Excessive rattling so I think something's loose in there.
Wanting to take it apart to check...
Thanks
how to remove passenger side mirror?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Driver
- Posts: 87
- Joined: Thu Aug 12, 2004 2:53 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
- Mr_Q
- Racing Driver
- Posts: 814
- Joined: Tue Aug 10, 2004 4:41 pm
- Vehicle: NB SE
- Location: Sydney, Australia
- Contact:
You'll probably need to twist the base around to expose the screws and then just unscrew and remove. As Andrew says: more info might help. If you've got power mirrors you'll need to disconnect it.
One thing to watch - if it's an NA6 you'll probably break it if you try doing anything with it. The bolt holding the mirror to the base is usually only held together by rust.
One thing to watch - if it's an NA6 you'll probably break it if you try doing anything with it. The bolt holding the mirror to the base is usually only held together by rust.
Mister Q
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
-
- Driver
- Posts: 87
- Joined: Thu Aug 12, 2004 2:53 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
- Mr_Q
- Racing Driver
- Posts: 814
- Joined: Tue Aug 10, 2004 4:41 pm
- Vehicle: NB SE
- Location: Sydney, Australia
- Contact:
The base itself should twist without breaking (although it might be a bit stuff). The bit that normally breaks is the small ball joint bit where the mirror is fixed to the base. You could soak it with WD40 or similar and cross your fingers, but basically if it's rusted through ...
Mister Q
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 161 guests