Another bloody sensor issue...

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

Post Reply
marky210
Fast Driver
Posts: 131
Joined: Mon Jul 17, 2006 11:51 am
Vehicle: ND - 2 GT
Location: Melbourne

Postby marky210 » Sun Jun 17, 2007 10:52 pm

Hey Lowmiata :D

On my NB8A the wire that comes out of the oxygen sensor runs to the front of my rocker cover where it has a plug and thats the one i unpluged...... On my NA6 it ran to the back of cam cover and was connected to the coil pack so it seems to run diffrently on the NB8A :D

From the test that i done as you described is my oxygen sensor need replacing?

Cheers, Mark :D
99 mx5, Brilliant Black with hardtop, cusco f/brace,intake and AVO turbo kit awaiting install.Tien SS coilover kit,BD Rollbar,16x7 Work Meister's!!
Top
User avatar
lowmiata
Racing Driver
Posts: 848
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: ND - 2 GT
Location: gone fishin
Contact:
Contact lowmiata

Re:

Postby lowmiata » Mon Jun 18, 2007 11:15 am

marky210 wrote:Hey Lowmiata :D

On my NB8A the wire that comes out of the oxygen sensor runs to the front of my rocker cover where it has a plug and thats the one i unpluged...... On my NA6 it ran to the back of cam cover and was connected to the coil pack so it seems to run diffrently on the NB8A :D

From the test that i done as you described is my oxygen sensor need replacing?

Cheers, Mark :D


you would have to start it and drive it to make sure that it doesn't splutter having it idle might not show up the spluttering
EVI15 1998 to 2008
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 4 guests