Bob Jane wheel and tyre package

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Jimi
Fast Driver
Posts: 155
Joined: Tue May 22, 2007 11:51 pm
Vehicle: NA6
Location: Sutho Shire, Sydney

Bob Jane wheel and tyre package

Postby Jimi » Thu Jun 07, 2007 7:39 pm

I just saw Bob Jane selling 15\" wheel and tyre packages for $649... seems very cheap.

http://www.bobjane.com.au/Specials/Wheels.asp

Has anyone had any experience with RJR wheels? Are they reasonable quality?

Cheers,
James.
Red '89 Eunos Roadster, BD Rollover Bar, 1.8 engine conversion - Confucius say: Man beneath car with spanner is not necessarily mechanic!

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Postby Boags » Thu Jun 07, 2007 7:49 pm

When I was looking for my current rims I was tempted by the price tag of the Bob Jane specials of the time. In the end I couldn't get exactly what I wanted so I went elsewhere. Lucky I did because within a month, every Swift, Carolla and Sirion I saw had those same rims... Very glad I passed them up.

You also get the worst tyres on the planet.

Have I put you off sufficiently? Please, if you do get the rims, upgrade the tyres.

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au

Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:

Postby Adam_NAclubman » Thu Jun 07, 2007 7:53 pm

I'd hazard a guess that the wheels will be heavy and basically completely unsuited to a MX5

User avatar
AJ
Speed Racer
Posts: 4349
Joined: Sun Oct 30, 2005 8:27 pm
Vehicle: NC
Location: Gold Coast

Postby AJ » Thu Jun 07, 2007 8:12 pm

& the tyres will be total CRAP, as boagsy mentioned
Image
Don't worry about what people think, they don't do it very often
XMX5 Rogues

User avatar
Grumpy
Fast Driver
Posts: 218
Joined: Tue Feb 13, 2007 9:17 pm
Vehicle: NC
Location: Melbourne

Postby Grumpy » Thu Jun 07, 2007 8:59 pm

I nearly bought them a month or so ago when they were $699. Tyres are Bob Janes own brand. Yokohama C drives were to be an extra $200. Finished up buying very light Starcorp mags from Tempe tyres in Sydney, and C drives through my brothers tyre shop. Total cost $1100 but very very happy with them. Starcorps only weigh about 5kg each.
Sadly MX5 less for a while.
Rebuilding an 89 Honda CRX

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Re:

Postby Boags » Thu Jun 07, 2007 9:59 pm

Grumpy wrote:Tyres are Bob Janes own brand.


They are re-branded Kumho tyres. "Economic High Performance" tyres. :?
Spartan Motor Sport : http://www.SpartanMS.com.au

User avatar
Grumpy
Fast Driver
Posts: 218
Joined: Tue Feb 13, 2007 9:17 pm
Vehicle: NC
Location: Melbourne

Postby Grumpy » Thu Jun 07, 2007 10:22 pm

We just put Kumho tyres on a new mini cabroilet, to replace the run flats. They have given us another 2 seconds around phillip island track. They did cost more than BJ'S tyres though.
Sadly MX5 less for a while.
Rebuilding an 89 Honda CRX

User avatar
deez
Fast Driver
Posts: 341
Joined: Thu Nov 02, 2006 9:20 pm
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Postby deez » Thu Jun 07, 2007 10:39 pm

Kumho's are awesome, though I'm not so sure about rebranded ones. Kumho SPT is what kula is running i think?

Don't go for a tyre and wheel package....if you do...I reckon you're better off heading to MX5 Mania...they've got some decent wheels for reasonable prices, just them if they can hook you up with some tyres too as a package.
89 Eunos Roadster
Image

kula
Racing Driver
Posts: 664
Joined: Sun Jul 10, 2005 6:08 pm
Vehicle: NC
Location: Sydney
Contact:

Postby kula » Thu Jun 07, 2007 11:23 pm

yup, i run Kumho Ecsta SPTs, and for a street tyre, i cant fault them, great value for money...

Kumho's also make some serious motorsport tyres, i really want to try the V70As next, a WRX shod with them won the targa tasmania, and i reckon that means heaps, and i know of a lotus elise with a K20a, which runs the V70s daily, and loves em, he also does low 1:06s at wakefield on em.

bob jane have been around for ages, and i personally would feel a lot better buying wheels from them then smaller newer places, if anything does go wrong, (unlikely) i bet the service would be better.

most cheaper wheels are made in china, and i think someone the size and stature of BJ, would have found the best quality they could get for the price, rather than just finding what's cheap, popular and available.

Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:

Re:

Postby Adam_NAclubman » Thu Jun 07, 2007 11:36 pm

kula wrote:
bob jane have been around for ages, and i personally would feel a lot better buying wheels from them then smaller newer places, if anything does go wrong, (unlikely) i bet the service would be better.

most cheaper wheels are made in china, and i think someone the size and stature of BJ, would have found the best quality they could get for the price, rather than just finding what's cheap, popular and available.


Dunno, I put Bob Jane in the same basket as Pedders

User avatar
Red Dragon
Racing Driver
Posts: 766
Joined: Sun Jan 14, 2007 2:21 pm
Vehicle: NA6
Location: melbourne

Postby Red Dragon » Fri Jun 08, 2007 12:39 am

I put them on my NA but had Pirelli Dragons fitted for $15 corner extra
the wheels are ok

User avatar
pcmx5
Racing Driver
Posts: 1648
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: ND - 2
Location: Geelong Vic.
Contact:

Re:

Postby pcmx5 » Fri Jun 08, 2007 8:09 am

Adam_NAclubman wrote:
kula wrote:
.


Dunno, I put Bob Jane in the same basket as Pedders


I think that sterotyping is a bit dangerous. Bob Jane outlets are franchises and while they have service standards set by BJ they can differ.

Bj's in Geelong are fabulous;good prices and great service back up.

My mate pur C drives on his 5 and about a year later had a flat.Fixed, no charge"you bought the tyres of us".

Peter .
.Now ND2 Roadster prev NC2 Recaro's ,BBS wheels,full exhaust, Tiens NA 1.6.NA 1.8 LE(106RWKW)NC1,NC2.ND 1.5 .

User avatar
Grumpy
Fast Driver
Posts: 218
Joined: Tue Feb 13, 2007 9:17 pm
Vehicle: NC
Location: Melbourne

Postby Grumpy » Fri Jun 08, 2007 9:01 am

Have had no problems with BJ in Epping after having 3 cars worked on by them. Can't say the same for Beaurepairs in Somerton.
Sadly MX5 less for a while.
Rebuilding an 89 Honda CRX

Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:

Re:

Postby Adam_NAclubman » Fri Jun 08, 2007 4:10 pm

pcmx5 wrote:
Adam_NAclubman wrote:
kula wrote:
.


Dunno, I put Bob Jane in the same basket as Pedders


I think that sterotyping is a bit dangerous. Bob Jane outlets are franchises and while they have service standards set by BJ they can differ.

Bj's in Geelong are fabulous;good prices and great service back up.

My mate pur C drives on his 5 and about a year later had a flat.Fixed, no charge"you bought the tyres of us".

Peter .


Yeah but I know a couple of people that had T-Mart franchises that got bent over by head office. And the problem with these wheels is that head office and RJR are responsible for them... Same people that had AIR renovated and if they can't even redevelop their own multi-million dollar property properly so that rain water coming down through the new mounds doesn't destroy the track, then how much care have they put into making sure the wheels are strong, light and made to the correct tolerances? I'd sooner trust secondhand Japanese wheels

Jimi
Fast Driver
Posts: 155
Joined: Tue May 22, 2007 11:51 pm
Vehicle: NA6
Location: Sutho Shire, Sydney

Postby Jimi » Fri Jun 08, 2007 6:39 pm

thanks for the responses.

I guess I'm just toying with the idea that I can get a set of 15\" wheels and tyres for only a little bit more than a set of 14\" tyres for my stock rims.

I hear what you're saying about the quality of \"made in china\" wheels and tyres.

I actually went in to the local bob jane (taren point) to see both the wheels and tyres.

The wheels are not noticeably heavier than any of the other (more expensive) wheels they had on display, but I'm no engineer or metal urgist and don't know how they compare for strength. If they are heavier, we aren't talking much. (I was only able to compare 17\" wheels, because they are all that BJ keep for display)

The tyres are aparently \"rebadged\" Kumhos (as previously mentioned here), and are directional, and made with a medium-hard compound... so they will wear \"economically\". I assume this means they'll be pretty average on the track, but at least they'll be a slightly lower profile than the current tyres, so should afford better traction (due to less wall deflection whilst cornering) than my current balding bridgestones.

Also found out that they are almost totally out of stock, so there won't be too many swifts/lancers/whatevers running around with them on.

I'm very tempted to give them a go just to see what they are like, but something is holding me back... (It could be the voice of reason).
Red '89 Eunos Roadster, BD Rollover Bar, 1.8 engine conversion - Confucius say: Man beneath car with spanner is not necessarily mechanic!


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 233 guests