Soft top replacement
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Driver
- Posts: 38
- Joined: Mon Feb 06, 2006 1:34 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Soft top replacement
Hi
I did a search and thought i would get lots of hits, ...
alas no. I have a NA and my soft top is getting to the end of its life.
I live in Chatswood, Sydney.
I think i am handy enough to replace it and info exist on the web...
I suspect that there are not many wrecker versions as i suspect
they are damaged in bad accidents..
>> So recommedations on replacement options ?
I know you can get ones from the US and the UK . Anyone do that ?
Is the US Miata exactly the same as an aussie NA ?
Thanks
I did a search and thought i would get lots of hits, ...
alas no. I have a NA and my soft top is getting to the end of its life.
I live in Chatswood, Sydney.
I think i am handy enough to replace it and info exist on the web...
I suspect that there are not many wrecker versions as i suspect
they are damaged in bad accidents..
>> So recommedations on replacement options ?
I know you can get ones from the US and the UK . Anyone do that ?
Is the US Miata exactly the same as an aussie NA ?
Thanks
- Bevan
- Speed Racer
- Posts: 2599
- Joined: Tue Nov 16, 2004 8:18 pm
- Vehicle: ND - 2 GT
- Location: N-West Sydney
There are HEAPS of options on ebay. Just go to www.ebay.com.au and search for mx5 and bask in the reflective glory of all the soft tops on there.
- Craig
- Speed Racer
- Posts: 6612
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: Non MX-5
- Location: Sydney
Re: Soft top replacement
Greg Roberts wrote:I have a NA and my soft top is getting to the end of its life. I live in Chatswood, Sydney.
Give MX5 Mania a call and see if you can get a roof and mechanism of a newer NB with the glass window back.
*** Audi Q5 55 Sportback - HYBRID! Zero -100 in 5.3 seconds! ***
-
- Driver
- Posts: 38
- Joined: Mon Feb 06, 2006 1:34 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Thanks
Are \"flexglas\" windows legal in australia and do they suffer
the same scratch/fad issues as the plastic ?
i.e. is this better than just plastic (glass too expensive) ?
http://cgi.ebay.com.au/Mazda-MX-5-MX5-E ... dZViewItem
or
http://cgi.ebay.com.au/Mazda-MX5-Eunos- ... dZViewItem
Are \"flexglas\" windows legal in australia and do they suffer
the same scratch/fad issues as the plastic ?
i.e. is this better than just plastic (glass too expensive) ?
http://cgi.ebay.com.au/Mazda-MX-5-MX5-E ... dZViewItem
or
http://cgi.ebay.com.au/Mazda-MX5-Eunos- ... dZViewItem
- Captain Spank
- Fast Driver
- Posts: 105
- Joined: Tue Jan 23, 2007 12:22 pm
- Vehicle: NA6
- Location: Victoria
I'll be ordering a new hood from these guys in a few weeks;
http://www.gomiata.com/robsoftop.html
U.S. imports, but with our current exchange rate a Robins $499 softop with defogger glass (no zip) should set you back just over $580 AUS + delivery, which shouldn't be too much to Oz.
Another one to check that has some fairly cheap parts is this NZ site.
http://www.malibugold.co.nr
Good luck,
CS
http://www.gomiata.com/robsoftop.html
U.S. imports, but with our current exchange rate a Robins $499 softop with defogger glass (no zip) should set you back just over $580 AUS + delivery, which shouldn't be too much to Oz.
Another one to check that has some fairly cheap parts is this NZ site.
http://www.malibugold.co.nr
Good luck,
CS
- Ajay
- Racing Driver
- Posts: 901
- Joined: Mon Dec 11, 2006 6:07 pm
- Vehicle: NA6
- Location: Western Sydney, NSW
- Contact:
- Captain Spank
- Fast Driver
- Posts: 105
- Joined: Tue Jan 23, 2007 12:22 pm
- Vehicle: NA6
- Location: Victoria
- Ajay
- Racing Driver
- Posts: 901
- Joined: Mon Dec 11, 2006 6:07 pm
- Vehicle: NA6
- Location: Western Sydney, NSW
- Contact:
-
- Driver
- Posts: 38
- Joined: Mon Feb 06, 2006 1:34 pm
- Vehicle: ND - 2 GT
- Location: Sydney
I'm tempted to give one of these a go from prestige autotrim on ebay..
http://cgi.ebay.com.au/Mazda-MX5-MX-5-Eunos-Glass-Window-Fabric-Soft-Top_W0QQitemZ190138657948QQihZ009QQcategoryZ55437QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
[url]http://cgi.ebay.com.au/Mazda-MX5-MX-5-Eunos-Glass-Window-Mohair-Soft-Top_[url]W0QQitemZ190138682253QQihZ009QQcategoryZ55437QQssPageNameZWDVWQQrdZ1QQcmdZViewItem[/url]
i believe bdscott has used this one yes? not sure if it is stayfast or the mohair version though ?
some photos here on his cardomain :
anyone know the material used on the NC softtop?
