Which way to go, 6X8 or 6.5 inch splits?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- Brotherontherun
- Learner Driver
- Posts: 16
- Joined: Fri May 27, 2005 11:30 pm
- Vehicle: ND - 2 GT
- Location: Always on the run for breaking things...
Which way to go, 6X8 or 6.5 inch splits?
Hi guys,
It's been a while since I logged on, but need some advice, I while ago I read a posting of someone who mentioned having 6X8 installed in a NB and couldn't find it.
Over Xmas some low life stole my system whilst I was away on holidays and the car was stored... It's another story... But they slashed the roof and took my JVC el kamelion cd player, mp3 12 stack and cliff design splits... Not happy. Fortunately not the amp sitting under the seat...
So now I am planning my next system and need to know whether MB Quart RVF268's would fit? Has anyone fitted any 6X8's in their front doors??
I have a preference to go down the path of 6X8's so any advice would be appreciated. I had the system from my last car and would happily go back to cliff designs but you really need a sub to have them at thier best as they have such a clean top end and lack meaty mid bass...
Cheers
Brad
It's been a while since I logged on, but need some advice, I while ago I read a posting of someone who mentioned having 6X8 installed in a NB and couldn't find it.
Over Xmas some low life stole my system whilst I was away on holidays and the car was stored... It's another story... But they slashed the roof and took my JVC el kamelion cd player, mp3 12 stack and cliff design splits... Not happy. Fortunately not the amp sitting under the seat...
So now I am planning my next system and need to know whether MB Quart RVF268's would fit? Has anyone fitted any 6X8's in their front doors??
I have a preference to go down the path of 6X8's so any advice would be appreciated. I had the system from my last car and would happily go back to cliff designs but you really need a sub to have them at thier best as they have such a clean top end and lack meaty mid bass...
Cheers
Brad
98 Twilight Blue. Body Kit & 16's
- Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
- Brad
- Racing Driver
- Posts: 613
- Joined: Fri Aug 29, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Brisbane
- Contact:
A good set of 6\" splits will be better as the market for 6x8 (6x9?) is limited to those who simply want volume over quality. Forget 3 ways with the little tweeters, these do sweet FA. Go the MB Quarts so long as they fit.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
- Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
- Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
- Brotherontherun
- Learner Driver
- Posts: 16
- Joined: Fri May 27, 2005 11:30 pm
- Vehicle: ND - 2 GT
- Location: Always on the run for breaking things...
Thanks Guys for your advice - I'm really missing some tunes... I can't wait to get my hands on these puppies!
http://www.mbquart.com/en/produkte/car/ ... nr=rvf_268
Obiki - thanks for the thread link - I read that with interest... It's a shame I can't find anything on an 8 inch split... How do they sound?
Cheers,
Brad
http://www.mbquart.com/en/produkte/car/ ... nr=rvf_268
Obiki - thanks for the thread link - I read that with interest... It's a shame I can't find anything on an 8 inch split... How do they sound?
Cheers,
Brad
98 Twilight Blue. Body Kit & 16's
- Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
- Brad
- Racing Driver
- Posts: 613
- Joined: Fri Aug 29, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Brisbane
- Contact:
IMHO MB Quarts are the best all round speakers out there.
Rather than spending time fabricating a new mount, cutting door panels and basically shoe-horning 8\" drivers in, spend the time on the install of the 6's, with sound deadening the sealing up the door cavity as much as possible. You'll got twice as better sound this way, and the woofer will extend lower and with more omph then an 8\" in a standard door.
Rather than spending time fabricating a new mount, cutting door panels and basically shoe-horning 8\" drivers in, spend the time on the install of the 6's, with sound deadening the sealing up the door cavity as much as possible. You'll got twice as better sound this way, and the woofer will extend lower and with more omph then an 8\" in a standard door.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
- Garry
- Speed Racer
- Posts: 3481
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: NB SP
- Location: God's Country
- Contact:
There's much more fabrication involved fitting a 6\" speaker into an NB than there is to fit an 8\" speaker (ie, non to fit an 8\"). Both sets of 8\" speakers I have fitted to my car fitted the door cutout perfectly, even the screws lined up with the existing mounting holes in the door.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
- Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re:
Garry wrote:There's much more fabrication involved fitting a 6" speaker into an NB than there is to fit an 8" speaker (ie, non to fit an 8"). Both sets of 8" speakers I have fitted to my car fitted the door cutout perfectly, even the screws lined up with the existing mounting holes in the door.
Yup I agree. I made a thin MDF baffle because the panel on the door wasn't flat and I wanted the speaker to be more air tight.
If you had access to a car like this, would you take it back right away? Neither would I.
- Brad
- Racing Driver
- Posts: 613
- Joined: Fri Aug 29, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Brisbane
- Contact:
- Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
-
- Driver
- Posts: 67
- Joined: Sun Oct 23, 2005 2:55 am
- Vehicle: ND - 2 GT
- Location: Sydney
Dynaudio make a 7\" split and DLS make an 8\" split. Both have excellent reputations for SQ.
http://www.dlsaustralia.com.au/english/index.htm
See the Iridium and more expensive nobelium series
http://www.dynaudio.com /url]
242 series
http://www.dlsaustralia.com.au/english/index.htm
See the Iridium and more expensive nobelium series
http://www.dynaudio.com /url]
242 series
NB SE
- bigdog
- King of the kennel
- Posts: 2233
- Joined: Wed May 25, 2005 3:07 pm
- Vehicle: NB SP
- Location: Blue Mountains
- Contact:
I picked up a pair of VDO Dayton 8 inch 3 ways 90W RMS jobbies at Repco - they were clearing stock and I scored these for *cough* dollars Haven't got to fitting them yet, but for the money they have to be good!
Edit - just had a good look at them and found that they are made by Phillips for VDO. If anyone is interested in these I'd head to your local Repco and see if there are any left. 8 inch car speakers are becoming very hard to find.
Edit - just had a good look at them and found that they are made by Phillips for VDO. If anyone is interested in these I'd head to your local Repco and see if there are any left. 8 inch car speakers are becoming very hard to find.
Last edited by bigdog on Fri Feb 08, 2008 9:42 pm, edited 1 time in total.
-
- Speed Racer
- Posts: 3175
- Joined: Fri Feb 03, 2006 10:39 am
- Vehicle: NA6
- Location: Melbourne
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 59 guests