Sway Bars for 1999 NB Turbo

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
Forced Fives
Driver
Posts: 82
Joined: Tue Nov 29, 2005 3:28 pm
Vehicle: 10AE - Turbo
Location: Sydney

Sway Bars for 1999 NB Turbo

Postby Forced Fives » Tue Jan 30, 2007 2:47 pm

Hi all,

Just after a little advice from those who have fitted aftermarket sway bars to thir cars. I have a 1999 10AE turbo which does bits an pirces on the track and probably about 4000km per year on the road. The car runs Azenis 651's (215/40 x 17) and lowered springs.

Any suggestions?

Thanks
10AE Turbo

User avatar
Woo
Fast Driver
Posts: 359
Joined: Tue Oct 12, 2004 12:43 am
Vehicle: 10AE - Turbo
Location: OES Melbourne
Contact:

Postby Woo » Tue Jan 30, 2007 6:21 pm

I'm very happy with Racingbeat, a tad exy but well worth the $$$$.
It's also worth investing in the rear subbrace and the extra front bar mounts if your doing track work imo
Very slightly modified 10AE #2562 ..... one of 149 in Australia :wink:
Race what you brung ..... And hope you brung enough

mossy
Fast Driver
Posts: 320
Joined: Wed Jan 07, 2004 4:53 pm
Vehicle: NC
Location: melbourne

Postby mossy » Tue Jan 30, 2007 8:21 pm

I just got my RB tubular front bar and endlinks today, tasty!!!

Slugoid

Postby Slugoid » Wed Jan 31, 2007 4:08 pm

I have adjustable Whitelines front and rear for my NA6 and they have been great. Adjustable are good for setting the front/rear bias to suit your driving.

They are relatively priced, well made but a tad heavy. I don't see much difference between Whiteline or Racing Beat unless you're talking about the tubular ones, which are much lighter.

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Re:

Postby Okibi » Wed Jan 31, 2007 6:54 pm

Woo wrote:I'm very happy with Racingbeat, a tad exy but well worth the $$$$.
It's also worth investing in the rear subbrace and the extra front bar mounts if your doing track work imo


same
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Postby Benny » Thu Feb 01, 2007 4:45 pm

Be careful that the rear bar is not going to be too stiff.
While a stiff rear bar feels OK on the street, on the track it can make the car VERY tailhappy.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

User avatar
zoomzoom
Racing Driver
Posts: 891
Joined: Wed Oct 25, 2006 7:59 pm
Vehicle: NA6 - Turbo
Location: Brisbane

Postby zoomzoom » Thu Feb 01, 2007 7:59 pm

i've gotta say I am very happy with my adjustable whitelines on my 90 na6, you can set them full soft and it still feels firmer than std but good for comfy street driving and then you can move the link to make it feel very tight like a gokart.

Basically the only differences with different swaybars are:
diameter
distance from corner to the link
and if it is solid or tubular

User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Postby green_comet » Fri Feb 02, 2007 11:11 am

if your going to put adjustable swaybars in, make sure you get yourself some adjustable endlinks.. well worth the extra cash..

User avatar
Forced Fives
Driver
Posts: 82
Joined: Tue Nov 29, 2005 3:28 pm
Vehicle: 10AE - Turbo
Location: Sydney

Postby Forced Fives » Mon Feb 05, 2007 4:13 pm

Thanks for the advice everyone. Appreciated.
10AE Turbo

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Postby Charlie Brown » Mon Feb 05, 2007 9:00 pm

So Verne, now you have your sways are you coming to Wakefield :?:
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: Bing [Bot] and 209 guests