Tein SS question regarding upper mounts

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Tein SS question regarding upper mounts

Postby DanielB » Wed Jun 28, 2006 2:41 pm

Hey guys

Just a quick question i'm hoping you can help me with. I'm looking to purchase a set of Tein super street coilovers for my NA. I have noticed that there are two kinds; those that come with tein upper mounts, and those that dont.

Price difference is around $300 between the two.. what exactly is the difference? Will using the standard upper mounts be noticibly different to using the set that tein supply with one of their kits?


EDIT

I noticed that only the ones with the Tein upper mounts are compatible with the EDFC.. That is not of concern to me, so am i better off going with the cheaper kit?

User avatar
Brad
Racing Driver
Posts: 613
Joined: Fri Aug 29, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Brisbane
Contact:

Postby Brad » Wed Jun 28, 2006 4:43 pm

Upper mounts, you must be referring to pillowball mounts? Pillow balls are needed if you want to adjust camber on strut type suspension, like Macpherson strut where there are not camber adjustments at the control arm. The MX5 doesn't need these as you can adjust the camber from the bushes on the lower control arm.

If however you want to run major camber then you should get pillow balls as they allow the shock to swing more to the outside of the car. You also need to have offset bushes installed to get that camber in the first place.

I'd say you don't need them. BTW the EDFC is compatible with the standard tops of the SS.
Last edited by Brad on Wed Jun 28, 2006 4:51 pm, edited 1 time in total.
1994 MX5 Clubman - RB CAI & ARB - BD Rollbar - X-Force headers & Zorst - Tein SS
Image

User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Postby DanielB » Wed Jun 28, 2006 4:50 pm

Thanks for the information Brad.. just what i needed to know!

User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Postby DanielB » Wed Jun 28, 2006 7:03 pm

Just for anyone interested, i have managed to find a supplier that can get the Tein SS coilovers with pillowball mounts for ~$1650 delivered! Pretty happy about that price.

User avatar
rodent
강남 스타일
Posts: 801
Joined: Tue Feb 07, 2006 11:17 pm
Vehicle: NA8
Location: Sydney West

Re:

Postby rodent » Wed Jun 28, 2006 7:53 pm

DanielB wrote:Just for anyone interested, i have managed to find a supplier that can get the Tein SS coilovers with pillowball mounts for ~$1650 delivered! Pretty happy about that price.

...so does that mean the version without the mounts can be had for ~$1350? :shock:
Image

User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Postby DanielB » Wed Jun 28, 2006 9:11 pm

Cheapest i can find the Tein SS's without the pillow mounts was for ~$960 brand new before shipping\\taxes from Japan, so i'd say around $1400 delivered! I am awaiting on an exact price from Greenline which i should get tomorrow, so i'll update this post then.

http://www.greenline.jp/catalogue/bccatpartlist.php?make=Mazda&carcode=NA6CEA&intake=NA&category=suspension

Perfect Run (http://www.perfectrun.com.au) have the Pillowball mount model cheaper than greenline do; 97,700 Yen which is about $1,150 AU before delivery.

User avatar
Matty
Racing Driver
Posts: 1652
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB8A
Location: Melbourne
Contact:

Postby Matty » Wed Jun 28, 2006 9:58 pm

Assuming they're like the HA pillowballs (they're not identical but fairly close), you'll net a fraction more bump travel (maybe 5-10mm), and theoretically better damper control by virtue of removal of the rubber bits...

User avatar
rvlovell
Fast Driver
Posts: 267
Joined: Sun Apr 18, 2004 7:46 pm
Vehicle: NC
Location: Beenleigh

Re:

Postby rvlovell » Thu Jun 29, 2006 5:46 pm

DanielB wrote:Just for anyone interested, i have managed to find a supplier that can get the Tein SS coilovers with pillowball mounts for ~$1650 delivered! Pretty happy about that price.


Whos doing them at that price :?:
Back to having no money, damn my obsession.

