ECU Plug - Plug in and Play ????????????

[tasroadster]

Doe anyone know were you can purchase or obtain a ECU Electrical Plug
which will fit directly into to existing (std) ECU wiring harness Plug/Connector? (For a 1990 NA6)

Basically I am attempting to make a small short loom that will plug straight into an ECU and the Stock ECU wiring harness plug without having to cut into the std loom. Kind of.......my own \"Plugin & Play\" setup.


So.............I just need a Plug that will fit directly????

Thanks for your help.

Regards

[rjr666]

as far as i know, you will have to buy or gut your old ecu, to unsolder the connections, as mazda dont sell me seperatly.

[Fatty]

http://www.boomslang.us/extension.htm

pick \"90-95 mazda miata\" from the list.

this should be what you need, i think?

[Russellb]

this is the one I used on my Plug and Play adaptor
http://www.flyinmiata.com/index.php?deptid=4527&parentid=0&stocknumber=07-16910

[timk]

http://www.boomslang.us/extension.htm

pick "90-95 mazda miata" from the list.

this should be what you need, i think?

You can also e-mail him and buy just the connector for ~US$20.