Best Bang For You Buck All-Round Brake Pads???

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

wks5

Best Bang For You Buck All-Round Brake Pads???

Postby wks5 » Wed Jan 23, 2008 11:53 am

hey guys,

Just after your advice for the Best Bang For You Buck All-Round Brake Pads for an NA6 and why?

Looking to do the odd-track day and motorkhana race but 75% of time for daily driving both wet and dry. Don't want to spend ridiculous amounts of money but want a bit of quality.

I'm finding that my current pads (don't know what i'm running) lack bite/feel but are pretty fade resistant if not dríven too hard for long periods.

thanks

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Postby Okibi » Wed Jan 23, 2008 12:22 pm

(I haven't tried Hawk or EBC etc. )
I use Bendix Ultimate, they seem a great all round pad for our naturally aspirated NB.

They make a heap of brake dust but I put up with that given how well the pads perform.
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
PT
Racing Driver
Posts: 1188
Joined: Sat May 21, 2005 7:11 pm
Vehicle: NB8B
Location: Brisbane
Contact:

Postby PT » Wed Jan 23, 2008 12:32 pm

Another vote for Bendix Ultimate.
2001 Mazda MX-5 NB8B- http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=61506

Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Wed Jan 23, 2008 12:32 pm

I found OEM pads on the NA8 we had and the NC we currently have were/are just great for road and track days.
Image

User avatar
PT
Racing Driver
Posts: 1188
Joined: Sat May 21, 2005 7:11 pm
Vehicle: NB8B
Location: Brisbane
Contact:

Postby PT » Wed Jan 23, 2008 12:50 pm

Track days yes... but what about when 'mountain dríven?'
2001 Mazda MX-5 NB8B- http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=61506

Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Wed Jan 23, 2008 2:18 pm

\"Mountain dríven\" is muuuuch easier than track days. :D
Image

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Wed Jan 23, 2008 4:56 pm

yes the bendix pads are good, but i agree with jbt it is worth checking out the oem pads as well, they are a good all purpose pad and not as dusty as the bendix.

User avatar
fastfreddygassit
Waitin' for a mate
Posts: 1773
Joined: Sat Jun 25, 2005 8:00 pm
Vehicle: NB SE
Location: Waitin' for a mate in Melbourne somewhere
Contact:

Re:

Postby fastfreddygassit » Wed Jan 23, 2008 6:28 pm

Fatty wrote:yes the bendix pads are good, but i agree with jbt it is worth checking out the oem pads as well, they are a good all purpose pad and not as dusty as the bendix.

evidently they perform much better when orientated the correct way :mrgreen:

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Wed Jan 23, 2008 6:52 pm

:oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops:



:mrgreen:

Juffa
Racing Driver
Posts: 1751
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Bayside - Melbourne
Contact:

Re:

Postby Juffa » Wed Jan 23, 2008 8:26 pm

Fatty wrote::oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops:



:mrgreen:


Hey I believe that should be my response :shock:
Former owner of Mailbu Stacey, Smurfette and Tweety.

Juffa
Racing Driver
Posts: 1751
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Bayside - Melbourne
Contact:

Postby Juffa » Wed Jan 23, 2008 8:32 pm

As part of the upgrade to a turbo I also installed NA8 brakes on my NA6. I had the disks machined and fitted OEM brake pads all around. I never really liked them. When I bought the bigger brakes I was given two sets of used pads OEM and some higher spec ones. I recently fitted the higher spec ones, and think they are great. I have only used them on the road and they have much better stopping power than the OEM pads. I'm pretty sure the previous owner used them on track. There is not a lot of meat left and if I could work out what they are I would like to get them again.
Not much help to this thread until I can find out they are.

J
Former owner of Mailbu Stacey, Smurfette and Tweety.

User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Postby StanTheMan » Wed Jan 23, 2008 8:42 pm

I have OEM NB8A pads in the front. Absolutely love them.
They may be $300 But i guess its like getting a decent tyre.

worth while in my book.
Satans Ride called F33nix the resurrected NA6

Slugoid

Postby Slugoid » Wed Jan 23, 2008 11:27 pm

Hawk HP Plus!

Some may disagree with me, but for the price and performance, it's hard to beat. I remember getting a set of fronts for my NA6 for under $120 and it's still going strong after 2-3 track days and countless mountain drives.

The only thing I have against these pads is dust, a little bit squeaky, eat into the rotors faster than OEM pads and need a bit of heat for them to work flawlessly. There are a lot of shortcomings, but then when you see how well they stop, you'll forget all about it :D

User avatar
meanmx
Racing Driver
Posts: 1493
Joined: Mon Aug 14, 2006 11:41 pm
Vehicle: NB8B
Location: Point Cook, Melbourne

Postby meanmx » Thu Jan 24, 2008 2:07 am

I had NB8B original pads in and now have EBC Red stuff on the front and EBC Green stuff on the back. Have found them to be alot better.

Ben
2014 VW Mk7 Golf R
2001 Black NB8B viewtopic.php?f=57&t=58136
1986 Mazda Luce Royal Classic (13BT Mazda 929)

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Thu Jan 24, 2008 7:50 am

I can't believe I'm reading that people fit brake pads that work when they are \"warmed up\". :shock: I want mine to work 100% from the time my car first moves until it is parked for the night. Oddly enough, the OEM pads do that. 8)
Image


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 351 guests