voodoo knob from mx5 mania
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Driver
- Posts: 87
- Joined: Thu Aug 12, 2004 2:53 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
voodoo knob from mx5 mania
Does anyone know how much they charge for the standard spun aluminium knob? The website just says 'from $60' and no one is picking up the phone...
Thx
Thx
- Bevan
- Speed Racer
- Posts: 2599
- Joined: Tue Nov 16, 2004 8:18 pm
- Vehicle: ND - 2 GT
- Location: N-West Sydney
Re: voodoo knob from mx5 mania
I'm not so sure if they can get them anymore. Send them an email or just keep trying on the phone. They've got a couple of extra guys there for the phone and over the counter stuff now so they were probably dealing with a customer on the phone or in the shop at the time.atomic wrote:Does anyone know how much they charge for the standard spun aluminium knob? The website just says 'from $60' and no one is picking up the phone...
Thx
- Ajay
- Racing Driver
- Posts: 901
- Joined: Mon Dec 11, 2006 6:07 pm
- Vehicle: NA6
- Location: Western Sydney, NSW
- Contact:
-
- Driver
- Posts: 87
- Joined: Thu Aug 12, 2004 2:53 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
- sliq
- Speed Racer
- Posts: 3414
- Joined: Sat Jan 13, 2007 12:33 am
- Vehicle: ND - 2 GT
- Location: Sydney
- Contact:
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
-
- Speed Racer
- Posts: 3175
- Joined: Fri Feb 03, 2006 10:39 am
- Vehicle: NA6
- Location: Melbourne
this might sound like a dumb question, but does the knob get hot to the touch at all? i know when i touch the actual gear stick on my car it is often very hot. so i figure if a etal knob is attached to this, then that would heat up too ? ? currently with the plastic / leather knob this is not an issue.
- PUR157
- Racing Driver
- Posts: 967
- Joined: Sun Sep 17, 2006 5:26 pm
- Vehicle: Clubman
- Location: Sydney, Capital of Australia
- Contact:
This is what I got... a forum buy through OzHonda contacts... hehe
Its the Razo RA42/43 (whichever is the gunmetal one)
It's metal... and I can feel the heat through the transmission tunnel too when I put my hand on the gear boot... but somehow when it comes to the knob... it's still cool to the touch! Maybe it has something to do with the plastic collar?
Its the Razo RA42/43 (whichever is the gunmetal one)
It's metal... and I can feel the heat through the transmission tunnel too when I put my hand on the gear boot... but somehow when it comes to the knob... it's still cool to the touch! Maybe it has something to do with the plastic collar?
Oneness of Man and Machine
- Mr_Q
- Racing Driver
- Posts: 814
- Joined: Tue Aug 10, 2004 4:41 pm
- Vehicle: NB SE
- Location: Sydney, Australia
- Contact:
They used to be around $95 for the Voodoo Magnum. They also used to take a while to come in and sell out in a couple of days.
I don't imagine things have got any less busy since I was there, so if the phone isn't answered ... leave a voice mail.
The knobs do get a bit warm in the sun and cold on a winter morning, but not unbearably so.
Oh, and they're really, really nice to use.
I don't imagine things have got any less busy since I was there, so if the phone isn't answered ... leave a voice mail.
The knobs do get a bit warm in the sun and cold on a winter morning, but not unbearably so.
Oh, and they're really, really nice to use.
Mister Q
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
- chrislevingston
- Fast Driver
- Posts: 171
- Joined: Sat May 03, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Adelaide
- Contact:
I have a Voodoo Magnum, and it fills your hand better than the tiny NA6 one - which used to make the palm of my hand ache after a spirited (read \"lots of gear changes\") lunchtime run in the Adelaide Hills.
Chris
Chris
1990 "TOY MX5" - Red, of course!
Kings, Konis, LSD, Genie system, grille, Voodoo knob, braces, 14 degrees ATDC, woodgrain dash,style bars and lots of work making the rubber bands go around faster.
Kings, Konis, LSD, Genie system, grille, Voodoo knob, braces, 14 degrees ATDC, woodgrain dash,style bars and lots of work making the rubber bands go around faster.
- Andy Wana
- Fast Driver
- Posts: 362
- Joined: Tue Sep 26, 2006 11:16 pm
- Vehicle: ND - 2 GT
- Location: Sydney, Australia
Atomic, I have the Voodoo spun aluminium knob for my MX5
It looks and feels great but the brushed effect on the knob do wear off since it is not protected/coated (wear and tear)
I got mine online from Team Voodoo since Mania was out of stock at the time
If you want a relatively cheap knob with the same looks/feel, you can go for the APX titanium gear knob
It's supposed to be made out of real titanium (oooh .... ahhhh) and it has the burnt-exhaust-tip-rainbow (I made that word up) look
I think it retails for $50 last time I read it in another forum
It looks and feels great but the brushed effect on the knob do wear off since it is not protected/coated (wear and tear)
I got mine online from Team Voodoo since Mania was out of stock at the time
If you want a relatively cheap knob with the same looks/feel, you can go for the APX titanium gear knob
It's supposed to be made out of real titanium (oooh .... ahhhh) and it has the burnt-exhaust-tip-rainbow (I made that word up) look
I think it retails for $50 last time I read it in another forum
I ♥ asymmetry
-
- Driver
- Posts: 87
- Joined: Thu Aug 12, 2004 2:53 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
Yeah I saw that other thread and looks good for the price but most ppl seem to suggest the voodoo for the mx5.
The thing is, it looks like it can be purchased for similar money if buying online so I guess I'm wondering what makes the voodoo so desirable compared to other similar ones out there?
Suggestions?
The thing is, it looks like it can be purchased for similar money if buying online so I guess I'm wondering what makes the voodoo so desirable compared to other similar ones out there?
Suggestions?
- jules
- Guitar Hero
- Posts: 3562
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Sydney, previously HQ - GC Dodgy Inc.
- Contact:
- Ajay
- Racing Driver
- Posts: 901
- Joined: Mon Dec 11, 2006 6:07 pm
- Vehicle: NA6
- Location: Western Sydney, NSW
- Contact:
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 2 guests