actually do the job inside it so they'd need it for a full day i'd assume
- Alex
- Racing Driver
- Posts: 1654
- Joined: Thu Jan 04, 2007 6:54 am
- Vehicle: NB8A
- Location: Sydney
Re:
AZNTieN wrote:PASHN8 wrote:Aztien, where are you located?
Who in NSW would be willing to let the fabricator use their car for exact measurements to make these boxes? I would use my SE, but i'm in Melbourne
I'm in Brisbane or else i would let them use my car
they need the car to actually do the job inside it so they'd need it for a full day i'd assume
maybe more, depends on how good they are
Red NB8A - BD rollbar - Hardtop
- PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
SM, what sort of money would you be happy with to create more of those?
The company in Sydney have confirmed they would need an NB MX-5 for a full day to take all the dimensions for the first box.
If we get 5 orders, they will do them for around $235 + postage, complete/carpeted with gold terminals, ready to go.
That is damn cheap for a custom FG enclosure!
The company in Sydney have confirmed they would need an NB MX-5 for a full day to take all the dimensions for the first box.
If we get 5 orders, they will do them for around $235 + postage, complete/carpeted with gold terminals, ready to go.
That is damn cheap for a custom FG enclosure!
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
- Alex
- Racing Driver
- Posts: 1654
- Joined: Thu Jan 04, 2007 6:54 am
- Vehicle: NB8A
- Location: Sydney
I don't really have the time I just thought you would be interested in knowing what it takes to make one and the cost of materials
although it would be easier to make it flat because you wouldn't need to go through the extra fibreglassing for the front face
some questions you should get answered before going ahead with the group buy
how is it anchored? (very important)
what size sub is it going to be made for? (also note that not all subs are the same size, different companies have different rulers it seems and are mounted different ways, 6/8 screws and some are flush mounted)
how many layers will they be using?
internal volume? (this matters alot as some subs will not be happy in a small sealed enclosure)
number of terminals? (2 or 4)
probably some more that I haven't thought of yet
and don't forget you need to mount the amp somewhere
but yes it's the best price I've seen for this type of enclosure (I looked at paying someone to do mine)
although it would be easier to make it flat because you wouldn't need to go through the extra fibreglassing for the front face
some questions you should get answered before going ahead with the group buy
how is it anchored? (very important)
what size sub is it going to be made for? (also note that not all subs are the same size, different companies have different rulers it seems and are mounted different ways, 6/8 screws and some are flush mounted)
how many layers will they be using?
internal volume? (this matters alot as some subs will not be happy in a small sealed enclosure)
number of terminals? (2 or 4)
probably some more that I haven't thought of yet
and don't forget you need to mount the amp somewhere
but yes it's the best price I've seen for this type of enclosure (I looked at paying someone to do mine)
Red NB8A - BD rollbar - Hardtop
- ducktape69
- Racing Driver
- Posts: 997
- Joined: Tue Dec 13, 2005 11:57 pm
- Vehicle: ND - 2 GT
- Location: Sydney....Westside
- muzzy66
- Fast Driver
- Posts: 116
- Joined: Tue Mar 18, 2008 11:38 pm
- Vehicle: ND - 2 GT
- Location: Sydney, Australia
Re:
SM wrote:I'm sure that focal 11" isn't 11"
Just to confirm for those who have doubts, the sub is from the Focal KX range.
This particular subwoofer line contains models ranging in size from 11" (smallest) to 18" (largest) - so it can't possible be smaller then 11".
Also i did see this car in person through various stages of the installation so I can definately confirm that it is indeed an 11"
- marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
-
- Fast Driver
- Posts: 192
- Joined: Thu Apr 13, 2006 9:58 am
- Vehicle: NB8B
- Location: Warrnambool, VIC
- Contact:
- Lucky_Luke
- Fast Driver
- Posts: 348
- Joined: Tue Mar 07, 2006 10:45 pm
- Vehicle: NC
- Location: Adelaide
- Contact:
- Benny
- Speed Racer
- Posts: 2607
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NB SP
- Location: Gorgeous Sydney
- Contact:
Check out my home page (click on the www at the bottom of this post), and you'll see my sub enclosure.
It is an 8\" Alpine sub, and to be frank with you, the MX-5 doesn't need anything bigger than a decent 8\".
As it is, the bass can really vibrate you quite a bit, but it doesn't have any buzzes that aren't supposed to be there.
The box is easily removeable by the removal of just the one screw, and looks so neat, that srutineers at race tracks haven't picked it out as being removable (although I do take it out at the track).
Sure you might be able to fit in a 12\" or even a 15\" sub, but you are just wanking if you do, as an 8\" is plenty.
If anyone wants to listen to my system (and I reckon it is really VERY good, even if I say so myself) let me know when you'll be around Sydney and we can hook up.
I've been an audiophile for over 35 years and I reckon my system sounds as good if not better than any other system I've heard in a car, including my Mercedes with the optional high-end Bose system.
It is an 8\" Alpine sub, and to be frank with you, the MX-5 doesn't need anything bigger than a decent 8\".
As it is, the bass can really vibrate you quite a bit, but it doesn't have any buzzes that aren't supposed to be there.
The box is easily removeable by the removal of just the one screw, and looks so neat, that srutineers at race tracks haven't picked it out as being removable (although I do take it out at the track).
Sure you might be able to fit in a 12\" or even a 15\" sub, but you are just wanking if you do, as an 8\" is plenty.
If anyone wants to listen to my system (and I reckon it is really VERY good, even if I say so myself) let me know when you'll be around Sydney and we can hook up.
I've been an audiophile for over 35 years and I reckon my system sounds as good if not better than any other system I've heard in a car, including my Mercedes with the optional high-end Bose system.
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team
- PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
Luke, that looks pretty neat! What happens when the softop is folded down? Especially those who have glass rear windows?
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
- Alex
- Racing Driver
- Posts: 1654
- Joined: Thu Jan 04, 2007 6:54 am
- Vehicle: NB8A
- Location: Sydney
Re:
PASHN8 wrote:Luke, that looks pretty neat! What happens when the softop is folded down? Especially those who have glass rear windows?
Lucky_Luke wrote:I've got a hard top and my car is rarely dríven so i removed my soft top and stored it.
Red NB8A - BD rollbar - Hardtop
- PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
Ok, car goes in to the shop for boot install in 2 weeks. Will post up pics once completed.
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 269 guests