Sydney Dodgy Day - 14 October HUUUUUUUGE :)

Caffeine · Postby **Caffeine** » Wed Oct 03, 2007 3:54 pm

If anyone has trouble lights or flood lights bring them too, makes it easier to see in the underground parking area

Caffeine · Postby **Caffeine** » Wed Oct 03, 2007 4:04 pm

Yes I have a beer bin, at the moment it's stocked with becks, heineken, blue tongue and asahi, although I can't guarantee it'll still be there by the 14th, bathurst is this weekend after all!

Uncle Arthur · Postby **Uncle Arthur** » Wed Oct 03, 2007 6:38 pm

Caffeine wrote:Yes I have a beer bin, at the moment it's stocked with becks, heineken, blue tongue and asahi, although I can't guarantee it'll still be there by the 14th, bathurst is this weekend after all!

A beer bin is different to a wheely-bin-o-beer......

Ask Jules

jules · Postby **jules** » Wed Oct 03, 2007 8:57 pm

C'mon, no \"distilled\" Dodgy Days allowed.
You need proper wingzzzzz and a wheely bin!

Jules

AJ · Postby AJ » Wed Oct 03, 2007 9:00 pm

bloody sydneysiders would probably want a keg of Stella Artois or Asahi tho :roll:

Caffeine · Postby **Caffeine** » Fri Oct 05, 2007 7:08 am

AJ wrote:bloody sydneysiders would probably want a keg of Stella Artois or Asahi tho

nothing wrong with stella or asahi AJ

I had some XXXX in queensland recently, it's a bit like a tropical equivalent of fosters

Benny · Postby **Benny** » Fri Oct 05, 2007 2:42 pm

And we all know why Queenslanders call their beer XXXX.

It's just that they can't spell BEER.

AJ · Postby AJ » Fri Oct 05, 2007 6:20 pm

no benny, it's just you aren't allowed to display the word \"sh*t\" on a beer can :lol:

idb000 · Postby **idb000** » Fri Oct 05, 2007 8:16 pm

Hey all, I haven't yet been to a dodgy day, so I hope to make this my first. I haven't got anything to do to the car, but would like to come along and meet some more forumites and put some names to faces. I'll see how I go on the day, but I hope to see you all there.

Caffeine, you have PM

Thanks
Ian

Caffeine · Postby **Caffeine** » Mon Oct 08, 2007 1:00 pm

Well, all bits are either here, or on the way. Picked up bearing grease, axle stands (a second set so I can have all 4 wheels up at once), engine oil (didn't realise I had a full one at home, oh well, spares for the future), wire brushes, blowtorch, cold chisel (for the bearing lockrings) and wheel bearings.

On their way via post are oil filter, suspension bushes, brake fluid and brake pad guide plates.

On the day, bring what food & beverages you want, I'll have an old bar fridge set up as an ice chest and an electric BBQ (it's underground, pretty dodgy with a flame BBQ I think...)

Garry · Postby **Garry** » Mon Oct 08, 2007 4:28 pm

Is the Bevan timing belt change still happening? I think my idler/tensioner pulleys are on the way out and it would be nice to watch Bevan work out how to replace everything so I can do my own at a later date. I did half a timing belt change on my NA so have a pretty good idea about what to do but I'm not sure what to do about the VVT hardware on the valve cover of the NB8B's.

StanTheMan · Postby **StanTheMan** » Mon Oct 08, 2007 4:48 pm

timing belt & lining up the Timing belt is a piece of cake. Forgetting to tighten bolts is the hard bit. cause then you have to spend 90 min pulling everything back down again & putting it back togther.....
don't ask me how i know....... :oops:

If Bevan is still doing it...... just make sure you have all the correct torque values on a piece of paper before we start. with no complications.....2.5 hrs max. first time around took me 6 :lol:

Only painfull bit I found was undoing the lower bolt on the water pump inlet.

just so i dont forget...count 19 teeth on the timingbelt for double checking

Bevan · Postby **Bevan** » Mon Oct 08, 2007 5:10 pm

Yep, sure is going ahead! I got all the parts in the mail 2 weeks ago EXCEPT... I need another Camshaft Oil Seal (I thought 2 came with the purchase seeing as there were 2 in the photo), and the waterpump gasket (MX5 parts ran out of them).

Better call Mazda I suppose...

blackster · Postby **blackster** » Tue Oct 09, 2007 12:44 am

If some more hands are needed then I am happy to lend my dodgy hands for a few hours, havent got anything planned for my car.

I think somewhere i read that this is being held in canterbury?