Hey guys,
Thought this would be the place to ask - my brake pedal is practically dead, took my car to ABS thinking it was a master cylinder issue, but turns out my back calipers need fixing/replacing. They've quoted me around $300 all up to get it done in 1-2 days.
Just wondering if anyone here has replaced theirs before, and what the cost was?
Calipers.
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
-
- Driver
- Posts: 46
- Joined: Fri Jan 13, 2006 1:32 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Calipers.
Vroommm.
- Garry
- Speed Racer
- Posts: 3481
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: NB SP
- Location: God's Country
- Contact:
Have the slider pins seized or have the pistons seized in the bores? $300 sounds cheap for 2 new brake calipers installed.
Seized slider pins are a fairly common complaint for cars that dont get their brakes serviced regularly. I dont think seized piston are as common but can happen if the piston dust seal failes or if the brakes aren't bled on a regular basis. One of my NA front brake pistons seized because the dust seal wasn't fitted properly allowing water to get in and rust the piston. A new piston and seals fixed it all up for about $60 from memory (excl labour)
Seized slider pins are a fairly common complaint for cars that dont get their brakes serviced regularly. I dont think seized piston are as common but can happen if the piston dust seal failes or if the brakes aren't bled on a regular basis. One of my NA front brake pistons seized because the dust seal wasn't fitted properly allowing water to get in and rust the piston. A new piston and seals fixed it all up for about $60 from memory (excl labour)
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
-
- Driver
- Posts: 46
- Joined: Fri Jan 13, 2006 1:32 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Well to be honest, I don't know. My mechanical knowledge is rather limited heh :/ All I know is that they were leaking (one side worse than the other). I gave my father a call and he's gonna take a peak tomorrow as well. But if getting them fixed for $300 is pretty cheap, then great
Thanks!

Vroommm.
- Garry
- Speed Racer
- Posts: 3481
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: NB SP
- Location: God's Country
- Contact:
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: Bing [Bot] and 3 guests