Greedy Rebic II

Boags · Postby **Boags** » Thu May 03, 2007 11:01 pm

Never even heard of it. Is it a piggy-back?

Sheck · Postby **Sheck** » Fri May 04, 2007 5:56 pm

I used to have one, its an extra injector controller.
Umm, cant remember wires fully but ther will be red: power, black: earth, green: rpm, yellow/orange: acc

Let me know if you want any other info, i might be able to scrounge around in my memories for some more!

Dave

Sheck · Postby **Sheck** » Sat May 05, 2007 4:45 pm

The one i had was a two part design, had the 'brain' box and the controler. The brains had a built in map sensor so i hooked that up to a vacume. The i just fiddled with the gain and cut-in settings for the injectors.
I didnt use a rising rate fuel regulator your stock one is enough, and the stock pump is enough too. I just T-ed into the fuel feed line (not return) and the pressure will be controlled by the stocko regulator.

Not sure how the later ones worked but i'd say they all have the boost input line cause it wont activate without it.

Hope that helps!!
Dave

Boags · Postby **Boags** » Tue May 08, 2007 6:30 pm

You can run 6 psi without front mount, but you have to run so little timing advance that it isn't a very fun or drivable 6PSI (nothing off boost at all).