Clubman badge (prototype page 8)
Moderators: timk, Stu, zombie, Andrew, -alex, miata
Clubman badge (prototype page 8)
Hi All,
I had my car recently resprayed from top to toe.
The panel beater removed all my badges and threw them out.
So after replacing them all, I’m having trouble getting a clubman badge for the boot lid
Does anyone know where I can get one from.
I had my car recently resprayed from top to toe.
The panel beater removed all my badges and threw them out.
So after replacing them all, I’m having trouble getting a clubman badge for the boot lid
Does anyone know where I can get one from.
-
- Speed Racer
- Posts: 3175
- Joined: Fri Feb 03, 2006 10:39 am
- Vehicle: NA6
- Location: Melbourne
clubman sticker
Cool that would work well any chance of finding out who that may be.
The car was done as a favour, cost next to nothing but took over 6 months.
Looks like it just rolled out of a showroom now though.
When parts sit around a busy panel beater things go missing like my rear mud flaps and something falling on my boot lid.
All is good now just need that badge.
The car was done as a favour, cost next to nothing but took over 6 months.
Looks like it just rolled out of a showroom now though.
When parts sit around a busy panel beater things go missing like my rear mud flaps and something falling on my boot lid.
All is good now just need that badge.
Last edited by silverback2002 on Tue Nov 20, 2007 8:39 pm, edited 1 time in total.
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
They are not avaliable anymore.. Mine was stolen when I first got my car a few years back. I looked for months, and contacted everyone you can think of.
I found one person that had an original spare clubman badge, but he didnt want to sell it.
I even looked into getting a few made up, I scanned and photoshopped the badge to be spot on with the original. Then when I went to get them made up, I was told no smaller than a run of 500 badges.
Goodluck..
I found one person that had an original spare clubman badge, but he didnt want to sell it.
I even looked into getting a few made up, I scanned and photoshopped the badge to be spot on with the original. Then when I went to get them made up, I was told no smaller than a run of 500 badges.
Goodluck..
-
- Speed Racer
- Posts: 3175
- Joined: Fri Feb 03, 2006 10:39 am
- Vehicle: NA6
- Location: Melbourne
Re: clubman sticker
silverback2002 wrote:Cool that would work well any chance of finding out who that may be.
wait for them to see this thread i guess. maybe someone else will read this and offer more info.
also, you could try doing a search on "clubman badge" or "clubman sticker" using the search function at the bottom of the page.
- Tezzax5
- Racing Driver
- Posts: 908
- Joined: Mon Jun 11, 2007 12:00 pm
- Vehicle: NB SP
I have an excellent condition sticker on the back and the bilstein sticker that fits on the left side front mudguard....But i don't have a camera that i feel will be good enough to do a macro type image..
If anyone in brissie has a good enough camera to take snaps to help this guy out....
As an alternative one of the people i work with has family that works for the company that does alloy work(water jet) for stone brothers...maybe do a replica in .06 alloy and polish it up? No idea of cost though!
If anyone in brissie has a good enough camera to take snaps to help this guy out....
As an alternative one of the people i work with has family that works for the company that does alloy work(water jet) for stone brothers...maybe do a replica in .06 alloy and polish it up? No idea of cost though!
- Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
What Fatty said, go back straight away, like TODAY! and tell him that those badges are not available anymore and that he is a moron (well maybe not the last part).
But get him to give you a refund cause now you have to get new ones made up.
At the least, get him to rummage through the bin to salvage them.
I bet you a 100 bucks the reason why he threw them out was that he mangled them taking them off.
What a retard.
But get him to give you a refund cause now you have to get new ones made up.
At the least, get him to rummage through the bin to salvage them.
I bet you a 100 bucks the reason why he threw them out was that he mangled them taking them off.
What a retard.
- Benny
- Speed Racer
- Posts: 2607
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NB SP
- Location: Gorgeous Sydney
- Contact:
If the badge was available from Mazda, they would probably cost you $30-$40 each, or even more.
To get 500 pieces made would probably cost you around $1,500.00 all up (or even less).
Therefor, if you could sell 20 of them, and I'm sure that there are 20 Clubman owners on this forum that would buy one, then if you charged say $50 each for them, that would almost cover the charge of making them, and then you would have 480 spares!
I'm sure if they were available, you could sel them to Mazda dealers, clubs and MX5 Mania as well.
After all, to someone who knows, the Clubman badge is worth at least $500 on the right car when buying it.
To get 500 pieces made would probably cost you around $1,500.00 all up (or even less).
Therefor, if you could sell 20 of them, and I'm sure that there are 20 Clubman owners on this forum that would buy one, then if you charged say $50 each for them, that would almost cover the charge of making them, and then you would have 480 spares!
I'm sure if they were available, you could sel them to Mazda dealers, clubs and MX5 Mania as well.
After all, to someone who knows, the Clubman badge is worth at least $500 on the right car when buying it.
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team
- bigdog
- King of the kennel
- Posts: 2233
- Joined: Wed May 25, 2005 3:07 pm
- Vehicle: NB SP
- Location: Blue Mountains
- Contact:
- fastfreddygassit
- Waitin' for a mate
- Posts: 1773
- Joined: Sat Jun 25, 2005 8:00 pm
- Vehicle: NB SE
- Location: Waitin' for a mate in Melbourne somewhere
- Contact:
Re:
bigdog wrote:Andrew wrote:Just emailed a couple of people regarding that badge and am awaiting their reply.
...and befor anyone asks, no i'm not going to stick one on my car
no room with all the other badges eh??
*chortle*
so true...
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: Google [Bot] and 174 guests