My new seats
Moderators: timk, Stu, -alex, miata, zombie, Andrew
- deez
- Fast Driver
- Posts: 341
- Joined: Thu Nov 02, 2006 9:20 pm
- Vehicle: ND - 2 GT
- Location: Sydney
- Contact:
- Boags
- Speed Racer
- Posts: 3533
- Joined: Thu Nov 10, 2005 6:25 pm
- Vehicle: NB SP
- Location: Brisvegas
- Contact:
Re:
deez wrote:greencomet... ur sig should read "got offset?" instead ;)
But he hasn't!!


Spartan Motor Sport : http://www.SpartanMS.com.au
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
- deez
- Fast Driver
- Posts: 341
- Joined: Thu Nov 02, 2006 9:20 pm
- Vehicle: ND - 2 GT
- Location: Sydney
- Contact:



Back on topic....I've really taken a liking to those seats but from what you guys are suggesting...it will be a darn pain to fit and I'll end up with less knee and leg room too.
I'm starting to consider some NB seats into an NA instead. Anybody got any thoughts/experience in that regard?
89 Eunos Roadster


- Andy Wana
- Fast Driver
- Posts: 362
- Joined: Tue Sep 26, 2006 11:16 pm
- Vehicle: ND - 2 GT
- Location: Sydney, Australia
Re:
deez wrote::lol:![]()
![]()
Back on topic....I've really taken a liking to those seats but from what you guys are suggesting...it will be a darn pain to fit and I'll end up with less knee and leg room too.
I'm starting to consider some NB seats into an NA instead. Anybody got any thoughts/experience in that regard?
Mr.Q's got NB seats in his NA8 from memory.
They really look good (and I am after a set as well)
But this is really what you want, deez ...



My kidney is ready for transplant if anyone's selling these babies
I ♥ asymmetry
- Okibi
- Speed Racer
- Posts: 10906
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
- Okibi
- Speed Racer
- Posts: 10906
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
- deez
- Fast Driver
- Posts: 341
- Joined: Thu Nov 02, 2006 9:20 pm
- Vehicle: ND - 2 GT
- Location: Sydney
- Contact:
Andy and Okibi....you evil evil geezers
Stop tempting me.
I reckon fixed buckets shouldn't be a problem to fit into a 5....most of the ones I've looked at (Bride, Sparco) are quite narrow. I'm after some tiltbacks though as the car will be a daily as well. Only way is to keep lookin eh?
Thanks heaps Ben for taking the time to type up your experience, much appreciated
At the moment I'm still throwing up between the Justjaps (cheaper) and NB (a lot more expensive, but could be more comfy) seats. Thanks heaps for your info, helps a lot in deciding 

I reckon fixed buckets shouldn't be a problem to fit into a 5....most of the ones I've looked at (Bride, Sparco) are quite narrow. I'm after some tiltbacks though as the car will be a daily as well. Only way is to keep lookin eh?

Thanks heaps Ben for taking the time to type up your experience, much appreciated


89 Eunos Roadster


- kitkat
- Racing Driver
- Posts: 1244
- Joined: Sun Nov 13, 2005 9:23 pm
- Vehicle: ND - 2 GT
- Location: Gold Coast
- Okibi
- Speed Racer
- Posts: 10906
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re:
deez wrote:..I reckon fixed buckets shouldn't be a problem to fit into a 5....


If you had access to a car like this, would you take it back right away? Neither would I.
-
- Racing Driver
- Posts: 1751
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Bayside - Melbourne
- Contact:
Some nice looking seats there guys. Has anyone tried autotecnica seats. While in East Coast Spares (Bentleigh, Melb) a couple of weeks ago they have a pair of the SP4999 in black leather at $400 each. They can be seen on the bottom of the linked page.
http://www.autotecnica.com.au/content/s ... _page2.jpg
J
http://www.autotecnica.com.au/content/s ... _page2.jpg
J
Former owner of Mailbu Stacey, Smurfette and Tweety.
- Okibi
- Speed Racer
- Posts: 10906
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
The A999 is the same sort as was in the SE drift car (i think), that seat in now in Warwick Gate's NA8 so you can make them fit both the NA and NB, but it DID have a custom brackett that bolted directly to the floor without adjustment.
The fact that's it's called the \"wide body\" makes me question if I have the model number correct.

The fact that's it's called the \"wide body\" makes me question if I have the model number correct.

If you had access to a car like this, would you take it back right away? Neither would I.
- Okibi
- Speed Racer
- Posts: 10906
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re:
Okibi wrote:The A999 is the same sort as was in the SE drift car (i think), that seat in now in Warwick Gate's NA8 so you can make them fit both the NA and NB, but it DID have a custom brackett that bolted directly to the floor without adjustment.
I don't know if it was the "narrow" or "wide".
If you had access to a car like this, would you take it back right away? Neither would I.
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 6 guests