Turbo Manifold Question for NA8 and NB8

Bevan · Postby **Bevan** » Wed Apr 04, 2007 2:51 pm

Hi Guys,
Is the bolt pattern and port positioning on the block for an exhaust manifold the same for an NA8 and an NB8B?

Cheers,
Bevan

Bevan · Postby **Bevan** » Wed Apr 04, 2007 4:08 pm

I've done alot of searching on miata.net and miataturbo and it seems it is a straight fit.

The only thing that has a question mark on it is does the EGR return pipe need to be fitted on a turbo application?

Garry · Postby **Garry** » Thu Apr 05, 2007 10:00 am

Legally, probablly to pass emissions unless you have a good tuner, but illegally, no. The EGR return pipe breaks off most SP's so a few guys have ditched it. The car still runs fine without it.

Just for the record, I still have my EGR pipe attached. Though I've had 4 replaced due to breakages.

Turbo exhaust manifolds??????? Whats going on here Bevan? Have you been converted to the dark side???????

sabretooth · Postby **sabretooth** » Thu Apr 05, 2007 12:33 pm

OK Bevan, clearly there are some beans here which require spilling.

Boags · Postby **Boags** » Thu Apr 05, 2007 12:36 pm

sabretooth wrote:OK Bevan, clearly there are some beans here which require spilling.

DO IT DO IT DO IT! :mrgreen:

Bevan · Postby **Bevan** » Thu Apr 05, 2007 1:11 pm

LOL, you guys are funny. Just the mention of turbo and half the people on here cream themselves. Love It! :lol:

I'm in 2 minds about whether to start picking up parts for a turbo install (actually, 1 and 3/4 mind to do it and 1/4 not too) so just getting a guage on what is needed for the manifold at the moment as it's the hardest thing to get. I'm in no hurry and would prob take 12-18 months to get all the bits and peices. I wouldn't be able to spend $3000 in one hit, but getting bits here and won't hurt the bank balance at all.

The Dark side is strong in this one. :twisted:

PS. I realise an SP is the best option but it's too expensive. They're still at the $30k mark, and my car is prob only worth $20-21k so 10grand is far too big a difference to contemplate that, especially when DIY is about 80% cheaper.

Boags · Postby **Boags** » Thu Apr 05, 2007 1:14 pm

Noice work Beverly!

Garry · Postby **Garry** » Thu Apr 05, 2007 1:30 pm

Put the 1/4 mind in the bin and follow the 1 3/4. You know you wanna :evil:

mmmmmmmmmmmm boost

sabretooth · Postby **sabretooth** » Thu Apr 05, 2007 5:12 pm

Turboing. It's the new black!

Fuzzlet · Postby **Fuzzlet** » Thu Apr 05, 2007 6:27 pm

My car is an NA8 and uses the manifold and dump pipe off an SP. The turbo on the SP is mounted low, which then makes it possible to use the mania CAI like I have done...only problem was the cost, about $1600 all up. A lot pricier than other brands, but quality is better aswel