Too Slot ... or not to Slot?

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
User avatar
Lucky_Luke
Fast Driver
Posts: 348
Joined: Tue Mar 07, 2006 10:45 pm
Vehicle: NC
Location: Adelaide
Contact:
Contact Lucky_Luke

Too Slot ... or not to Slot?

Postby Lucky_Luke » Fri Aug 11, 2006 6:24 pm

Hey guys,
Ive finally found some NA8 brakes and they should be here next tuesday ... :D

With the upgraded brakes on my NA6 is there a need to have the front rotors slotted besides them looking cool?

I understand the reason for using slots but I'm wondering whether I should get these near new original rotors slotted , is there really a need with the already bigger discs...
has anyone else with this upgrade found the need to slot their discs?

I'd just like to know i suppose.. before i go bedding in some new pads..

Im not really planning to race.. mainly just heavy hills runs for now...

Cheers.
Luke.
Top
SPy vs. SPy
Racing Driver
Posts: 902
Joined: Wed Mar 10, 2004 7:40 pm
Vehicle: ND - 2
Location: In a fast car, so not an NC.

Postby SPy vs. SPy » Sat Aug 12, 2006 12:55 am

I believe the idea behind slotted brakes is to sweep the brake pad clean, ergo better \"bite\" from the pad.
Went for a drive and there were slow cars everywhere, why are NC's so common . . . must be NC = Normally Cardiganed.
Top
User avatar
Mr_Q
Racing Driver
Posts: 814
Joined: Tue Aug 10, 2004 4:41 pm
Vehicle: NB SE
Location: Sydney, Australia
Contact:
Contact Mr_Q

Re: Too Slot ... or not to Slot?

Postby Mr_Q » Sat Aug 12, 2006 9:08 am

Lucky_Luke wrote:Im not really planning to race..

In that case slotting will be mainly cosmetic.
Mister Q
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
Top
User avatar
Lucky_Luke
Fast Driver
Posts: 348
Joined: Tue Mar 07, 2006 10:45 pm
Vehicle: NC
Location: Adelaide
Contact:
Contact Lucky_Luke

Postby Lucky_Luke » Mon Aug 14, 2006 10:24 am

Thanks guys, Ive got a mate here who has a mill and does it regularly.
Theres heaps of meat on them so I may as well get them done anyway... Slots for a carton.... sounds like a fair trade.. cant really go wrong! :D
Top
User avatar
greenMachine
Forum Guru
Posts: 4088
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:
Contact greenMachine

Postby greenMachine » Mon Aug 14, 2006 8:41 pm

Ive got a mate here who has a mill and does it regularly.


:shock: :shock: :shock:

.. cant really go wrong!


Want to bet?
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )
Top
User avatar
Okibi
Speed Racer
Posts: 10903
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Postby Okibi » Wed Aug 16, 2006 8:33 pm

Almost as dodgy as the hand drilled discs on my friends WRX :lol:
If you had access to a car like this, would you take it back right away? Neither would I.
Top
User avatar
SuperMazdaKart
Racing Driver
Posts: 1980
Joined: Tue Oct 26, 2004 9:10 pm
Vehicle: ND - 2 GT
Location: Adelaide

Postby SuperMazdaKart » Wed Aug 16, 2006 8:39 pm

i'd say leave them as is & when they wear down to the stage where they need replacing, then get new ones already slotted
Image
Top
User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:
Contact Boags

Postby Boags » Wed Aug 16, 2006 9:06 pm

Heaps of the race guys slot their own discs so they don't have to spend the extra money.

I am one of them. Brakes are much cooler now. (Datsun 240K with solid rotors on the front) 8)

Boags
Spartan Motor Sport : http://www.SpartanMS.com.au
Top
Mick93
Driver
Posts: 80
Joined: Fri Dec 10, 2004 4:21 pm
Vehicle: ND - 2 GT
Location: Sydney

Postby Mick93 » Thu Aug 17, 2006 9:03 am

If you want slotted disc go buy them rather than getting stock ones done. Remember you will be cleaning your wheels every other day though.
Top
User avatar
Lucky_Luke
Fast Driver
Posts: 348
Joined: Tue Mar 07, 2006 10:45 pm
Vehicle: NC
Location: Adelaide
Contact:
Contact Lucky_Luke

Postby Lucky_Luke » Thu Aug 17, 2006 10:31 am

I would prefer to buy some slotted ones but I've just spent a small fortune on buying slotted 1.6L rotors and then decided to get the full 4 corner 1.8L brake upgrade.. and the 1.8L discs are all near new..

Hes not that dodgy.. :lol: he machines alot of the hybrid turbos around adelaide and slots lots of the drift car discs as well.. see how much he wants anyway ..otherwise im up for another $300 for front dbas..

I dont think I'll be hand drilling or grinding.. I would have thought there'd be way too many inaccuracies that could cause unbalance.... well i prob wouldnt risk it IMO.

Anyone have any experience or feedback on using the standard slotted dbas
Image
compared to the 6x6 wiper slots...?
Image
Top
User avatar
Lucky_Luke
Fast Driver
Posts: 348
Joined: Tue Mar 07, 2006 10:45 pm
Vehicle: NC
Location: Adelaide
Contact:
Contact Lucky_Luke

Postby Lucky_Luke » Thu Aug 17, 2006 6:10 pm

Just went to see my mate..

Front rotors - Machining... $20 for both (done by a brake place)
Front rotors - Slotting... $30 for both (my mate)

hmmm.. very tempting..
Top
User avatar
Lucky_Luke
Fast Driver
Posts: 348
Joined: Tue Mar 07, 2006 10:45 pm
Vehicle: NC
Location: Adelaide
Contact:
Contact Lucky_Luke

Postby Lucky_Luke » Mon Aug 28, 2006 10:13 pm

Update!
Just got my rotors back.. As i mentioned in my previous post.. just got my rotors slotted.
Here is my newly slotted standard NB8 rotor on the right compared to the slotted NA6 rotor on the left.

Very happy indeed! :D

Luke.

Image
Top
User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:
Contact Boags

Postby Boags » Mon Aug 28, 2006 11:03 pm

Very cool! 8) :mrgreen: Very envious... :twisted:
Spartan Motor Sport : http://www.SpartanMS.com.au
Top
Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:
Contact Adam_NAclubman

Postby Adam_NAclubman » Tue Aug 29, 2006 2:45 am

Your mate that did it isnt Greg is he?
Top
User avatar
Lucky_Luke
Fast Driver
Posts: 348
Joined: Tue Mar 07, 2006 10:45 pm
Vehicle: NC
Location: Adelaide
Contact:
Contact Lucky_Luke

Postby Lucky_Luke » Tue Aug 29, 2006 9:51 am

Nah I pretty happy with them i cant really tell the difference between them and the orig slotted ones.

Nah Adam, his names Kevin, runs a small engineering workshop in edwardstown.
Top
Post Reply

Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 1 guest