Dodgy day Sat 18th November is on

JBT · Postby **JBT** » Thu Nov 16, 2006 10:22 am

So what's everyone smokin' :?:

sabretooth · Postby **sabretooth** » Thu Nov 16, 2006 10:28 am

Not sure - but I think I'll be giving this DD a miss - everyone's trying to cram stuff into this and next weekend - it's crazy.

jules · Postby **jules** » Thu Nov 16, 2006 12:33 pm

AJ wrote:i did??? ...........oh OK............

Yes you did, you dirty enumerator.

Jules

jules · Postby **jules** » Thu Nov 16, 2006 1:12 pm

Hey, don't be like that Tooth :cry:

It's a \"social\" event afterall.

Jules

sabretooth · Postby **sabretooth** » Thu Nov 16, 2006 8:19 pm

I know, but I've got a LAN and a party on that night.

Is there much of a chance the day will stretch over onto the 19th?

kitkat · Postby **kitkat** » Thu Nov 16, 2006 8:22 pm

sabretooth wrote:I know, but I've got a LAN and a party on that night.

Is there much of a chance the day will stretch over onto the 19th?

http://www.aus-cartalk.com/viewtopic.php?t=21309

So we going to swap red5's engine so she can come to the cruise on sunday?

OMY005 · Postby **OMY005** » Thu Nov 16, 2006 10:46 pm

sabretooth wrote:Is there much of a chance the day will stretch over onto the 19th?

I intend to get some of the work out of the way on Friday afternoon/evening. If anybody is out that way feel free to drop in. Last time at UA's we managed to get the gearbox out even before the real dodgy day had begun.

So I think if we look mainly at getting the swap done it will be completed on the day.

Andrew.

Boags · Postby **Boags** » Thu Nov 16, 2006 10:51 pm

Andrew, I currently have a roof in my Feroza, if you like i'll give you guys a hand and drop it off tomorrow night.

About what time? email or pm will be fine for contacting me tomorrow.

gmarsh at hotkey dot net dot au

Boags

99MXV · Postby **99MXV** » Fri Nov 17, 2006 3:10 pm

Wingzzzz are clipped, chopped and prepared... 7 kilos worth.

Sauce is packed..

We need OIL, Dipping containers, NAPKINS (heaps of them) and Jules and I will see you all at 9.30

Wingzzzzzzzz start at 12.

Cheers

Wayne

OMY005 · Postby **OMY005** » Sat Nov 18, 2006 12:23 am

Well, JBT, Red5 and myself started early and spent a few hours tonight getting the motor ready to come out. Should be a good day.

Some of the dodgyness that happened tonight below, those bolts can be tight. :shock:

Andrew.

kitkat · Postby **kitkat** » Sat Nov 18, 2006 12:38 am

geez, nice work with the socket.

We'll be there about 11am... See yaz then :mrgreen:

SPy vs. SPy · Postby **SPy vs. SPy** » Sat Nov 18, 2006 12:46 am

crivens..... whose knuckles were on the end of that :shock:

Oh! and guys it's a bit of a secret BUUUUTTTT, out = anti clockwise OK :lol:

JBT · Postby **JBT** » Sat Nov 18, 2006 5:40 am

whose knuckles were on the end of that

Luckily it was a rattle gun. Someone should have told the guys who built the car that the bell housing bolts didn't need to be torqued to 200,000 ft/lbs :shock:

99MXV · Postby **99MXV** » Sat Nov 18, 2006 8:00 am

JBT wrote:
whose knuckles were on the end of that

Luckily it was a rattle gun. Someone should have told the guys who built the car that the bell housing bolts didn't need to be torqued to 200,000 ft/lbs

Now your just exaggerating JBT !

Its 7am on Dodgy Day and I'm Excited !

MonSqueek · Postby **MonSqueek** » Sat Nov 18, 2006 11:36 am

99MXV wrote:
JBT wrote:
whose knuckles were on the end of that

Luckily it was a rattle gun. Someone should have told the guys who built the car that the bell housing bolts didn't need to be torqued to 200,000 ft/lbs

Now your just exaggerating JBT !

Its 7am on Dodgy Day and I'm Excited !

Must be nearly time for Wingzzzzzzzzz and Im stuck at work, in the freezing cold and jealous as hell! Have fun guys and I want pics !