New Seat Covers Installed

[maxfromaus]

Yes I would before covers that DONT slip over the stock ones.
That way they should fit a lot better.

These covers are definately NOT slip on, but proffessional upholstery. All attached to the seat frame to achieve the tight fit, as per photos.

Also can you sew a pocket into the back of the seats (like the stock seats)?

If there is pocket in the factory covers, then no problems. It will be the exact copy of the stock style.

If they're leather, i'm guessing thicker bits on the bolsters (because thats where they wear through) and perforated in the middle?

Material will have padding behind to further reduce any rubbing. Normally rubbing is not an issue, unless you purposely try to damage it, or something sharp sticking out of you.
I have my seat covers over 3 years now, still like the first day, no rubbing at all, still very tight, no cracking, no fading.

I'd be happy with all black with red baseball stitching or dark gray center sections like OEM.
The red and black are a little too "LOOK AT ME" for my liking and I wouldn't need any logos done

Logo is one of the customisable attributes. I can certainly organise no logo.

[Okibi]

Sounds Great

[maxfromaus]

They look fantastic!!!

*runs off to consult the boss*

Check out BE20357 on the colour chart, will be a great match to your beloved mx5

[Alex]

incase anyone doesn't have a colour chart here is one
http://www.aus300zx.com/forum/showthread.php?t=257515
edit:
pic of it
BE20357

[irwin83r]

im keen for NB8A also.

[kitkat]

Cheers SM

Thats a beautiful blue!


*starts saving penies*

[maxfromaus]

could you please confirm if stock nb8a seat covers glued to the seat foam or not?
Thanks
Max Ungun

[veecee]

Yes I would before covers that DONT slip over the stock ones.

That way they should fit a lot better.

Also can you sew a pocket into the back of the seats (like the stock seats)?

If they're leather, i'm guessing thicker bits on the bolsters (because thats where they wear through) and perforated in the middle?

I'd be happy with all black with red baseball stitching or dark gray center sections like OEM.

The red and black are a little too "LOOK AT ME" for my liking and I wouldn't need any logos done

Totally with Okibi in terms of colour and finish for my NB8A.

[RG.net]

would be BG10313 (creamy white) on the inside, logo and BK0010 (black) on the outside for me with RD7886 stitching (pink), is it possible to have 3 diffrent colours?

[maxfromaus]

would be BG10313 (creamy white) on the inside, logo and BK0010 (black) on the outside for me with RD7886 stitching (pink), is it possible to have 3 diffrent colours?

no problems,

Any colour for Logo
Any colour for stitching
Max of 2 colours for seat, which is inner/outer

I still need confirmation if standard seat covers are glued

[irwin83r]

could you please confirm if stock nb8a seat covers glued to the seat foam or not?
Thanks
Max Ungun

think they might be you know just going off the top of my head....

anyone done the foam removal for extra head room thing might know for sure.

i know the center pieces arent but i think the sides might be

[RG.net]

Max of 2 colours for seat, which is inner/outer

tragic ! no fancy stitching for the NB seats then i guess

[kitkat]

Max of 2 colours for seat, which is inner/outer

tragic ! no fancy stitching for the NB seats then i guess

If i read it correctly you CAN have fancy stitching... 2 colours is for the iner & and outer of the seat... so in the pic on the first page the 2 colours are red and black

[maxfromaus]

no need for any confusion guys,

you can have fancy logo,
you can have fancy stitching,
you can have fancy seat covers

[Lucky_Luke]

They look really tidy!

I'm interested too!
my dad's been looking for similar covers for ages.

Can you PM me the details too