CD/Tuner Dead?

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, -alex, miata, zombie, Andrew

Post Reply
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

CD/Tuner Dead?

Postby JBT » Thu Jun 22, 2006 5:23 pm

So, I'm driving along and all of a sudden the radio goes dead. Still indicates it is receiving all the presets but no sound :( . I stop and realise that the volume output is very low even though the volume control is in the normal place. So I turn it up and it sounds a bit better but not a \"full\" sound....a bit \"tinny\". Hmmmmm........put in a CD............almost have a heart attack when it starts playing because volume setting is still high :shock: .

So, the volume control is OK with a CD but cr@p with the tuner. It's a Sony head unit about 8(?) years old, no external amplifier and just feeds to two door speakers.

Is the HU dead inside somewhere?
Get a new one that will also play MP3?
Image
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Thu Jun 22, 2006 11:17 pm

I'll check it out, no manual for the thing. It was working fine........like it has for the last 3 years I've had the car..........and without doing anything the dumb thing just went to some half mute mode.
Image
Top
User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:
Contact jules

Postby jules » Fri Jun 23, 2006 10:31 am

Is that like a moodle number :mrgreen:

Miata, what advice would you give JBT in regards to his radio?


Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Fri Jun 23, 2006 11:39 am

Well I tried to Google the modle, the moodle and the model and found a manual for the CD/Tuner which, as it turns out, is a CDX-4800X. At least I know how to work the thing now :mrgreen: Reset, pulled it out, looked hard at it, tried the technical tap, put it back in and everything but could not fix the problem. :roll: .

Looks like I'll have to look around for a similar newbie.....with MP3 this time. Thanks for the help Ralphff.
Image
Top
User avatar
RaYmO
Racing Driver
Posts: 587
Joined: Tue Mar 07, 2006 6:45 pm
Vehicle: ND - 2 GT
Location: Sydney

Postby RaYmO » Fri Jun 23, 2006 12:01 pm

Get the JVC AVX2 8)

Image
Image
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re:

Postby JBT » Fri Jun 23, 2006 12:30 pm

DCMau wrote: :lol: Maybe you didn't look at it in the correct way, or the tap was in the wrong direction. :shock:

I'm sure I did it right.......maybe I shouldn'ta orta sworn at it :shock:

DCMau wrote: If you get a new one then maybe you will be lucky with the cradle and wiring harness still being the same.

Yeah, that's why I'm thinking another Sony 8)
Image
Top
User avatar
jules
Guitar Hero
Posts: 3562
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Sydney, previously HQ - GC Dodgy Inc.
Contact:
Contact jules

Re:

Postby jules » Fri Jun 23, 2006 12:59 pm

RaYmO wrote:Get the JVC AVX2 8)

Image



Oh. I can sooo see "Ye Old Bloke" with that headunit.


Jules
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
Image
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Fri Jun 23, 2006 1:34 pm

Oh, silly me, I thought that was a TV :oops: . It looks bigger than the car :shock:
Image
Top
User avatar
RaYmO
Racing Driver
Posts: 587
Joined: Tue Mar 07, 2006 6:45 pm
Vehicle: ND - 2 GT
Location: Sydney

Re:

Postby RaYmO » Fri Jun 23, 2006 2:33 pm

JBT wrote:Oh, silly me, I thought that was a TV :oops: . It looks bigger than the car :shock:


Believe it or not it fits in a single DIN slot 8)
Image
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Fri Jun 23, 2006 3:06 pm

But howya supposed to work it without knobs mate :?: :shock:
Image
Top
User avatar
Bevan
Speed Racer
Posts: 2599
Joined: Tue Nov 16, 2004 8:18 pm
Vehicle: ND - 2 GT
Location: N-West Sydney

Re:

Postby Bevan » Fri Jun 23, 2006 3:14 pm

JBT wrote:But howya supposed to work it without knobs mate :?: :shock:
This is the female version JBT. You gotta push the right buttons. :wink: :mrgreen: 8)
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Postby JBT » Fri Jun 23, 2006 3:25 pm

ooooOOOOOoooo......I see what you mean there Bevan.........naa.....too many distractions :)
Image
Top
User avatar
RaYmO
Racing Driver
Posts: 587
Joined: Tue Mar 07, 2006 6:45 pm
Vehicle: ND - 2 GT
Location: Sydney

Re:

Postby RaYmO » Fri Jun 23, 2006 3:58 pm

JBT wrote:But howya supposed to work it without knobs mate :?: :shock:


The same way you'd operate an iPod 8)
Image
Top
User avatar
AJ
Speed Racer
Posts: 4349
Joined: Sun Oct 30, 2005 8:27 pm
Vehicle: NC
Location: Gold Coast

Re:

Postby AJ » Fri Jun 23, 2006 6:31 pm

JBT wrote:But howya supposed to work it without knobs mate :?: :shock:



ROFLMFAO :lol: :lol: :lol: :lol:


you old blokes like to fiddle with ya knobs don't ya???? :lol: :lol:
Image
Don't worry about what people think, they don't do it very often
XMX5 Rogues
Top
User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re:

Postby JBT » Fri Jun 23, 2006 9:54 pm

AJ wrote:you old blokes like to fiddle with ya knobs don't ya???? :lol: :lol:

It's called reminiscing :mrgreen: .
Image
Top
Post Reply

Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 9 guests