I was wondering, would it be possible to paint it? Or i should be more specific, what paint should i use and what adverse affects should i expect?
Basically so it looks something like this:
Painting the instrument cluster dome thingy hahaha
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- Lucky_Luke
- Fast Driver
- Posts: 348
- Joined: Tue Mar 07, 2006 10:45 pm
- Vehicle: NC
- Location: Adelaide
- Contact:
- Fuzzlet
- Racing Driver
- Posts: 1077
- Joined: Sat Feb 25, 2006 6:35 pm
- Vehicle: ND - 2 GT
- Location: Berowra
- Contact:
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
Basically so it looks something like this
Obviously the car aint his... hes asked \"so it looks like this\"... refering to someone elses car, and also its left hand drive meaning its more than likely from the states. His location says melbourne.. read dude..
*calm's down*
sorry dont know what came over me.
- RaYmO
- Racing Driver
- Posts: 587
- Joined: Tue Mar 07, 2006 6:45 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Guys, the above pic was taken from the body kit thread....
The interior belongs to a Miata in the US, tuned by a garage over there with lots of mazdaspeed parts.
Refer to this linky
http://www.mazdausa.com/MusaWeb/displayPage.action?pageParameter=mazdaSpeedTuningPersonal§ionParameter=tunerProfile27&bhcp=1#modsummary
It doesnt mention where that gauge cluster actually comes from... I think it may be a custom job
The interior belongs to a Miata in the US, tuned by a garage over there with lots of mazdaspeed parts.
Refer to this linky
http://www.mazdausa.com/MusaWeb/displayPage.action?pageParameter=mazdaSpeedTuningPersonal§ionParameter=tunerProfile27&bhcp=1#modsummary
It doesnt mention where that gauge cluster actually comes from... I think it may be a custom job
- Lucky_Luke
- Fast Driver
- Posts: 348
- Joined: Tue Mar 07, 2006 10:45 pm
- Vehicle: NC
- Location: Adelaide
- Contact:
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
in the big forum, it says that those gauge clusters were made a while back..there out of production now. Made by some performance joint in japan.
Try doing a search on the miata.net forum, i just did a quick one.
Or you could always go one of these..
heres the link..
http://www.zoom-eng.com/catalog/product_info.php?cPath=49_51_205&products_id=156&osCsid=c4074ad8d93efeabcab9ce688719e48d
Try doing a search on the miata.net forum, i just did a quick one.
Or you could always go one of these..
heres the link..
http://www.zoom-eng.com/catalog/product_info.php?cPath=49_51_205&products_id=156&osCsid=c4074ad8d93efeabcab9ce688719e48d
- Lucky_Luke
- Fast Driver
- Posts: 348
- Joined: Tue Mar 07, 2006 10:45 pm
- Vehicle: NC
- Location: Adelaide
- Contact:
Nice work comet!
Pretty good find!
They both look pretty good... but for my little \"under the radar\" car probably a little to LAM (look at me, look at me!)...
That one there looks pretty well made and would be a pretty awesome addition for a show car !! hmmm... showcar...
doh.. the little voice says \"dont do it... dont spend anymore! no to show!!\"
Pretty good find!
They both look pretty good... but for my little \"under the radar\" car probably a little to LAM (look at me, look at me!)...
That one there looks pretty well made and would be a pretty awesome addition for a show car !! hmmm... showcar...
doh.. the little voice says \"dont do it... dont spend anymore! no to show!!\"
- Fuzzlet
- Racing Driver
- Posts: 1077
- Joined: Sat Feb 25, 2006 6:35 pm
- Vehicle: ND - 2 GT
- Location: Berowra
- Contact:
Re:
Yes I reaslised that after I posted
green_comet wrote:Basically so it looks something like this
Obviously the car aint his... hes asked "so it looks like this"... refering to someone elses car, and also its left hand drive meaning its more than likely from the states. His location says melbourne.. read dude..
*calm's down*
sorry dont know what came over me.
Current: Red 04 SE (Slightly modified) - 133rwkw@7psi - Winner of the Mania Dyno Day 2008
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
Re: Painting the instrument cluster dome thingy hahaha
initial_mx5 wrote:I was wondering, would it be possible to paint it? Or i should be more specific, what paint should i use and what adverse affects should i expect?
to do it properly, lightly sand it, spray it with plastic adhesion primer, spray it with paint primer, spray it with paint, spray it with clear coat. it will need some light sanding between all these coats. all up cost will be less than $40 & it will look good.
-
- Driver
- Posts: 85
- Joined: Sun May 22, 2005 8:06 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
- RaYmO
- Racing Driver
- Posts: 587
- Joined: Tue Mar 07, 2006 6:45 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Re:
zhenjie wrote:Just be aware that you might experience some glare from a glossy paint job. My mx-5 import from Japan had the cover painted and when its sunny I experienced some really annoying glare that gets reflected from the windscreen.
A pair of polarised sunglasses will fix that problem
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 208 guests