Dodgy day Sat 18th November is on

National, State and Local events, Club or Informal runs

Moderators: timk, Stu, zombie, Andrew, -alex, miata, AJ

Post Reply
OMY005
Racing Driver
Posts: 502
Joined: Fri Mar 04, 2005 9:26 pm
Vehicle: ND - 2 GT
Location: Brisbane, Australia

Dodgy day Sat 18th November is on

Postby OMY005 » Sun Nov 12, 2006 5:18 pm

Its back on again. 8)

Red5 is in need of a engine swap and some others have expressed other forms of dodgyness they want to perform.

I don't know if it will be as well organised as UA's though as he has set a very high standard to equal from the previous two events. I don't have a BBQ there. Anybody able to bring one? I have one largish esky for ice and drinks.

Anyone who is keen to come please express you interest here and what type of dodgyness if any you want to perform. So I know how many to expect on the day.

PM me for the address if you are coming.

Andrew. :)
Previously, White 95 NA 1.8 Hard Top,Stock standard
Now, 2016 Fiat 500x, 2014 Fiat 500, 2015 ND GT 2.0
Top
User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:
Contact jules

Postby jules » Sun Nov 12, 2006 5:25 pm

I'll be doing box, diff, clutch and brake fluid changes.

I will be bringing \"The Shelley\" and his knob.


Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image
Top
User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:
Contact jules

Postby jules » Sun Nov 12, 2006 5:27 pm

PS: If anyone knows the sizes of the 2 diff nuts and gearbox nuts, that would be great. The diff looks like about 22 and 24mm?

Oh, and has anyone got a cheap oil pump thingy to insert the oil into the box and diff?

Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image
Top
User avatar
kitkat
Racing Driver
Posts: 1244
Joined: Sun Nov 13, 2005 9:23 pm
Vehicle: ND - 2 GT
Location: Gold Coast

Re:

Postby kitkat » Sun Nov 12, 2006 5:32 pm

jules wrote:PS: If anyone knows the sizes of the 2 diff nuts and gearbox nuts, that would be great. The diff looks like about 22 and 24mm?

Im pretty sure i have the sockets for the diff nuts.

We shall be there aswell... will there be wings on the menu? (if so ill bring the fryer)
Top
OMY005
Racing Driver
Posts: 502
Joined: Fri Mar 04, 2005 9:26 pm
Vehicle: ND - 2 GT
Location: Brisbane, Australia

Re:

Postby OMY005 » Sun Nov 12, 2006 5:42 pm

jules wrote:Oh, and has anyone got a cheap oil pump thingy to insert the oil into the box and diff?


I've got one of those there.

Andrew. :)
Previously, White 95 NA 1.8 Hard Top,Stock standard
Now, 2016 Fiat 500x, 2014 Fiat 500, 2015 ND GT 2.0
Top
User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:
Contact Boags

Postby Boags » Sun Nov 12, 2006 6:56 pm

I'm leaking a bit of oil, so I want to replace all the seals. Can you let me know what the part numbers are for those Andrew (if they are the same on an NA8 :? )

So yes, i'll be there with bells on! 8) *I may be lying about the bells*

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au
Top
SPy vs. SPy
Racing Driver
Posts: 902
Joined: Wed Mar 10, 2004 7:40 pm
Vehicle: ND - 2
Location: In a fast car, so not an NC.

Re:

Postby SPy vs. SPy » Sun Nov 12, 2006 8:51 pm

Boags'MX5 wrote:I may be lying about the size of his weiner

Boags


yes you can use html, we're over it :frown:

and were's my damn steak......
Went for a drive and there were slow cars everywhere, why are NC's so common . . . must be NC = Normally Cardiganed.
Top
User avatar
Uncle Arthur
Dodgy Award Benefactor
Posts: 1802
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Doesn't matter where I'm from-it's that your daughter is with me that's the biggest concern :D
Contact:
Contact Uncle Arthur

Postby Uncle Arthur » Sun Nov 12, 2006 11:16 pm

Yay for dodgy!!!

24 mm sockets for the diff.

I'll bring KitKat's toolbox.

What's the address? Not sure what dodgy I'll be doing - it will no doubt be turbo related.....the LSD got fitted today - it's tight.....
Founder of the QLD Chapter of the Honourable Brothers of Dodgy.

