Best Bang For You Buck All-Round Brake Pads???
Moderators: timk, Stu, zombie, Andrew, -alex, miata
Best Bang For You Buck All-Round Brake Pads???
hey guys,
Just after your advice for the Best Bang For You Buck All-Round Brake Pads for an NA6 and why?
Looking to do the odd-track day and motorkhana race but 75% of time for daily driving both wet and dry. Don't want to spend ridiculous amounts of money but want a bit of quality.
I'm finding that my current pads (don't know what i'm running) lack bite/feel but are pretty fade resistant if not dríven too hard for long periods.
thanks
Just after your advice for the Best Bang For You Buck All-Round Brake Pads for an NA6 and why?
Looking to do the odd-track day and motorkhana race but 75% of time for daily driving both wet and dry. Don't want to spend ridiculous amounts of money but want a bit of quality.
I'm finding that my current pads (don't know what i'm running) lack bite/feel but are pretty fade resistant if not dríven too hard for long periods.
thanks
- Okibi
- Speed Racer
- Posts: 10901
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
- PT
- Racing Driver
- Posts: 1188
- Joined: Sat May 21, 2005 7:11 pm
- Vehicle: NB8B
- Location: Brisbane
- Contact:
Another vote for Bendix Ultimate.
2001 Mazda MX-5 NB8B- http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=61506
Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6
Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6
- PT
- Racing Driver
- Posts: 1188
- Joined: Sat May 21, 2005 7:11 pm
- Vehicle: NB8B
- Location: Brisbane
- Contact:
Track days yes... but what about when 'mountain dríven?'
2001 Mazda MX-5 NB8B- http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=61506
Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6
Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6
- fastfreddygassit
- Waitin' for a mate
- Posts: 1773
- Joined: Sat Jun 25, 2005 8:00 pm
- Vehicle: NB SE
- Location: Waitin' for a mate in Melbourne somewhere
- Contact:
Re:
Fatty wrote:yes the bendix pads are good, but i agree with jbt it is worth checking out the oem pads as well, they are a good all purpose pad and not as dusty as the bendix.
evidently they perform much better when orientated the correct way
-
- Racing Driver
- Posts: 1751
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Bayside - Melbourne
- Contact:
As part of the upgrade to a turbo I also installed NA8 brakes on my NA6. I had the disks machined and fitted OEM brake pads all around. I never really liked them. When I bought the bigger brakes I was given two sets of used pads OEM and some higher spec ones. I recently fitted the higher spec ones, and think they are great. I have only used them on the road and they have much better stopping power than the OEM pads. I'm pretty sure the previous owner used them on track. There is not a lot of meat left and if I could work out what they are I would like to get them again.
Not much help to this thread until I can find out they are.
J
Not much help to this thread until I can find out they are.
J
Former owner of Mailbu Stacey, Smurfette and Tweety.
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Hawk HP Plus!
Some may disagree with me, but for the price and performance, it's hard to beat. I remember getting a set of fronts for my NA6 for under $120 and it's still going strong after 2-3 track days and countless mountain drives.
The only thing I have against these pads is dust, a little bit squeaky, eat into the rotors faster than OEM pads and need a bit of heat for them to work flawlessly. There are a lot of shortcomings, but then when you see how well they stop, you'll forget all about it
Some may disagree with me, but for the price and performance, it's hard to beat. I remember getting a set of fronts for my NA6 for under $120 and it's still going strong after 2-3 track days and countless mountain drives.
The only thing I have against these pads is dust, a little bit squeaky, eat into the rotors faster than OEM pads and need a bit of heat for them to work flawlessly. There are a lot of shortcomings, but then when you see how well they stop, you'll forget all about it
- meanmx
- Racing Driver
- Posts: 1493
- Joined: Mon Aug 14, 2006 11:41 pm
- Vehicle: NB8B
- Location: Point Cook, Melbourne
I had NB8B original pads in and now have EBC Red stuff on the front and EBC Green stuff on the back. Have found them to be alot better.
Ben
Ben
2014 VW Mk7 Golf R
2001 Black NB8B viewtopic.php?f=57&t=58136
1986 Mazda Luce Royal Classic (13BT Mazda 929)
2001 Black NB8B viewtopic.php?f=57&t=58136
1986 Mazda Luce Royal Classic (13BT Mazda 929)
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 346 guests