Which pin is pin 10? I looked in the diagnosis box but couldn't see any pin assignments?
Where's the screw you're meant to be adjusting on an NB8A? Is it the screw that sets the base level of the throttle, or is it a different one? Might give this a crack next weekend just for fun.
idle dip - faulty O2 sensor?
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
-
EGG80X
- Racing Driver
- Posts: 577
- Joined: Tue Feb 08, 2005 6:56 pm
- Vehicle: ND - 2 GT
- Location: Sydney
-
Alex
- Racing Driver
- Posts: 1654
- Joined: Thu Jan 04, 2007 6:54 am
- Vehicle: NB8A
- Location: Sydney
not that bad, it's never stalled on my but sometimes I notice when I pull up at the lights it drops to about 500-600rpm for a second or 2 before going back to normal ie 800, after that (while I'm still stationary) if I rev it in neutral it drops back to exactly 800 every time
Red NB8A - BD rollbar - Hardtop
-
marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
Re:
SM wrote:not that bad, it's never stalled on my but sometimes I notice when I pull up at the lights it drops to about 500-600rpm for a second or 2 before going back to normal ie 800, after that (while I'm still stationary) if I rev it in neutral it drops back to exactly 800 every time
So does yours happen even if your engine is warm?
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 3 guests
