Help! Clunking noise from the front!

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

User avatar
PT
Racing Driver
Posts: 1188
Joined: Sat May 21, 2005 7:11 pm
Vehicle: NB8B
Location: Brisbane
Contact:

Postby PT » Wed Sep 27, 2006 5:58 pm

It's bushes, common problem...

I think it's the lower a arm bushes that go from memory, someone will confirm though I'm sure.
2001 Mazda MX-5 NB8B- http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=61506

Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Postby Boags » Fri Sep 29, 2006 5:21 pm

Hmmmmmmmmmm :cry: I had the same noise the other day... Sounds like a project for dodgy day III

Price for the bushes?

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au

User avatar
PT
Racing Driver
Posts: 1188
Joined: Sat May 21, 2005 7:11 pm
Vehicle: NB8B
Location: Brisbane
Contact:

Postby PT » Fri Sep 29, 2006 7:23 pm

From memory, about $600
2001 Mazda MX-5 NB8B- http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=61506

Past:
2005 Mazda MX-5 SE
1991 Mazda MX-5 NA6

dab
Driver
Posts: 47
Joined: Sun Jan 22, 2006 11:12 pm
Vehicle: NB8B
Location: Brisbane

Postby dab » Fri Sep 29, 2006 10:04 pm

they easyest way to check from wheel baring movement is this, Jack the car up and grab the wheel at 12 and 6 o'clock. and try to wabble it up and down , in and out sorta thing, if it has movement then it is probly a wheel baring, when u wabble it look for the movemeent. Put your hands at 3, and 9 then try to wabble it side to side( not turning the steering wheel) if their is movement then its probly a tierod end or a tie rod where it joins the rack, again if their is movement try to see what part is moving.

hope u can understand this.

glen73
Fast Driver
Posts: 370
Joined: Sun Aug 21, 2005 12:08 pm
Vehicle: NA6
Location: Dromana Vic.
Contact:

Re:

Postby glen73 » Sat Sep 30, 2006 12:22 am

dab wrote:Jack the car up and grab the wheel at 12 and 6 o'clock. and try to wabble it up and down , in and out sorta thing, if it has movement then it is probly a wheel baring, when u wabble it look for the movemeent. Put your hands at 3, and 9 then try to wabble it side to side


sounds like the latest dance craze,

just joking :)


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 5 guests