dodgy turtle paced electric windows

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

tjcool
Fast Driver
Posts: 111
Joined: Mon Sep 25, 2006 3:10 pm
Vehicle: ND - 2 GT
Location: Blue Mountains NSW

dodgy turtle paced electric windows

Postby tjcool » Fri Feb 15, 2008 3:24 pm

howdy y'all
has anyone had any experience with replacing power mirror motors on the NA6 ?
I have cleaned and wire brushed the copper contacts under the buttons in the centre console to give it a better contact (which made a big difference worht trying if you are having similar issues) but now a while later the passenger side window especially is so slow and some days gets stuck like 3/4 of the way down.

I remember reading somewhere on here i think about people lubing the window itself with silicone or some sh*t ?
is this worth giving a try or should i just get a new 2nd hand motor ?

any ideas or expert advice would be appreciated thanks
leave the gun.... take the canoli's

Nickers
Driver
Posts: 31
Joined: Thu Nov 02, 2006 6:30 pm
Vehicle: NA6
Location: Ballarat
Contact:

Postby Nickers » Fri Feb 15, 2008 3:53 pm

Your window motors might just be overworking...

The rubbers along the outside of the door, between the glass and doorskin itself on mine have hardened with age. This puts pressure on the glass as it slides up and down (more down than up due to the design of the rubber), slowing the glass down quite a bit. Leave the car in the sun, let these rubbers heat up and become a little more flexible, then try the window again. If it is quicker, your rubbers are shagged.

Anyone know if there are replacements available?
1990 Red NA6

User avatar
sabretooth
Speed Racer
Posts: 2119
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NA8 - Turbo

Postby sabretooth » Fri Feb 15, 2008 6:20 pm

I found that removing, cleaning completely and lubricating the rails/guides with silicone spray did the trick nicely.

User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:

Postby TieNN89 » Fri Feb 15, 2008 7:05 pm

i got some CRC Tac 2 from Repco sprayed it on the window rails and it worked good

when I got the car the windows went up very slow compared to now

User avatar
timk
Racing Driver
Posts: 1928
Joined: Fri Dec 31, 2004 3:16 pm
Vehicle: NC

Postby timk » Fri Feb 15, 2008 8:30 pm

You could get an NC, their windows wind so quickly! :cry:

User avatar
ma64rk
Fast Driver
Posts: 115
Joined: Thu Mar 09, 2006 9:44 pm
Vehicle: ND - 2 GT
Location: Melbourne

Postby ma64rk » Wed Feb 20, 2008 1:22 pm

\"remember reading somewhere on here i think about people lubing the window itself with silicone or some sh*t ?\"
I'm not sure about using sh1t :P , but I have tried silicone spray and it is a simple fix. :)
Take the road less traveled...
Silver 01 w/hardtop & stylebars...

tjcool
Fast Driver
Posts: 111
Joined: Mon Sep 25, 2006 3:10 pm
Vehicle: ND - 2 GT
Location: Blue Mountains NSW

Postby tjcool » Thu Feb 21, 2008 8:44 am

thanks all ill give the silicone a go
leave the gun.... take the canoli's


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 117 guests