this look like it would pass cams?

Anything to do with the MX5 and Motor Sport

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:
Contact irwin83r

this look like it would pass cams?

Postby irwin83r » Wed Sep 06, 2006 12:09 am

Image

Image

because...

Image

damn it sexy
Top
User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:
Contact Brad

Postby Brad » Wed Sep 06, 2006 9:53 am

I'd say no as it's too low and your helmeted head will stick over the hoops. The Brown Davis has troubles and really needs a race seat be be CAMS approved.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image
Top
User avatar
CT
Racing Driver
Posts: 1418
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SP
Location: By the lake...
Contact:
Contact CT

Postby CT » Wed Sep 06, 2006 12:54 pm

No chance in the wide world. Cage must at least have a single one piece main hoop with two rear stays, one forward stay and minimum of 1 diagonal in the main hoop, two are now recommended. And that's the bare minimum which means a brown davis with a forward stay attached to the centre of the main hoop dropping down to the passenger floor would be the absolute minimum required to pass. 8)
2006 Z06 Corvette - 650hp of wow!
Top
Ren

Postby Ren » Wed Sep 06, 2006 3:10 pm

The side of the bar is a problem; you have to loose the soft top so that you gain the width of the bar.
Top
User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:
Contact irwin83r

Postby irwin83r » Wed Sep 06, 2006 6:03 pm

poop

yeah guess if BD has problems anything less is just being silly :P

cheers.
Top
MX5MANIAC

Postby MX5MANIAC » Wed Sep 06, 2006 7:01 pm

looks sweeet though 8)
Top
User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:
Contact irwin83r

Postby irwin83r » Wed Sep 06, 2006 9:44 pm

yeah.

theres one being made in uk that has a twin hoop look that may pass cams for club level stuff apparently. but its a big maybe.

ill try and find a pic
Top
Post Reply

Return to “MX5 Motor Sport”

Who is online

Users browsing this forum: No registered users and 2 guests