tyre pressures

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
zoomzoom
Racing Driver
Posts: 891
Joined: Wed Oct 25, 2006 7:59 pm
Vehicle: NA6 - Turbo
Location: Brisbane

tyre pressures

Postby zoomzoom » Sat Oct 28, 2006 4:22 pm

ok i know alot of ppl run very high pressure but when i did a sprint recently i found i couldnt really get enough traction till i let mine down to about 28psi front and 26psi rear. i thought this to be extremely low...opinions? for the record my tyres are 205/50R15 potenza GIII (won't make that mistake again)

what sort of tyre pressures do other ppl tend to run for track? obviously this will vastly differ for tyre size, compound and track surface etc. but i am just curious of all your ideas on the subject

tim

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Sat Oct 28, 2006 7:16 pm

Last track day I tried 32 psi cold all round.
Might try 30 psi cold on 8 Nov.
Tyres 195/50 15 Pirelli Dragon which seem to have stiff sidewalls.
Image

User avatar
zoomzoom
Racing Driver
Posts: 891
Joined: Wed Oct 25, 2006 7:59 pm
Vehicle: NA6 - Turbo
Location: Brisbane

Postby zoomzoom » Sat Oct 28, 2006 7:19 pm

ok, its good to see im not the only one who doesnt rum 40-50psi. its amazing how much the car did slide around with even mid 30's

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Postby Boags » Sat Oct 28, 2006 7:38 pm

I was running 40psi cold, and feel was better, however it was eager to let go as you say. I tried them at 36psi cold, and that made them feel floatier, but they want to hold on longer now. This is for hard driving only, 32psi for dd. I will be trying 32psi for tomorrow.

BTW, i'm running 195/50/15 Nankang NKIIs chinese budget sports tyre. They grip WAY better than I would expect for $85 a corner.

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au

phatMX

Postby phatMX » Sat Oct 28, 2006 9:36 pm

I tried low pressures on the RT615's and hated it, seemed too squirmy after talking to ASE05 i upped to 35 hot and it was a lot better.

User avatar
smiles
Fast Driver
Posts: 354
Joined: Sun Dec 25, 2005 12:26 am
Vehicle: ND - 2 GT
Location: Melbourne

Re:

Postby smiles » Sat Oct 28, 2006 10:37 pm

phatMX wrote:I tried low pressures on the RT615's and hated it, seemed too squirmy after talking to ASE05 i upped to 35 hot and it was a lot better.


35 hot is probably not far off 28 cold.

Depends on the tyres but I find about 26-28 cold is good on the old RT215's.

User avatar
zoomzoom
Racing Driver
Posts: 891
Joined: Wed Oct 25, 2006 7:59 pm
Vehicle: NA6 - Turbo
Location: Brisbane

Postby zoomzoom » Sun Oct 29, 2006 11:51 am

i found that the pressure seems to rise around 2-3psi when the tyres warm up.

Is there any power at QR? just thinking it might be an idea to take a little compressor so we can play around with tyre pressures and have the ability to pump them up a little if we go too far.

Or is somebody already taking one?

phatMX

Postby phatMX » Sun Oct 29, 2006 12:35 pm

there is one there, on the wall of the shed closest to the QR admin building. It has a tyre pressure gauge on it too.

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Postby Boags » Sun Oct 29, 2006 5:41 pm

When i filled my tyres to 36cold, they were 41psihot that day.

5psi rise.

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 134 guests