quick release steer hubs

Anything to do with the MX5 and Motor Sport

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:
Contact irwin83r

quick release steer hubs

Postby irwin83r » Mon Mar 19, 2007 5:56 pm

not sure if i should ask here or in another section.

but i was wondering if anyone has used a quick release steering hub before on the track and or road?


reason im asking is id really really like to run a smaller diameter wheel to get a bit more room when racing but as the car is a NB and has an air bag standard i cant change the wheel legaly on the road. so what im wondering is can i run a smaller.. none standard wheel on the track?? and also would this be possible with a quick release hub? or are they not road legal??

cheers

irwin
Top
User avatar
bigdog
King of the kennel
Posts: 2233
Joined: Wed May 25, 2005 3:07 pm
Vehicle: NB SP
Location: Blue Mountains
Contact:
Contact bigdog

Postby bigdog » Mon Mar 19, 2007 9:54 pm

Quick release hub will not mate to the NB wheel so no real advantage there, and if you're putting a smaller wheel on you don't need to remove it to get in and out, so no advantage there either. And any mod to the steering column on an NB would be 'engineer' territory... Short answer - don't do it. :D
Image
Marvin - '02 Silver SP - BD, PSS9, Guru, Build #62 Cardomain
Top
kula
Racing Driver
Posts: 664
Joined: Sun Jul 10, 2005 6:08 pm
Vehicle: NC
Location: Sydney
Contact:
Contact kula

Postby kula » Mon Mar 19, 2007 10:24 pm

about the only decent QR hub is a works bell, they are about $650.
you have to get rid of the airbag system to use it.

there isnt an interchangable one that i know of which allows the use of airbags.
Top
User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:
Contact irwin83r

Postby irwin83r » Wed Mar 21, 2007 11:47 pm

damn...

well... next question.. can i get the standard wheel retrimed and made smaller??
Top
kula
Racing Driver
Posts: 664
Joined: Sun Jul 10, 2005 6:08 pm
Vehicle: NC
Location: Sydney
Contact:
Contact kula

Postby kula » Thu Mar 22, 2007 9:03 am

doubt it.. but it might be possible.

id maybe look at smaller airbag wheels from other manufacturers,
try an evo wheel?
Top
User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:
Contact irwin83r

Re:

Postby irwin83r » Thu Mar 22, 2007 7:42 pm

kula wrote:doubt it.. but it might be possible.

id maybe look at smaller airbag wheels from other manufacturers,
try an evo wheel?


ahh never thought of that..

will look into both
Top
Post Reply

Return to “MX5 Motor Sport”

Who is online

Users browsing this forum: No registered users and 100 guests