NB speaker install, where would you put 4\" speakers?

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
sprx3
Fast Driver
Posts: 298
Joined: Sun Nov 19, 2006 9:47 pm
Vehicle: ND - 2 GT
Location: melbourne
Contact:

NB speaker install, where would you put 4\" speakers?

Postby sprx3 » Sun Apr 22, 2007 10:44 pm

hey guys as the tittle says, im doing my stereo install in the NB & need your opinion on where to put 4\" speakers....
I have 8\" woofers in the doors as well as the tweeters in the doors but am not sure where to put 4\" mids...
before you all say i dont need them, its part of an mbq set & makes the most amaizing sound when all are working together with the specially designed cross overs.. so where would you put them?
want to join the mazda car club of australia?, for more info please p.m me
Image

User avatar
broady
Racing Driver
Posts: 1243
Joined: Fri Jan 19, 2007 12:32 am
Vehicle: NA8
Location: Sydney NSW

Postby broady » Mon Apr 23, 2007 12:19 am

Ideally in the doors, however practically, in the headrests... although the sound from 4\" might become annoying there.

You might want to build a custom pod in the doors to house 8\" and 4\"

OR - put the 8\" behind you.

User avatar
Alex
Racing Driver
Posts: 1654
Joined: Thu Jan 04, 2007 6:54 am
Vehicle: NB8A
Location: Sydney

Postby Alex » Mon Apr 23, 2007 10:49 pm

for the 4\" the sound would be directional since they would be handling mid-high range so I would want place them infront of the seats so maybe some custom pods for the car interior footwells or just under the front of the seats
Image
Red NB8A - BD rollbar - Hardtop

User avatar
sprx3
Fast Driver
Posts: 298
Joined: Sun Nov 19, 2006 9:47 pm
Vehicle: ND - 2 GT
Location: melbourne
Contact:

Postby sprx3 » Mon Apr 23, 2007 11:16 pm

hey guys, i mad a custom pod up today that holds both the 4\" speakers & will be putting it in the net of the wind breaker, i'll let you know how it sounds when its all hooked up :)
want to join the mazda car club of australia?, for more info please p.m me
Image

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Postby Okibi » Tue Apr 24, 2007 1:48 am

I use to have a custom \"parcel shelf\" with two 8\" 3 ways in there.

They did a good job.

Image

Image
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
marcusus
Speed Racer
Posts: 2919
Joined: Thu Jul 13, 2006 12:07 am
Vehicle: NB8A

Postby marcusus » Tue Apr 24, 2007 9:41 pm

I'm sure I've asked this before, but did that job involve cutting into the metal Okibi? Or did you build a bit of wood or something to fit over the rear parecel tray to house the speakers?

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Postby Okibi » Wed Apr 25, 2007 1:19 am

Both,

Cut metal (to fit the speaker magnets) and raised the height of the parcel shelf near the seats a few cm.
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
sabretooth
Speed Racer
Posts: 2119
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NA8 - Turbo

Postby sabretooth » Wed Apr 25, 2007 2:05 am

It's not structural metal though.

User avatar
marcusus
Speed Racer
Posts: 2919
Joined: Thu Jul 13, 2006 12:07 am
Vehicle: NB8A

Re:

Postby marcusus » Wed Apr 25, 2007 12:19 pm

sabretooth wrote:It's not structural metal though.

Was wondering about that. I thought it was quite structural? It looked it, but I didn't really look in too much detail.

Where exactly is the structural metal if that's not it? And if that isn't the structural metal, what is it? Essentially a fuel tank cover?

User avatar
sabretooth
Speed Racer
Posts: 2119
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NA8 - Turbo

Postby sabretooth » Wed Apr 25, 2007 12:32 pm

The metal he cut into is part of an aluminium sheet - normally it covers where you see in this pic - it gives the rear some structure for the carpet. It's been removed in the following photo:

Image

User avatar
marcusus
Speed Racer
Posts: 2919
Joined: Thu Jul 13, 2006 12:07 am
Vehicle: NB8A

Postby marcusus » Wed Apr 25, 2007 1:00 pm

Ahh, so that's how that bit of metal sits on the back shelf. Didn't realise there were two side channels that it sits on. In that case, it's not very structural at all.

Hmmm... getting tempted to rip mine out and stick my 6x9's in there now :twisted:

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Postby Okibi » Wed Apr 25, 2007 1:33 pm

I had 6x9's in there first :oops: I wanted more punch.

I saw the new Pioneer Subwoofers on the weekend, they look perfect for someone who doesn't need the seat all the way back.

Product nunbers are:
TS-SW1041D (8.3cm deep) RRP $269.00
TS-SW1241D (8.3cm deep) RRP $299.00

You *might* be able to squeeze one into a custom shelf and still let the roof sit properly, trick is only raising the height of the shelf near the seats and not towards the back of the car.
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
sabretooth
Speed Racer
Posts: 2119
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NA8 - Turbo

Postby sabretooth » Wed Apr 25, 2007 1:37 pm

I figreglassed a box and installed it in there. :)

User avatar
marcusus
Speed Racer
Posts: 2919
Joined: Thu Jul 13, 2006 12:07 am
Vehicle: NB8A

Postby marcusus » Wed Apr 25, 2007 1:41 pm

I've got a 12\" Rockford Fosgate in the boot, so I have plenty of punch right now :P
(Minor pun there too, since it's actually a \"punch\" model RF :P )
Right now I want to get my 6x9's (which are currently sitting in the boot) firing into the cabin to get more mid in there. I really can't hear them all that well at the moment.

Might think about how to do an even crazier custom install for the sub, but that can wait. 6x9's first.

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Postby Okibi » Wed Apr 25, 2007 1:45 pm

Ok, perhaps the best solution is to cut some holes in the metal shelf to let the bass from the boot enter the rest of the car.
If you had access to a car like this, would you take it back right away? Neither would I.


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 3 guests