Where to get Caliper rebuild kits

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
ampz
Racing Driver
Posts: 814
Joined: Fri Sep 23, 2005 9:56 pm
Vehicle: NA6 - Turbo
Location: siiiidaneeey
Contact:

Where to get Caliper rebuild kits

Postby ampz » Mon Mar 17, 2008 1:38 pm

Anyone know where to get them?
I'm still waiting on Mazda Rockdale to call me back with a price on them.

I'm particularly after the Piston seals and pivot pin boots.

Cheers
Nuno
Huh?

User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:

Postby Garry » Mon Mar 17, 2008 2:18 pm

MX5parts UK sells them. I got a new genuine caliper piston from them a few years ago for my NA. Mazda Aus didn't even sell the part. They wanted me to buy a whole new caliper assembly. :evil:
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven

User avatar
ampz
Racing Driver
Posts: 814
Joined: Fri Sep 23, 2005 9:56 pm
Vehicle: NA6 - Turbo
Location: siiiidaneeey
Contact:

Postby ampz » Mon Mar 17, 2008 3:45 pm

Thanks Garry, that's what i thought (hence why they haven't returned my call).

With the current exchange rates, it will be cheaper through the States no?

Miatamania
Huh?

phaedo
Driver
Posts: 62
Joined: Sun Jan 28, 2007 1:40 am
Vehicle: ND - 2 GT
Location: Northern Beaches

Postby phaedo » Mon Mar 17, 2008 4:39 pm

My suggestion is don't have Mazda do the work, I had one rear calliper seized, all in all to get the brakes fixed, new pads, machining, rebuilding callipers, I ended up with a $1,000 bill. Was not happy.
Start OT rant...
And they called (after a week) to say it is finally done, but now we can't get it started. You need a new battery. Told them it was an OEM one bought from them 3 weeks earlier, they sent it out to an auto electrician to have them look at it, 6 hours later they say it is the battery. It is dead. This was at 2pm. They needed a receipt from me so they could replace it under warranty. 2 minutes later I found it, called them back to say I had it. An hour later, went in. This is now 3pm. Amount of time needed to pull the old battery out and put new one in? They called me at 2pm the next day when it was finally ready - and it was still another 20 minutes to get it as it was sitting to be washed - which did not even get done as I was late for work.
Oh, and to also point out - although I needed to get the brakes done, I had gone in because the car wouldn't start. A week after they had the car they still had not investigated the reason I dropped it off.
/End O/T rant/

User avatar
ampz
Racing Driver
Posts: 814
Joined: Fri Sep 23, 2005 9:56 pm
Vehicle: NA6 - Turbo
Location: siiiidaneeey
Contact:

Postby ampz » Tue Mar 18, 2008 11:44 pm

:shock:

Sorry to hear bud.

I am pretty sure i know who will be doing the work (me) 8)

At this stage it looks like delivry included will work out a little cheaper from miatamania than mx5partsuk for the service kits and pads.

Cheers
Nuno
Huh?

User avatar
Grumpy
Fast Driver
Posts: 218
Joined: Tue Feb 13, 2007 9:17 pm
Vehicle: NC
Location: Melbourne

Postby Grumpy » Tue Mar 25, 2008 8:22 pm

I got my repair kit for my NA from a local shop in Melbourne(seals only). Can't remember the exact figure but somewhere around $30 for 2 sets. Still have 1 in the toolbox. They supplied Green Stuff pads as well.
Sadly MX5 less for a while.
Rebuilding an 89 Honda CRX

User avatar
bigdog
King of the kennel
Posts: 2233
Joined: Wed May 25, 2005 3:07 pm
Vehicle: NB SP
Location: Blue Mountains
Contact:

Postby bigdog » Tue Mar 25, 2008 8:53 pm

Ask your local brake shop first Nuno. Seal kits should be readily available from Better Brakes etc, and are not normally expensive. Never asked about MX-5 kits before, but it only costs a phone call. I have just fitted Greenstuff all round and am very pleased so far - significant improvement in feel and stopping power. :D
Image
Marvin - '02 Silver SP - BD, PSS9, Guru, Build #62 Cardomain

User avatar
ampz
Racing Driver
Posts: 814
Joined: Fri Sep 23, 2005 9:56 pm
Vehicle: NA6 - Turbo
Location: siiiidaneeey
Contact:

Postby ampz » Tue Mar 25, 2008 9:32 pm

I have a local (Botany) that supplies me my clutch and brake bits for the other cars that have come past my life....

I'll call him tomorrow, it has just been a bit busy of late.

My guess is they would be very similar to the Astina calipers as the pads looki identical.

Thanks for the replies.
Nuno
Huh?


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 271 guests