Saw this pic in another thread and my car has the same problem. Is there a procedure to raise them up to the bonnet level?
Droopy Eyes
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
GP
- Racing Driver
- Posts: 1025
- Joined: Tue Nov 21, 2006 10:42 am
- Vehicle: ND - 2 GT
- Location: Brisbane
Droopy Eyes
Hi All
Saw this pic in another thread and my car has the same problem. Is there a procedure to raise them up to the bonnet level?
Saw this pic in another thread and my car has the same problem. Is there a procedure to raise them up to the bonnet level?
Graham
-
davamb
- Fast Driver
- Posts: 230
- Joined: Sun Jan 22, 2006 9:00 am
- Vehicle: NA6
- Location: Close to PI
Yep, sure is GP,
Raise the lights using the centre console switch.
Remove the black plastic surround from the lights.
You will now find 4 philips-head screws that attach the light cover to the rest of the light structure.
Loosen these just enough so's you can move the cover up and down.
Now lower the lights and use a suitable tool to adjust the heights. I used a piece of coathanger wire that I'd bent the end over to make a 5mm lip, but you could use just about anything that comes to hand.
When satisfied, raise the lamps, tighten the screws and replace the plastic covers.
I had a bit of trouble with mine as some moron had had a go at it in the past and damaged 2 of the screws (grr!). I had to use an angle grinder to take the heads off the screws and then replace them. I used stainless M5 allen-headed socket screws to replace the old ones.
Raise the lights using the centre console switch.
Remove the black plastic surround from the lights.
You will now find 4 philips-head screws that attach the light cover to the rest of the light structure.
Loosen these just enough so's you can move the cover up and down.
Now lower the lights and use a suitable tool to adjust the heights. I used a piece of coathanger wire that I'd bent the end over to make a 5mm lip, but you could use just about anything that comes to hand.
When satisfied, raise the lamps, tighten the screws and replace the plastic covers.
I had a bit of trouble with mine as some moron had had a go at it in the past and damaged 2 of the screws (grr!). I had to use an angle grinder to take the heads off the screws and then replace them. I used stainless M5 allen-headed socket screws to replace the old ones.
Cheers, Dave, 1990 NA6
Via est vita.
Via est vita.
-
Philip Lee
- Racing Driver
- Posts: 521
- Joined: Tue Sep 23, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Brisbane
- Contact:
-
Andy Wana
- Fast Driver
- Posts: 362
- Joined: Tue Sep 26, 2006 11:16 pm
- Vehicle: ND - 2 GT
- Location: Sydney, Australia
Re: Droopy Eyes
GP wrote:Hi All
Saw this pic in another thread and my car has the same problem. Is there a procedure to raise them up to the bonnet level?
My car is not a problem car
Anyway, I'll get those droopy eyes fixed into bedroom eyes soon
Been wondering whether there's anything I can do to make the lights align
I ♥ asymmetry
-
Astroboysoup
- Racing Driver
- Posts: 825
- Joined: Thu Jun 10, 2004 1:06 am
- Vehicle: ND - 2 GT
- Location: Adelaide, Australia
- Contact:
-
jules
- Guitar Hero
- Posts: 3562
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Sydney, previously HQ - GC Dodgy Inc.
- Contact:
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: Google [Bot] and 1 guest
