hi all. I currently have koni/eibach and noticed the driver side was sagging by 1cm front and back so i decided to swap from left to right and vice versa. i drove it down the coast yesterday and let it settle and this morning it was the same ie sagging on the right side. Is there something else i need to be looking at? btw the heights of the clips on the struts are the same so its not the height adjustment if you were wondering.
thanks
suspension sag
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Fast Driver
- Posts: 260
- Joined: Tue Sep 04, 2007 12:21 pm
- Vehicle: ND - 2 GT
- Location: Brisbane
- Mr_Q
- Racing Driver
- Posts: 814
- Joined: Tue Aug 10, 2004 4:41 pm
- Vehicle: NB SE
- Location: Sydney, Australia
- Contact:
Did you tighten the bolts with the suspension loaded - which is the correct method. If they are not loaded when torqued, it might sit a little higher or lower if loaded. Other things that can affect ride hight slightly is the rubber washer (name?) on the spring perch (they have these on the NB's, don't know about NA's) and bump stops if your car it fairly low. The rubber bushings in the upper mounts is also another possibility. Are any of these bits missing on the right side of your NA?
Not the perfect diagram but this should give you an idea of what you should have (to see if anything is missing).
I’m mainly referring to parts 28-012A and 28-0A3
Not the perfect diagram but this should give you an idea of what you should have (to see if anything is missing).
I’m mainly referring to parts 28-012A and 28-0A3
-
- Fast Driver
- Posts: 260
- Joined: Tue Sep 04, 2007 12:21 pm
- Vehicle: ND - 2 GT
- Location: Brisbane
thanks drifter and mr q. yeah the surface is pretty level. reversed car and measured still the same.
as for bumpstops, bushes etc they are same both sides.
I cant understand why its doing this as it was a complete swap so i didnt disassemble the strut from the springs.
anyone enlighten me on what else determines right height besides the shocks+springs or is that it?
thanks
as for bumpstops, bushes etc they are same both sides.
I cant understand why its doing this as it was a complete swap so i didnt disassemble the strut from the springs.
anyone enlighten me on what else determines right height besides the shocks+springs or is that it?
thanks
- Garry
- Speed Racer
- Posts: 3481
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: NB SP
- Location: God's Country
- Contact:
-
- Fast Driver
- Posts: 260
- Joined: Tue Sep 04, 2007 12:21 pm
- Vehicle: ND - 2 GT
- Location: Brisbane
Re:
Curly wrote:GP14 wrote:anyone enlighten me on what else determines right height besides the shocks+springs or is that it?
How many pies did you eat on the run up and down the coast?
i only had 1 yatala pie on the way back and fyi my friend i heavier than me
but seriously doesn't anyone have a clue. Where is the mx5 god when you need him/her?
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 222 guests