User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Postby DanielB » Thu Jun 29, 2006 6:11 pm

I have been quoted that price by PerfectRun, website is mentioned a few posts above.

I have just paid for a set, $1435 without the mounts through Greenline. Can't wait to get them.

Babalouie
godfather of saké
Posts: 1457
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Sydney Australia
Contact:

Re: Tein SS question regarding upper mounts

Postby Babalouie » Thu Jun 29, 2006 9:16 pm

DanielB wrote:Hey guys

Just a quick question i'm hoping you can help me with. I'm looking to purchase a set of Tein super street coilovers for my NA. I have noticed that there are two kinds; those that come with tein upper mounts, and those that dont.

Price difference is around $300 between the two.. what exactly is the difference? Will using the standard upper mounts be noticibly different to using the set that tein supply with one of their kits?


EDIT

I noticed that only the ones with the Tein upper mounts are compatible with the EDFC.. That is not of concern to me, so am i better off going with the cheaper kit?


The japanese optional upper mount for SS isn't pillowball, but is a "reinforced rubber uppper mount". Basically it's an alloy plate with a stock-type rubber bushing in the middle. Based on Justinfox's experience, it does seem to allow the car to sit lower, like Matty says.

I'm not sure if the EDFC can only work with the Tein upper mounts or not, but the stock mounts have a "sunken" middle section which might not provide enough room for the EDFC motor thingies, but I'm not sure.
Image
Japanese Nostalgic Car Magazine - Dedicated to classic japanese cars

User avatar
rvlovell
Fast Driver
Posts: 267
Joined: Sun Apr 18, 2004 7:46 pm
Vehicle: NC
Location: Beenleigh

Re:

Postby rvlovell » Fri Jun 30, 2006 3:40 pm

DanielB wrote:I have been quoted that price by PerfectRun, website is mentioned a few posts above.

I have just paid for a set, $1435 without the mounts through Greenline. Can't wait to get them.

Did they say how long for shipment. I would be interested in whether you get charged tax or duty. :?:
Back to having no money, damn my obsession.

User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Postby DanielB » Fri Jun 30, 2006 8:01 pm

From the website:

Orders are normally dispatched between 1-7 days of payment clearing in our accounts. All orders are shipped from Japan.

Your parts should arrive at your designated address approximately 3-6 days (EMS) from the date of dispatch. You will be notified of any delays.


That $1435 price is delivered, no more to pay.

User avatar
rvlovell
Fast Driver
Posts: 267
Joined: Sun Apr 18, 2004 7:46 pm
Vehicle: NC
Location: Beenleigh

Re:

Postby rvlovell » Mon Jul 03, 2006 7:23 pm

DanielB wrote:From the website:

Orders are normally dispatched between 1-7 days of payment clearing in our accounts. All orders are shipped from Japan.

Your parts should arrive at your designated address approximately 3-6 days (EMS) from the date of dispatch. You will be notified of any delays.


That $1435 price is delivered, no more to pay.

No more to pay if customs doesn't charge you anything. Let us now how you go. I didn't pay duty for my soft top but apparently some people have been charged.
Back to having no money, damn my obsession.

User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Postby DanielB » Sat Jul 08, 2006 12:49 pm

They have arrived this morning! Now i just need somewhere i can take them to get installed.. Does anyone have any recomendations in the sydney area?

There was no more to pay, $1435 delivered. Gotta be happy with that!

Babalouie
godfather of saké
Posts: 1457
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Sydney Australia
Contact:

Re:

Postby Babalouie » Sat Jul 08, 2006 1:29 pm

DanielB wrote:They have arrived this morning! Now i just need somewhere i can take them to get installed.. Does anyone have any recomendations in the sydney area?

There was no more to pay, $1435 delivered. Gotta be happy with that!


East Coast Suspensions in Kirrawee do a really good job.
Image
Japanese Nostalgic Car Magazine - Dedicated to classic japanese cars


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 119 guests