It's a little hard to explain
Tightening roof connection?
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
maxwolfie
- Racing Driver
- Posts: 867
- Joined: Mon Jan 24, 2005 6:22 pm
- Vehicle: ND - 2 GT
- Location: Western Sydney, NSW
- Contact:
Tightening roof connection?
Is there a way to \"tighten\" down the roof on the NA6, basically the connection points between the roof and the windscreen are starting to rattle against each other pretty bad on the drivers side. the \"clamp\" on the roof itself is screwed in tight to the roof frame, and the \"catcher\" on the windscreen is also tight
It's a little hard to explain
It's a little hard to explain
'89 JDM NA6 (black)
2" s/s ex., 4-2-1 extractors, high flow cat, RX-7 AFM + pod, lightened fly, h/d clutch, 2 way lsd, slotted rtrs, Racing beat type II front bar, Speedy 17" wheels
2" s/s ex., 4-2-1 extractors, high flow cat, RX-7 AFM + pod, lightened fly, h/d clutch, 2 way lsd, slotted rtrs, Racing beat type II front bar, Speedy 17" wheels
-
STV
- Fast Driver
- Posts: 269
- Joined: Fri Oct 21, 2005 8:38 pm
- Vehicle: ND - 2
Wolfie, you can adjust the level of torque the clamps are giving out... if thats what your asking...
All that you need to do is (with the clamp open) flip forward a little cover plate over a long hexagonal bolt, then,
wind the bolt to a point where it clamps more firmly, but not so tight that you cant close it.
its a pretty simple adjustment but it might take a few attempts to get it right.
Sorry, i cant post pics or i would show you.
STV
All that you need to do is (with the clamp open) flip forward a little cover plate over a long hexagonal bolt, then,
wind the bolt to a point where it clamps more firmly, but not so tight that you cant close it.
its a pretty simple adjustment but it might take a few attempts to get it right.
Sorry, i cant post pics or i would show you.
STV
Where is 'Home Sweet Home'?
-
Garry
- Speed Racer
- Posts: 3481
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: NB SP
- Location: God's Country
- Contact:
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 8 guests
