Wiring to the ECU

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

Post Reply
User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:
Contact Boags

Wiring to the ECU

Postby Boags » Sun Jan 28, 2007 11:12 am

Hi all,

Can anyone tell me which wire into the ECU is the tac signal? My emanage is showing 0RPM at all times, and the connection I have with the wire is good... :? Wrong wire methinks. Any info would be appreciated!!

Thanks,

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au
Top
Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Sun Jan 28, 2007 11:57 am

tach from cas is white wire, pin 24 on the ob37 connector
the 2nd tach from the cas is the yellow wire, pin 25.

at least that's what the pinout readout i have says.
Top
Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Sun Jan 28, 2007 12:19 pm

also mate, if you can't figure it out but know which wire it is in the engine bay (the one at the back of the cas, duh), there is an easy way to confirm where that wire ends up in the ecu harness. have a look at the 3rd and 4th pic in this thread to see how i did it when i was installing my o2 meter. you'll just need a multimeter, a couple of alligator clips and some pins.
Top
Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Sun Jan 28, 2007 1:09 pm

:shock: :shock: :oops: :oops:

sorry i have a bunch of different wiring diagrams saved on my computer -shoulda been more careful.

yep that madracki one that you linked to steve, that's the one i used.
Top
User avatar
sabretooth
Speed Racer
Posts: 2119
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NA8 - Turbo

Postby sabretooth » Mon Jan 29, 2007 9:27 pm

So apparently I'm meant to post something, Boags? I can't for the life of me remember what! :)

Also, if you need a schematic for a tach driver, I have one which I used to drive the gauge tach in the instrument cluster - I use it on the Haltech to monitor RPMs.
Top
Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Postby Fatty » Mon Jan 29, 2007 9:41 pm

you're supposed to post some pictures in this thread
http://www.aus-cartalk.com/viewtopic.php?t=23424
Top
User avatar
sabretooth
Speed Racer
Posts: 2119
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NA8 - Turbo

Postby sabretooth » Tue Feb 06, 2007 11:49 pm

Did you ever find the right wire?

Black with white stripe on my 94.. possibly the same for yours.
Top
User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:
Contact Boags

Re:

Postby Boags » Wed Feb 07, 2007 12:17 pm

sabretooth wrote:Did you ever find the right wire?

Black with white stripe on my 94.. possibly the same for yours.


I'm going to study UA's wiring to figure out what the problem is... Just have to find time. :frown:

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 1 guest