Patchy's Fawlty Towers risk management. Enter at own risk

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Patchy's Fawlty Towers risk management. Enter at own risk

Postby StanTheMan » Fri Jul 07, 2006 11:00 am

Ok....its begun

The \"almost stock 1.6\" is getting a paint job.

firstly is the bumperbar. Its currently white. It had started out as a classic red & the current paint is peeling off. so figure, its not a good start to use it as a base. So all the current paint has to come off.

Whats the best way to strip the paint off without sanding too much as i figure if i sand it all off its going to pretty hard not to get it wavy. In some parts it will peel off.
this is how it looks currently.
Image

i'll be bleeding the knowlege base on this forum a fair bit.....so any help will be apreciated.
:mrgreen:

STM.
Last edited by StanTheMan on Sat Mar 15, 2008 6:17 pm, edited 1 time in total.
Satans Ride called F33nix the resurrected NA6
Top
User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:
Contact Garry

Postby Garry » Fri Jul 07, 2006 12:58 pm

You can get dedicated bumper paint stripper. It removes the paint without damaging the plastic bumper cover. It comes in a spray can and is available at specialist automotive paint suppliers.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
Top
Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:
Contact Adam_NAclubman

Postby Adam_NAclubman » Fri Jul 07, 2006 7:51 pm

Since some of it is peeled off anyway, just hit it with the high pressure spray at a carwash, it'll peel the rest of the paint off easily
Top
EGG80X
Racing Driver
Posts: 577
Joined: Tue Feb 08, 2005 6:56 pm
Vehicle: ND - 2 GT
Location: Sydney

Postby EGG80X » Fri Jul 07, 2006 8:20 pm

Is Stefan going to be our new DIY King?
Top
User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Postby StanTheMan » Fri Jul 07, 2006 10:55 pm

Well I ended up putting elbow grease into it. Its turning out OK. Got just a litte less than half done. As I'm sanding, the loose bits just come off anyway. Looks like this is going to take quite some time to do the whole car.LOL

This bumper has had 2 coast of white & 1 coat of red.....with primer under each ..... Ohh well its all comming off. :mrgreen:

as for DIY King....Not sure there Eggbox.....astro & Steve818 have done thiers too. they both deserve standing aplause.
Satans Ride called F33nix the resurrected NA6
Top
User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Postby StanTheMan » Fri Aug 18, 2006 11:07 pm

well the bumper is finally on. As well as the light cover & front side panel.
The bumper ended up being a different bumper than the one above.
Image

This one has the original paint which is flexible. So none of the paint chipping & cracking issues once its sprayed....... But ......it also has some added bling :mrgreen: :mrgreen: 8)
Check out the ultra cool Air Duct...
broken link


Ladies & Gentlemen....let me assure you....it is totally useless. But ohhhh..the brag factor :mrgreen: :mrgreen: 8)
Thanks to lowmiata, & Mr_Q for thier bits.

I've started talking to the local paint suplier who is more than happy to help. So....Its all good. A fair bit of prepping work is still required.

Also the lining up is with fenders , bonnets & light covers is proving to be a little headache for me. Ohh well......maybe the next Dodgy Day :mrgreen:
Satans Ride called F33nix the resurrected NA6
Top
User avatar
Okibi
Speed Racer
Posts: 10899
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Postby Okibi » Fri Aug 18, 2006 11:59 pm

With all those mismatched panels, your d0ri d0ri spec reputation will be intact.
If you had access to a car like this, would you take it back right away? Neither would I.
Top
User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Postby StanTheMan » Sat Aug 19, 2006 12:00 am

Bunta...... :lol: :mrgreen: 8)
Satans Ride called F33nix the resurrected NA6
Top
User avatar
Okibi
Speed Racer
Posts: 10899
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Postby Okibi » Sat Aug 19, 2006 12:16 am

is that Bunta as in InitialD or as in Bunting Armco?
If you had access to a car like this, would you take it back right away? Neither would I.
Top
User avatar
lowmiata
Racing Driver
Posts: 848
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: ND - 2 GT
Location: gone fishin
Contact:
Contact lowmiata

Postby lowmiata » Sat Aug 19, 2006 10:37 pm

just glad to see the stuff go to a good home :mrgreen:
EVI15 1998 to 2008
Top
User avatar
Mr_Q
Racing Driver
Posts: 814
Joined: Tue Aug 10, 2004 4:41 pm
Vehicle: NB SE
Location: Sydney, Australia
Contact:
Contact Mr_Q

Re:

Postby Mr_Q » Sun Aug 20, 2006 10:08 am

lowmiata wrote:just glad to see the stuff go to a good home :mrgreen:

Likewise. :)

What colours are you painting the rear? :D :D
Mister Q
Had: Red 2004 SE, Red 1993 NA8 Clubman, Green 1991 NA6 LE
Top
Spranga
Racing Driver
Posts: 670
Joined: Thu Feb 24, 2005 9:44 pm
Vehicle: ND - 2 GT
Location: Inner West Sydney

Postby Spranga » Sun Aug 20, 2006 11:02 pm

I don't think MX5's make very good Taxi's but yours is doing a good impression at the moment Stan :P

Seriously though mate it is good to see it is progressing well. I am impressed with your skill as I believe lining up the front end of an NA is hard with so many angles around the cone and pop-up lights.

Are you any good at removing hail damage????

Dan
Top
User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Postby StanTheMan » Mon Aug 21, 2006 8:45 am

spranga....replacing panels is easy. I'm sure you can do it too. Just getting them lined up is the hard bit. :lol:
Satans Ride called F33nix the resurrected NA6
Top
User avatar
nath
Fast Driver
Posts: 262
Joined: Thu Oct 14, 2004 7:04 pm
Vehicle: ND - 2 GT
Location: Sydney

Postby nath » Mon Aug 21, 2006 7:09 pm

STM,

Let me know if you need help sanding back and doing prep work. Always willing to lend a helping hand.

Cheers,

Nath
Top
User avatar
Andrew
Speed Racer
Posts: 2630
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NC

Postby Andrew » Tue Aug 29, 2006 6:50 pm

You could continue the black theme and end up with something like this :mrgreen:
Top
Post Reply

Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 53 guests