Clubman badge (prototype page 8)

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Locked
User avatar
Tezzax5
Racing Driver
Posts: 908
Joined: Mon Jun 11, 2007 12:00 pm
Vehicle: NB SP

Postby Tezzax5 » Thu Nov 29, 2007 11:29 am

HELP I got an email from andrew re-: clubman badge

He needs a couple more pics but i can't get a good enough image..

Anybody in brissie have a digitial camera that can do macro?

Badge has reflective surface so also need to be able to turn AF off

Thanks in advance

Terry S
Top
User avatar
Tezzax5
Racing Driver
Posts: 908
Joined: Mon Jun 11, 2007 12:00 pm
Vehicle: NB SP

Postby Tezzax5 » Thu Nov 29, 2007 11:35 am

Just rang Mazda


Computer says Obsolete not replaced

Better look after your badges....... :cry:
Top
User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Re:

Postby Andrew » Thu Nov 29, 2007 11:39 am

Tezzax5 wrote:He needs a couple more pics but i can't get a good enough image..


The firs pic was fine, just do the same but from a couple of different angles so the reflections are different 8)
Top
User avatar
Tezzax5
Racing Driver
Posts: 908
Joined: Mon Jun 11, 2007 12:00 pm
Vehicle: NB SP

Postby Tezzax5 » Thu Nov 29, 2007 11:49 am

Just charging up another camera...see if i can get a better result..
Top
User avatar
Tezzax5
Racing Driver
Posts: 908
Joined: Mon Jun 11, 2007 12:00 pm
Vehicle: NB SP

Postby Tezzax5 » Thu Nov 29, 2007 1:24 pm

pics sent....sorry for the pooeey quality... :oops: :cry:
Top
Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:
Contact Adam_NAclubman

Postby Adam_NAclubman » Sun Dec 02, 2007 12:16 am

Would it help if I were to get FoxForceFive to post my badge to you? Would it be easier to work off that? The bloke that he had lined up to make some ended up being way more expensive than we had expected
Top
User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Postby Andrew » Sun Dec 02, 2007 10:33 pm

Sorry guys, ive been interstat for a couple of days with little access to the net.

How does this look -

Image
Top
User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Postby green_comet » Mon Dec 03, 2007 11:44 am

Looks pretty spot on Andrew.. :D
Top
User avatar
Alfadog
Fast Driver
Posts: 304
Joined: Mon May 21, 2007 8:55 am
Vehicle: NB SP
Location: Melbourne, Australia

Postby Alfadog » Mon Dec 03, 2007 6:18 pm

Looks great now!

Being a nit-picker......

- Top left of flag isn't quite round enough
- Angle of the underline at the left is a bit too steep
- The bottom right of the white space in the middle of the \"C\" has a kink, but should be smoothed out a bit.

I dunno how it will be produced but the flag might not come out as planned...

Please don't take my comments the wrong way. You've done a stunning job :) Just trying to help out.
Image
Top
User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:
Contact Brad

Postby Brad » Mon Dec 03, 2007 7:50 pm

I can see the value o Clubmans on the decline with a badge as convincing as this getting around on non-Clubbies :cry:
:lol:
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image
Top
silverback2002

clubman sticker

Postby silverback2002 » Mon Dec 03, 2007 8:06 pm

I think that looks 100 % perfect.

How will it be printed in the bubble look like the original.


What is the expected cost per badge.

Lets get it done my clubman feels naked without it
Top
User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Re:

Postby Andrew » Mon Dec 03, 2007 8:19 pm

Brad wrote:I can see the value o Clubmans on the decline with a badge as convincing as this getting around on non-Clubbies :cry:
:lol:


Any ideas as to how to prevent that from happening :?:

Will send it off to the printer tomorrow 8)
Top
User avatar
Tezzax5
Racing Driver
Posts: 908
Joined: Mon Jun 11, 2007 12:00 pm
Vehicle: NB SP

Postby Tezzax5 » Mon Dec 03, 2007 9:25 pm

To purchase stickers a pic of the door jam stating bilsteins fitted....must be provided..

Or maybe leave one of the checks on the flag filled to state this is a replica flag...

don't flame me just a few ideas to get the ball rolling... :?
Top
Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Mon Dec 03, 2007 9:34 pm

actually, speaking of the sticker in the door - andrew is there any chance you can get these made up as well ? ? i guess you'll just need to get a picture of it from someone?

any volunteers???

i already have the torsen fitted, and a set of bilsteins in the shed, so.....
Top
User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Re:

Postby Andrew » Mon Dec 03, 2007 9:37 pm

Fatty wrote:actually, speaking of the sticker in the door - andrew is there any chance you can get these made up as well ? ? i guess you'll just need to get a picture of it from someone?


I'd need to see one (assume it would be the same as mine just with different info), the design would be easy and the printing shouldn't be all that hard or expensive.

Will finish this one first.
Top
Locked

Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 127 guests