14\" Street Tyres

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
corners
Racing Driver
Posts: 1127
Joined: Mon Aug 20, 2007 1:33 pm
Vehicle: ND - Supercharged
Location: Brisbane, QLD

14\" Street Tyres

Postby corners » Tue Jan 08, 2008 9:40 am

Well After reading many topics on all the choices and speaking to tyre suppliers today I am getting fitted some BF Goodrich GForce Sports on my mx.

I well let you know how they go, a friend works at the V8 RaceCar experience at Willowbank, QLD and he said they use the BFGoodrich when its wet and they are great in the wet.
They are also said to be made by Michelin.
Link:
http://www.bfgoodrich.com.au/index.php? ... nger&id=29

I would have gone with C Drives except i have heard they are made in another country now and are not as good? Can anyone clarify?

User avatar
Steampunk
Speed Racer
Posts: 4670
Joined: Wed Oct 10, 2007 9:16 am
Vehicle: NA6
Location: Southside of Breeze-bane

Re: 14\" Street Tyres

Postby Steampunk » Tue Jan 08, 2008 2:08 pm

jcs86 wrote:I would have gone with C Drives except i have heard they are made in another country now and are not as good? Can anyone clarify?


Saboteur ... ?
Image

User avatar
corners
Racing Driver
Posts: 1127
Joined: Mon Aug 20, 2007 1:33 pm
Vehicle: ND - Supercharged
Location: Brisbane, QLD

Postby corners » Tue Jan 08, 2008 7:51 pm

Well it was raining this arvo when i picked up the car and also got some bad news.
The locking nuts for wheel alignment are all ceased/rusty. They have sprayed some stuff to try and free it up and the car goes back friday.

From my experience so far they are a great tyre in the wet.

User avatar
PhilM
Fast Driver
Posts: 295
Joined: Fri Jul 27, 2007 9:55 pm
Vehicle: NA6
Location: Lake Macquarie

Postby PhilM » Tue Jan 08, 2008 9:56 pm

I put on some C Drives for my 1st track day last year - have now done 2 track days - I find they are pretty slippery when hot. They dont seem to have enough rubber on the out side edge, probablly good in the weet.
I run them at 36psi and will probably try them at a higher pressure on Feb 17.
I will be looking for something else when they are worn out.

Phil
Rosso Corsa Red NA V Special

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re:

Postby Charlie Brown » Wed Jan 09, 2008 8:45 am

PhilM wrote:I put on some C Drives for my 1st track day last year - have now done 2 track days - I find they are pretty slippery when hot. They dont seem to have enough rubber on the out side edge, probablly good in the weet.
I run them at 36psi and will probably try them at a higher pressure on Feb 17.
I will be looking for something else when they are worn out.

Phil


You may find they go off even quicker if you run a higher pressure.
When I ran the Michelin Precedas, once the hot pressure reached 41psi the performance fell away.

I would think that the C Drives would go off quicker than the Precedas as they have a smaller block size and will squirm more and therefore heat up quicker.

Monitor the pressures as soon as you come off the track (everytime) and then check your lap times. If you find that lap 2 is quicker than lap 4, even though you felt you drove better on lap 4, I can guarantee that (besides the tyres over heating) you will find the pressure is too high and you are running on the centre strip of the tread rather than the full width.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

GP
Racing Driver
Posts: 1025
Joined: Tue Nov 21, 2006 10:42 am
Vehicle: ND - 2 GT
Location: Brisbane

Postby GP » Wed Jan 09, 2008 12:00 pm

I run them at 36psi

:shock: How come such high pressures?
Graham

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re:

Postby Charlie Brown » Wed Jan 09, 2008 3:41 pm

GP wrote:
I run them at 36psi

:shock: How come such high pressures?


He's (we're) talking track pressures. for the road run Mazda's recommended pressure (29psi cold) or maybe a pound more.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

GP
Racing Driver
Posts: 1025
Joined: Tue Nov 21, 2006 10:42 am
Vehicle: ND - 2 GT
Location: Brisbane

Postby GP » Wed Jan 09, 2008 4:06 pm

That's strange, With bikes you usually drop the pressures for the track :?
Graham


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 156 guests