CHeers
[/img][url][/url]
http://cgi.ebay.com.au/Mazda-MX5-MX-5-Eunos-Glass-Window-Fabric-Soft-Top_W0QQitemZ190138657948QQihZ009QQcategoryZ55437QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
[url]http://cgi.ebay.com.au/Mazda-MX5-MX-5-Eunos-Glass-Window-Mohair-Soft-Top_[url]W0QQitemZ190138682253QQihZ009QQcategoryZ55437QQssPageNameZWDVWQQrdZ1QQcmdZViewItem[/url]
i believe bdscott has used this one yes? not sure if it is stayfast or the mohair version though ?
some photos here on his cardomain :
anyone know the material used on the NC softtop?
CHeers
[/img][url][/url]
- meanmx
- Racing Driver
- Posts: 1493
- Joined: Mon Aug 14, 2006 11:41 pm
- Vehicle: NB8B
- Location: Point Cook, Melbourne
Yep that's mine. It's mohair with the glass rear window and I fitted all by my lonesome. Took about 6 hours. 6 very very long hours. Absolutely no problems installing it at all and I only just discovered a small problem with it now after a year. The top of the roof when it is open pushes down on the plastic piping around the back screen and is causing some wearing but nothing major. This will be fixed soon be raising the stops underneath the frame slightly higher. Cost $995 fully delivered and there's no worries about it getting broken unless the postie is very very hamfisted. It is very strong glass.
Ben
Ben
2014 VW Mk7 Golf R
2001 Black NB8B viewtopic.php?f=57&t=58136
1986 Mazda Luce Royal Classic (13BT Mazda 929)
2001 Black NB8B viewtopic.php?f=57&t=58136
1986 Mazda Luce Royal Classic (13BT Mazda 929)
-
- Driver
- Posts: 62
- Joined: Sun Jan 28, 2007 1:40 am
- Vehicle: ND - 2 GT
- Location: Northern Beaches
Re:
Captain Spank wrote:I'll be ordering a new hood from these guys in a few weeks;
http://www.gomiata.com/robsoftop.html
U.S. imports, but with our current exchange rate a Robins $499 softop with defogger glass (no zip) should set you back just over $580 AUS + delivery, which shouldn't be too much to Oz.
Good luck,
CS
So have you ordered one yet, or anybody else? I am thinking I will get one of these ones, after getting told $1200 for a second hand roof at Mania - will be a lot cheaper and brand new. But when putting it in, are they missing anything that you have to take off the old roof? What about the frame, latches etc?
- Captain Spank
- Fast Driver
- Posts: 105
- Joined: Tue Jan 23, 2007 12:22 pm
- Vehicle: NA6
- Location: Victoria
Re:
Captain Spank wrote:I'll be ordering a new hood from these guys in a few weeks;
http://www.gomiata.com/robsoftop.html
U.S. imports, but with our current exchange rate a Robins $499 softop with defogger glass (no zip) should set you back just over $580 AUS + delivery, which shouldn't be too much to Oz.
Good luck,
CS
Ive got had one on for ~2 months now. Very nice kit, and pretty decent instructions, even though i used one of the sets off the internet.
Was a shade under $700 to my door with Express post, so fairly cheap, and cheaper than the Ebay one. From what ive seen on the internet, it sounds, like its the better made one of the 2 as well.
Everything is there. You MAY need the Binding plates if your car doesnt have them, their on the Robbins site (and their part numbers). It even has the stuff to modify the NA frame to the NB style frame.
Looks great too. Was very taught when i put it on, and still is fairly tight. If you can, do it on a warm day, and have a helper. the rain rail is not a one man job by any means...
Re:
Got mine from them too....MOHAIR...its greatmeanmx wrote:Yep that's mine. It's mohair with the glass rear window and I fitted all by my lonesome. Took about 6 hours. 6 very very long hours. Absolutely no problems installing it at all and I only just discovered a small problem with it now after a year. The top of the roof when it is open pushes down on the plastic piping around the back screen and is causing some wearing but nothing major. This will be fixed soon be raising the stops underneath the frame slightly higher. Cost $995 fully delivered and there's no worries about it getting broken unless the postie is very very hamfisted. It is very strong glass.
Ben
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 128 guests