My first time out without the hardtop in about 2 years and the top gets slashed. Luckily it's not too long - maybe 3 or 4cm
Anyone recommend a DIY solution?
Thanks
Seems to be so many dickheads in Sydney these days...
softtop repair kit?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Driver
- Posts: 87
- Joined: Thu Aug 12, 2004 2:53 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
- jules
- Guitar Hero
- Posts: 3562
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Sydney, previously HQ - GC Dodgy Inc.
- Contact:
Sorry , can't help myself.
Step 1: Buy compass
Step 2: Find North
Step 3: Drive until you see a sign \"Welcome to Queensland\".
Step 4: Fit soft top boot and forget about soft top.
Failing that try Uticolour. They come highly recommended and are all over the place.
Jules
Step 1: Buy compass
Step 2: Find North
Step 3: Drive until you see a sign \"Welcome to Queensland\".
Step 4: Fit soft top boot and forget about soft top.
Failing that try Uticolour. They come highly recommended and are all over the place.
Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
- ducktape69
- Racing Driver
- Posts: 997
- Joined: Tue Dec 13, 2005 11:57 pm
- Vehicle: ND - 2 GT
- Location: Sydney....Westside
- Andrew
- Speed Racer
- Posts: 2630
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NC
- ZenArcher
- Fast Driver
- Posts: 170
- Joined: Sat Sep 25, 2004 10:40 pm
- Vehicle: ND - 2 GT
- Location: Nowra
- Contact:
Permatex make a full on vinyl repair kit. They even include special paint to recolour the repaired area the same colour as the original vinyl.
Not sure how good it is. But I have seen it at the local Autobarn. There are two kits. One with the paint and one without. The one with the paint costs $30 or there abouts.
Might be worth a try for a DIY option.
Not sure how good it is. But I have seen it at the local Autobarn. There are two kits. One with the paint and one without. The one with the paint costs $30 or there abouts.
Might be worth a try for a DIY option.
- Captain Spank
- Fast Driver
- Posts: 105
- Joined: Tue Jan 23, 2007 12:22 pm
- Vehicle: NA6
- Location: Victoria
As a slighty off que option you could have a mazda emblem badge made up on some vinyl, stiched or printed, then stitch it over the hole (depending on where the holes located & you'd need to seal it all behind the stiching etc...).
Just mine was repaired but looks a little dodgy, so I'm currenty in the midst of getting a bade of sorts to put over the patch, just gives it that bit more enthusiasts look too.
Just mine was repaired but looks a little dodgy, so I'm currenty in the midst of getting a bade of sorts to put over the patch, just gives it that bit more enthusiasts look too.
Rice, rice baby. NA6 on the road to bling.
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 57 guests