Dodgy day help required!! Melbourne

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

mossy
Fast Driver
Posts: 320
Joined: Wed Jan 07, 2004 4:53 pm
Vehicle: NC
Location: melbourne

Dodgy day help required!! Melbourne

Postby mossy » Mon Feb 05, 2007 2:41 pm

I'm finishing off my drivetrain swap this Sat or Sun, so far I've replaced the diff and taken out the old gearbox and clutch(by myself, that was fun)
now I need some help with putting in the new clutch and bolting up the 6 speed, any takers, BEER AND PIZZA PROVIDED!! 8)

User avatar
fastfreddygassit
Waitin' for a mate
Posts: 1773
Joined: Sat Jun 25, 2005 8:00 pm
Vehicle: NB SE
Location: Waitin' for a mate in Melbourne somewhere
Contact:

Re: Dodgy day help required!! Melbourne

Postby fastfreddygassit » Mon Feb 05, 2007 3:32 pm

mossy wrote:I'm finishing off my drivetrain swap this Sat or Sun, so far I've replaced the diff and taken out the old gearbox and clutch(by myself, that was fun)
now I need some help with putting in the new clutch and bolting up the 6 speed, any takers, BEER AND PIZZA PROVIDED!! 8)

Maybe.
It is dependent on which suburb you are in?
If you're close by (30 minutes) then I'd rock on over for a couple of hours and give you a hand.
Lining up clutch/gearbox can be an arsy job by yourself. Especially if you're only using jack stands... :shock: :shock:
If you have a hoist or a pit then its all smiles
:mrgreen:

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Mon Feb 05, 2007 3:35 pm

he's in templestowe.

i should be able to help, i just need to check with the missus to see if she has any plans for me this weekend.

User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Postby green_comet » Mon Feb 05, 2007 3:48 pm

Ill be in eltham on sunday, soo i might be able to come past for a while..

User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Postby Andrew » Mon Feb 05, 2007 7:09 pm

May be able to leand a hand also....depending which state i'm in at the time (vic or nsw that is)

mossy
Fast Driver
Posts: 320
Joined: Wed Jan 07, 2004 4:53 pm
Vehicle: NC
Location: melbourne

Postby mossy » Mon Feb 05, 2007 7:25 pm

Lookin good, just waiting on a call from mania tomorrow to make sure I can get my clutch then its all systems go!!

mossy
Fast Driver
Posts: 320
Joined: Wed Jan 07, 2004 4:53 pm
Vehicle: NC
Location: melbourne

Postby mossy » Tue Feb 06, 2007 4:50 pm

Clutch is on its way, should be here tomorrow!

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Re:

Postby Boags » Tue Feb 06, 2007 6:24 pm

Andrew wrote:May be able to leand a hand also....depending which state i'm in at the time (drunk or high that is)


Fixed for you Andrew! :lol:

Make sure you have someone to push the back of the engine down for you! :mrgreen:

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au

User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Re:

Postby Andrew » Tue Feb 06, 2007 8:34 pm

Boags'MX5 wrote:
Andrew wrote:May be able to lend a hand also....depending which state i'm in at the time (drunk or high that is)


Fixed for you Andrew! :lol:

Make sure you have someone to push the back of the engine down for you! :mrgreen:

Boags


ta mate...... :P 8)

User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Postby green_comet » Tue Feb 06, 2007 9:27 pm

Andrew, im soo getting you to take a few nice snaps of my car, if you there on sunday... :mrgreen:

pretty pleeeease... :)

User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Re:

Postby Andrew » Tue Feb 06, 2007 9:37 pm

green_comet wrote:Andrew, im soo getting you to take a few nice snaps of my car, if you there on sunday... :mrgreen:

pretty pleeeease... :)


I bring my camer or some tools...cant fit both in the boot :oops:

User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Postby green_comet » Tue Feb 06, 2007 9:48 pm

ok no worries, bring some tools then.... they will be more important.

Although FastFreddy is a big enough tool, we might just need him... lol :P :mrgreen:

User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Re:

Postby Andrew » Tue Feb 06, 2007 10:09 pm

green_comet wrote:ok no worries, bring some tools then.... they will be more important.

Although FastFreddy is a big enough tool, we might just need him... lol :P :mrgreen:


Lucky Fig's not coming as well :P

Will see what i can do to squish it all in.......need to wash the car before then as well :oops:

User avatar
fastfreddygassit
Waitin' for a mate
Posts: 1773
Joined: Sat Jun 25, 2005 8:00 pm
Vehicle: NB SE
Location: Waitin' for a mate in Melbourne somewhere
Contact:

Re:

Postby fastfreddygassit » Tue Feb 06, 2007 10:42 pm

green_comet wrote:Although FastFreddy is a big enough tool, we might just need him... lol :P :mrgreen:


OI!
:mrgreen:
and here I foolishly thought you'd want to take my car for a spin to see how it goes...
with the Mania CAI, X-Force extractors and free flowing exhaust, and tighe cams...
tool indeed...you cheeky, cheeky boy.
:mrgreen: :mrgreen:

User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Re:

Postby Andrew » Tue Feb 06, 2007 10:46 pm

fastfreddygassit wrote:
green_comet wrote:Although FastFreddy is a big enough tool, we might just need him... lol :P :mrgreen:


OI!
:mrgreen:
and here I foolishly thought you'd want to take my car for a spin to see how it goes...
with the Mania CAI, X-Force extractors and free flowing exhaust, and tighe cams...
tool indeed...you cheeky, cheeky boy.
:mrgreen: :mrgreen:


pffft it's black....red goes faster :mrgreen:


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 3 guests