Benefactor of the Perpetual Dodgy award - Inaugural year 2007.
Top
User avatar
sabretooth
Speed Racer
Posts: 2119
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NA8 - Turbo

Re:

Postby sabretooth » Mon Nov 13, 2006 1:04 am

Boags'MX5 wrote:I'm leaking a bit of oil, so I want to replace all the seals. Can you let me know what the part numbers are for those Andrew (if they are the same on an NA8 :? )

So yes, i'll be there with bells on! 8) *I may be lying about the bells*

Boags

Christ man - you gotta at least wear -something-! :P

I'm a probably - I may end up leaving before dinner though, so we'll see what happens there.
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Mon Nov 13, 2006 6:27 am

I'll be over around lunch o'clock after winning the Saturday golf club competition to lend a hand/get in the way/niggle Jules and Wayne about having windblockers etc. :mrgreen:
Image
Top
99MXV
Racing Driver
Posts: 1713
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Toowoomba

Postby 99MXV » Mon Nov 13, 2006 8:12 am

THERE SHALL BE WINGZZZZZZZZZZZZZZ

We need another fryer for fast batches.

SPY - You bringing the Nuclear and Thermonuclear sauce ? I'll bring the regular unleaded.

Jules - Tabs Blue Cheese was sensational. I designate her as making yet another half litre.

KitKat.. bring enough oil for your fryer please.

NOW.. do we need a BBQ ? if so someone more local may need to arrange.

5 days till dodgy.

I shall bring wingzz for all, and BEER (for the trip up!)
Won't be long now... On the hunt for an MX5
Top
OMY005
Racing Driver
Posts: 502
Joined: Fri Mar 04, 2005 9:26 pm
Vehicle: ND - 2 GT
Location: Brisbane, Australia

Re:

Postby OMY005 » Mon Nov 13, 2006 8:28 am

Boags'MX5 wrote:I'm leaking a bit of oil, so I want to replace all the seals. Can you let me know what the part numbers are for those Andrew (if they are the same on an NA8 :? )


I got a ACL seal kit from Supercheap (I tried a few places and they were the cheapest) it had 2 cam seals as they are the same for both 1.6 & 1.8. And 2 crank seals one for big and small nose cranks. Sorry I don't have the part #'s.

Andrew. :)
Previously, White 95 NA 1.8 Hard Top,Stock standard
Now, 2016 Fiat 500x, 2014 Fiat 500, 2015 ND GT 2.0
Top
User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:
Contact jules

Postby jules » Mon Nov 13, 2006 10:20 am

Guys, could we get a schedule of events?
At this stage it seems we have.

Red5 - Engine (possibly need the pit, winch, Andrew, Sabre etc.)
Jules - Small oily stuff, pit would be useful if not jacking up car, 1/2 hr job for diff and box, brakes and clutch perhaps another 30mins.
Boags - front engine seals, just need to jack the front up to save his back when bending into the bay
Mikey - Engine bay toying.
Wayne - Wingzzzzzzzzzz and main feature \"Ceremonial Returning of the Knob\"

Once we have a list we can allocate Andrews workshop space the best.

Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image
Top
OMY005
Racing Driver
Posts: 502
Joined: Fri Mar 04, 2005 9:26 pm
Vehicle: ND - 2 GT
Location: Brisbane, Australia

Re:

Postby OMY005 » Mon Nov 13, 2006 10:53 am

jules wrote:Red5 - Engine (possibly need the pit, winch, Andrew, Sabre etc.)


Pit and winch are mutually inclusive. The hole in the floor is directly bellow the track the winch is on.

I do have a second hole in the floor on the other side of the shed that I have not used. I'll see if I can get every thing in place to use it as well.

Andrew. :)
Previously, White 95 NA 1.8 Hard Top,Stock standard
Now, 2016 Fiat 500x, 2014 Fiat 500, 2015 ND GT 2.0
Top
NMX516
Speed Racer
Posts: 2057
Joined: Mon Jun 19, 2006 12:05 pm
Vehicle: NB SP
Location: Brisbane

Postby NMX516 » Mon Nov 13, 2006 10:54 am

I'll be there post lunch... :)

No work in dire need of being done on mine.

I think the engine swap should be a priority guys so that red5 can be back on the road asap.

Andrew, PM sent.
Pain is temporary, quitting lasts forever.
Top
Post Reply

Return to “MX5 Events”

Who is online

Users browsing this forum: No registered users and 74 guests