Gimme some lip...

Captain Spank · Postby **Captain Spank** » Fri Nov 30, 2007 5:39 pm

Ok not lip in the verbal sense. But more so advice on how to install one.

I recently got my hands on a new lip and on retro fitting I noticed it's not a simple bolt on procedure as the lip doesn't have any holes drilled in. Now as much as I don't mine drilling holes into the lip. Does this mean I'll have to drill holes into the factory front spoiler?

Here's a few pics of the lip I'm talking about just sitting on my rig.

Quality is kinda poor as I took these on my pda...lost my camera cable again.

Any idea on how to fit it would be great.

CS

Fatty · Postby **Fatty** » Fri Nov 30, 2007 6:49 pm

i'd be cutting that bit off that blocks half the mouth... it could lead to overheating.

i'd say yes, you'll need to drill some holes.

Captain Spank · Postby **Captain Spank** » Fri Nov 30, 2007 7:09 pm

I don't think heats going to be an issue. Got a custom DIY air kit in it anyway.

Anyone got one of these fitted and a pic?

Fatty · Postby **Fatty** » Fri Nov 30, 2007 7:18 pm

Captain Spank wrote:I don't think heats going to be an issue. Got a custom DIY air kit in it anyway.

how does your custom diy air kit help cool your radiator??????

seriously, that bit looks like it's not meant to be there. it looks like it's just there to make manufacturing easier, and should be removed before fitting. many aftermarket lips have mould marks / tabs that need to be cleaned up.

i think it will actually look heaps better without it, and be more effective, but thats just me i guess. it's your car so do what you think is best.

Juffa · Postby **Juffa** » Fri Nov 30, 2007 8:21 pm

Captain Spank wrote: Does this mean I'll have to drill holes into the factory front spoiler?

CS

So you are the one that got that on E-bay

When fitting a similar style vary garage nose I had to drill holes in the original nose. I clamped the spoler in place and then using the holes in the spoiler as a guide I did the drilling. Did the spoiler come with the necessary nuts/bolts?

J

green_comet · Postby **green_comet** » Fri Nov 30, 2007 8:41 pm

Fatty wrote:
Captain Spank wrote:I don't think heats going to be an issue. Got a custom DIY air kit in it anyway.

how does your custom diy air kit help cool your radiator??????

My choice for post of the year.. :mrgreen:

Captain Spank · Postby **Captain Spank** » Fri Nov 30, 2007 9:11 pm

Yep E-bay. Grabbed it at the last moment. Almost forgot about it. I was busy outside and I like \"F**K that lip!\". Jumped on and had like 45 sec's left, I was surprised nobody else bidded for the price.

But no nuts & bolts :cry:

Also I don't see how this would really restrict air, the over hang inside the spoiler sits pretty flush.

Fatty · Postby **Fatty** » Fri Nov 30, 2007 9:39 pm

Captain Spank wrote:Also I don't see how this would really restrict air, the over hang inside the spoiler sits pretty flush.

well the pic is rather blurry, so maybe it's my imagination, but it looks like there is a peice of plastic at the back of the lip, sitting up vertically and blocking half the mouth ? ? ? ?

Captain Spank · Postby **Captain Spank** » Fri Nov 30, 2007 9:45 pm

Aaargh then I certainly would be cutting it. Yeah my PDA takes crappy pics, but it's better than my phones camera and I can't seem to find my digi cams cable to upload better pics to my pc.
But here's another pic from the e-bay one. The centre bit goes straight back sitting flush on the mouth.

Ajay · Postby **Ajay** » Fri Nov 30, 2007 9:46 pm

i was going to bid!.. buuuut.. when it said no mounting hardware/holes i didnt want to end up with the same problem you have now lol

should look good once on though

lowmiata · Postby **lowmiata** » Fri Nov 30, 2007 9:46 pm

Fatty wrote:
Captain Spank wrote:Also I don't see how this would really restrict air, the over hang inside the spoiler sits pretty flush.

well the pic is rather blurry, so maybe it's my imagination, but it looks like there is a peice of plastic at the back of the lip, sitting up vertically and blocking half the mouth ? ? ? ?

I think its just how the photo is taken

FWIW
double sided tape everywhere
and then screws in the wheel arch

doublesided tape wont let go because whole lip would have to go forward and screws into wheel arch stop it going forward :mrgreen:

Fatty · Postby **Fatty** » Fri Nov 30, 2007 9:51 pm

Captain Spank wrote:Aaargh then I certainly would be cutting it. Yeah my PDA takes crappy pics, but it's better than my phones camera and I can't seem to find my digi cams cable to upload better pics to my pc.
But here's another pic from the e-bay one. The centre bit goes straight back sitting flush on the mouth.

ah excellent, that looks fine. false alarm then! sorry 'bout that :oops:

Captain Spank · Postby **Captain Spank** » Fri Nov 30, 2007 11:13 pm

na, blam the crap pda.

Yeah Lowmiata. I was thinking the same thing, especially the only real place this lip can be screwed in is in the wheel arch & front centre...of course I'm not going to drill in the middle. :lol:

Juffa · Postby **Juffa** » Sat Dec 01, 2007 9:43 am

Captain Spank wrote:Yep E-bay. Grabbed it at the last moment. Almost forgot about it. I was busy outside and I like "F**K that lip!". Jumped on and had like 45 sec's left, I was surprised nobody else bidded for the price.

But no nuts & bolts
Also I don't see how this would really restrict air, the over hang inside the spoiler sits pretty flush.

I was thinking of bidding. The guys selling it lives a couple of suburbs from me, so I asked if I could have a look at it, or if he could supply more photos. He told me it was stored in Mitcham and he would not be able to let me see it or supply more photos until after the auction was over, so I chose not to bid.

J

bruce · Postby **bruce** » Sat Dec 01, 2007 10:49 am

Invest in a tube of Sikaflex. It's like a tube of black silicone but it is what the panel beaters use to stick things onto cars. It will stick forever and you will never remove it (the spoiler will snap before this stuff lets go).

On second thoughts, maybe a ton of 3M tape might do the trick.