TEIN Coilovers

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

yjl

TEIN Coilovers

Postby yjl » Tue Sep 26, 2006 2:57 pm

For you guys with adjustable height coilovers, do you have the same height all round? front lower than rear? (or vice versa). Which would be the best setting for street/track?


Also, what damping setting do most people have on the street with TEIN FLEX?

Thanks

User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:

Postby Brad » Tue Sep 26, 2006 4:39 pm

My SS are set to about 1cm lower than factory with a few extra mm on the drivers side to allow for weight on that side. Not properly corner weighted by any means but the 50/50 distribution of the MX5 makes an equal setting about right.

FWIW i have my dampers set to 10/10, 16 be hardest for the road and 14/12 for the track.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image

User avatar
fish
Fast Driver
Posts: 300
Joined: Sun Mar 05, 2006 10:53 pm
Vehicle: ND - 2 GT
Location: BRISBANE

..

Postby fish » Tue Sep 26, 2006 9:44 pm

I have mine on around 10/10 for the street and 16/15 for the track . I am finding they aren't siff enuff for my liking on track I may get a beefier spring i think
born again 1994 NA8 2F RACE CAR ....No 42
Image

User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:

Postby Brad » Wed Sep 27, 2006 12:48 am

Yeah, it's the springs that will really make a difference to the feel of the car on the track but you don't want to overspring the dampers. I found the harder I went on the shocks, the more grip I had on smooth surfaces but as soon as I came through a bumpy section it was loosing grip. Makes sense.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image

yjl

Postby yjl » Wed Sep 27, 2006 4:56 am

how about the height settings?? I noticed when the wheels were removed, the front were set by the previous owner to be 2-3 cms lower than the rear. Has anyone got similar settings? should I keep it that way or adjust it to be level all round?

User avatar
pcmx5
Racing Driver
Posts: 1648
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: ND - 2
Location: Geelong Vic.
Contact:

Postby pcmx5 » Wed Sep 27, 2006 8:42 am

Mine are set as they came out of the box(aust delivered) and are at the same height front/rear.

Peter.
.Now ND2 Roadster prev NC2 Recaro's ,BBS wheels,full exhaust, Tiens NA 1.6.NA 1.8 LE(106RWKW)NC1,NC2.ND 1.5 .

Richee
Racing Driver
Posts: 591
Joined: Sun Nov 27, 2005 8:17 am
Vehicle: ND - 2 GT
Location: Brisbane - Westside

Postby Richee » Wed Sep 27, 2006 12:10 pm

Out of the box settings for my SS also.

Set to 10/10, must play with the settings some day :D
Mazda Tribute - its a boat
Coming - Jayco Eagle wind up camper - woo hoo
Ex cars 2007 NC LE Radiant Ebony, 1990 Eunos Neo Green LE

User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:

Re:

Postby Brad » Wed Sep 27, 2006 12:39 pm

Richee wrote:Out of the box settings for my SS also.

Set to 10/10, must play with the settings some day :D


That's the best part. Try setting it to 15 clicks from hard (softest setting) and drive it for a day, then go to full hard and the difference is incredible and way more than I was expecting.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image

The Pupat
Fast Driver
Posts: 350
Joined: Mon Mar 01, 2004 10:21 pm
Vehicle: ND - 2 GT
Location: Brisbane

Postby The Pupat » Wed Sep 27, 2006 1:43 pm

Raised a tiny bit at the front is the best setting for a car around a race track. Though I haven't tried it to find out.
'92, Red, Hardtop, Noisy CAI, Even more Noisy Exhaust, AVO Shocks with TJR Springs (Not so Fuli drifto speco).

User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:

Re:

Postby Brad » Wed Sep 27, 2006 3:19 pm

The Pupat wrote:Raised a tiny bit at the front is the best setting for a car around a race track. Though I haven't tried it to find out.


What's the basis for setting up this way then and what car are we talking about here?
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image

The Pupat
Fast Driver
Posts: 350
Joined: Mon Mar 01, 2004 10:21 pm
Vehicle: ND - 2 GT
Location: Brisbane

Re:

Postby The Pupat » Wed Sep 27, 2006 4:37 pm

Brad wrote:
The Pupat wrote:Raised a tiny bit at the front is the best setting for a car around a race track. Though I haven't tried it to find out.


What's the basis for setting up this way then and what car are we talking about here?


Better grip all round IE acceleration and more stable under brakes. Works for just about all Front Engined RWD.

http://www.performanceforums.com/forums/showthread.php?t=67204662 Read posts by edo, he's usually fairly good and setting up cars to be quick.
'92, Red, Hardtop, Noisy CAI, Even more Noisy Exhaust, AVO Shocks with TJR Springs (Not so Fuli drifto speco).

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Postby Okibi » Wed Sep 27, 2006 11:24 pm

Mine are set to the height recommended by Tein in Japan.

I usually run them on about 6 clicks (from softest) or softest when the mrs is driving.
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
Lev
Driver
Posts: 38
Joined: Thu Aug 26, 2004 12:23 pm
Vehicle: NA6

Postby Lev » Wed Sep 27, 2006 11:43 pm

I've got mine set to same height as it was when it came out the box. I drive them 3 clicks off the hardest. Surprised that others have theirs so soft?

User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:

Re:

Postby Brad » Thu Sep 28, 2006 9:52 am

Lev wrote:I've got mine set to same height as it was when it came out the box. I drive them 3 clicks off the hardest. Surprised that others have theirs so soft?


It all depends on the streets you drive on. Where I live there is a lot of redevelopment going on so they are constantly digging the road up and re filling it. Stiffer does not mean more grip if the spring can't rebound quick enough to follow the road.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image

User avatar
rhysk
Fast Driver
Posts: 475
Joined: Wed Nov 26, 2003 4:28 pm
Vehicle: NB8A - Supercharged
Location: london
Contact:

Re:

Postby rhysk » Thu Sep 28, 2006 11:48 am

Brad wrote:Where I live there is a lot of redevelopment going on so they are constantly digging the road up and re filling it.


Tell me about it :evil:
I have enough trouble with Konis and progressive rate Kings.
supercharged NB (in Brisbane) - qr 1:01:75 (s), 1:05.90 (c)
jaguar xjr supercharged v8


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 39 guests