brake pedal height adjustment

[Steampunk]

I want to move the pedal closer, and I tried doing it the \"normal\" way from the interior by:
- undo brake-light switch and wind it out
- remove pin securing pushrod bracket onto brake pedal

but the problem is the bracket where the brake-light switch sits will only allow the brake pedal to move 3mm closer to the driver.

You will understand what I mean if you pop your head under the dash.

So does anyone know of a trick to move the brake pedal closer?

[JBT]

An alternative might be to fit a thicker foot pad (if such an animal exists) to the pedal.

[manga_blue]

What matters is the relationship between brake and accelerator pedals. The accelerator pedal is bendable. Not wise to bend the brake one.

[Steampunk]

Yeah I thought of that too JBT.
It's only for the benefit of heel-toeing.
I'll have to figure something out to attach to the pedal for next track day.

[Sasso]

Why don't you lower the accelerator pedal instead?

[marcusus]

It's only for the benefit of heel-toeing.

Heel toe or heel toe double de clutch?

[Tezzax5]

Or just get a set of heels like PRINCE......only teasing big fella

[Steampunk]

Why don't you lower the accelerator pedal instead?

Thought about that too.
I'll pop me head under the dash again.
There is a large adjustable bolt that acts as a stopper, if I wind this down:
- accel pedal sits farther away
- accel cable gets tauter
- adjusting accel cable slack is easy

only problem will be the amount of pedal movement and throttle butterfly opening at full open throttle.

I'll have a fiddle and see how it goes. Thanks.

And Tez, I have a headache so no glib comebacks for you tonight except a stern, "No"