Still haven't had a chance to finish off the flooring eh? Oh well. As you said, it sounds damn nice.
I really need to find some time to just get into the car and do everything I want to do. Maybe over Christmas...
My Audio install, Fibreglassing (lots of pics)
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- Fuzzlet
- Racing Driver
- Posts: 1077
- Joined: Sat Feb 25, 2006 6:35 pm
- Vehicle: ND - 2 GT
- Location: Berowra
- Contact:
Ah very nice. So what was the internal volume of the box in the end? I'm planning on making up a sub box in the same fashion to how you've done. Starting sunday ive got 6 weeks off work, and I've got a few 'projects' I'm planning on undertaking, including making a sub box. Where'd u get your supplies from? Since u live rather close to me it shouldnt be hard to get to them haha
Current: Red 04 SE (Slightly modified) - 133rwkw@7psi - Winner of the Mania Dyno Day 2008
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
- Alex
- Racing Driver
- Posts: 1654
- Joined: Thu Jan 04, 2007 6:54 am
- Vehicle: NB8A
- Location: Sydney
I got my first bit of fibreglassing stuff from bunnings, $53 for about 1L with everything required
then I went to FGI and got 4L for the same price so I would go there instead
FGI - Brookvale
14 Clearview Place
Brookvale NSW 2100
Tel: (02) 9939 1399
Note: if you go there asking about what would be best for a sub-box enclosure they will just give you a blank look. I'll take a look at the product numbers for the stuff I used, it's more technical than I thought with all this waxed or not waxed and the different additives and such.
My enclosure is 22L total
get at least 4 Litres of resin , when I went there they also gave me some mixing trays, measuring cups, brushes and paddlepop sticks
then I went to FGI and got 4L for the same price so I would go there instead
FGI - Brookvale
14 Clearview Place
Brookvale NSW 2100
Tel: (02) 9939 1399
Note: if you go there asking about what would be best for a sub-box enclosure they will just give you a blank look. I'll take a look at the product numbers for the stuff I used, it's more technical than I thought with all this waxed or not waxed and the different additives and such.
My enclosure is 22L total
get at least 4 Litres of resin , when I went there they also gave me some mixing trays, measuring cups, brushes and paddlepop sticks
Red NB8A - BD rollbar - Hardtop
- Fuzzlet
- Racing Driver
- Posts: 1077
- Joined: Sat Feb 25, 2006 6:35 pm
- Vehicle: ND - 2 GT
- Location: Berowra
- Contact:
Sweet thanks for that. The sub i'm using needs at least 26L, so it shouldnt be hard to reach that mark
Current: Red 04 SE (Slightly modified) - 133rwkw@7psi - Winner of the Mania Dyno Day 2008
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
- Alex
- Racing Driver
- Posts: 1654
- Joined: Thu Jan 04, 2007 6:54 am
- Vehicle: NB8A
- Location: Sydney
and this is how I can adjust the bass from inside the cabin, it uses a phone line sort of connector to link with the amp in the boot letting me control the gains from inside the cabin, and it's sorta stealthy too.
I used some adhesive velcro on the back of it (scratchy side of velcro) so it sticks to the interior carpet, otherwise everytime I sit down it slides under the seat
I used some adhesive velcro on the back of it (scratchy side of velcro) so it sticks to the interior carpet, otherwise everytime I sit down it slides under the seat
Red NB8A - BD rollbar - Hardtop
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 0 guests